view tests/test-histedit-no-change.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

test for old histedit issue #6:
editing a changeset without any actual change would corrupt the repository

  $ . "$TESTDIR/histedit-helpers.sh"

  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > histedit=
  > EOF

  $ initrepo ()
  > {
  >     dir="$1"
  >     comment="$2"
  >     if [ -n "${comment}" ]; then
  >         echo % ${comment}
  >         echo % ${comment} | sed 's:.:-:g'
  >     fi
  >     hg init ${dir}
  >     cd ${dir}
  >     for x in a b c d e f ; do
  >         echo $x > $x
  >         hg add $x
  >         hg ci -m $x
  >     done
  >     cd ..
  > }

  $ geneditor ()
  > {
  >     # generate an editor script for selecting changesets to be edited
  >     choice=$1  # changesets that should be edited (using sed line ranges)
  >     cat <<EOF | sed 's:^....::'
  >     # editing the rules, replacing 'pick' with 'edit' for the chosen lines
  >     sed '${choice}s:^pick:edit:' "\$1" > "\${1}.tmp"
  >     mv "\${1}.tmp" "\$1"
  >     # displaying the resulting rules, minus comments and empty lines
  >     sed '/^#/d;/^$/d;s:^:| :' "\$1" >&2
  > EOF
  > }

  $ startediting ()
  > {
  >     # begin an editing session
  >     choice="$1"  # changesets that should be edited
  >     number="$2"  # number of changesets considered (from tip)
  >     comment="$3"
  >     geneditor "${choice}" > edit.sh
  >     echo % start editing the history ${comment}
  >     HGEDITOR="sh ./edit.sh" hg histedit -- -${number} 2>&1 | fixbundle
  > }

  $ continueediting ()
  > {
  >     # continue an edit already in progress
  >     editor="$1"  # message editor when finalizing editing
  >     comment="$2"
  >     echo % finalize changeset editing ${comment}
  >     HGEDITOR=${editor} hg histedit --continue 2>&1 | fixbundle
  > }

  $ graphlog ()
  > {
  >     comment="${1:-log}"
  >     echo % "${comment}"
  >     hg log -G --template '{rev} {node} \"{desc|firstline}\"\n'
  > }


  $ initrepo r1 "test editing with no change"
  % test editing with no change
  -----------------------------
  $ cd r1
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 2 3 "(not changing anything)" # edit the 2nd of 3 changesets
  % start editing the history (not changing anything)
  | pick 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  Make changes as needed, you may commit or record as needed now.
  When you are finished, run hg histedit --continue to resume.
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved


check state of working copy
  $ hg id
  794fe033d0a0 tip

  $ graphlog "log after history editing"
  % log after history editing
  @  5 794fe033d0a030f8df77c5de945fca35c9181c30 "f"
  |
  o  4 04d2fab980779f332dec458cc944f28de8b43435 "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

  $ cd ..

  $ initrepo r2 "test editing with no change, then abort"
  % test editing with no change, then abort
  -----------------------------------------
  $ cd r2
  $ graphlog "log before editing"
  % log before editing
  @  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  
  $ startediting 1,2 3 "(not changing anything)" # edit the 1st two of 3 changesets
  % start editing the history (not changing anything)
  | edit 055a42cdd887 3 d
  | edit e860deea161a 4 e
  | pick 652413bf663e 5 f
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  Make changes as needed, you may commit or record as needed now.
  When you are finished, run hg histedit --continue to resume.
  $ continueediting true "(leaving commit message unaltered)"
  % finalize changeset editing (leaving commit message unaltered)
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  Make changes as needed, you may commit or record as needed now.
  When you are finished, run hg histedit --continue to resume.
  $ graphlog "log after first edit"
  % log after first edit
  @  6 e5ae3ca2f1ffdbd89ec41ebc273a231f7c3022f2 "d"
  |
  | o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  | |
  | o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  | |
  | o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |/
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  o  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

abort editing session, after first forcibly updating away
  $ hg up 0
  abort: histedit in progress
  (use 'hg histedit --continue' or 'hg histedit --abort')
  [255]
  $ mv .hg/histedit-state .hg/histedit-state-ignore
  $ hg up 0
  0 files updated, 0 files merged, 3 files removed, 0 files unresolved
  $ mv .hg/histedit-state-ignore .hg/histedit-state
  $ hg sum
  parent: 0:cb9a9f314b8b 
   a
  branch: default
  commit: 1 added, 1 unknown (new branch head)
  update: 6 new changesets (update)
  hist:   2 remaining (histedit --continue)

  $ hg histedit --abort 2>&1 | fixbundle
  [1]

modified files should survive the abort when we've moved away already
  $ hg st
  A e
  ? edit.sh

  $ graphlog "log after abort"
  % log after abort
  o  5 652413bf663ef2a641cab26574e46d5f5a64a55a "f"
  |
  o  4 e860deea161a2f77de56603b340ebbb4536308ae "e"
  |
  o  3 055a42cdd88768532f9cf79daa407fc8d138de9b "d"
  |
  o  2 177f92b773850b59254aa5e923436f921b55483b "c"
  |
  o  1 d2ae7f538514cd87c17547b0de4cea71fe1af9fb "b"
  |
  @  0 cb9a9f314b8b07ba71012fcdbc544b5a4d82ff5b "a"
  

  $ cd ..