view tests/test-merge-commit.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

Check that renames are correctly saved by a commit after a merge

Test with the merge on 3 having the rename on the local parent

  $ hg init a
  $ cd a

  $ echo line1 > foo
  $ hg add foo
  $ hg ci -m '0: add foo'

  $ echo line2 >> foo
  $ hg ci -m '1: change foo'

  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg mv foo bar
  $ rm bar
  $ echo line0 > bar
  $ echo line1 >> bar
  $ hg ci -m '2: mv foo bar; change bar'
  created new head

  $ hg merge 1
  merging bar and foo to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with local rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:0555950ead28 2:0f2ff26688b9 1:5cd961e4045d 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 0555950ead28
   preserving bar for resolve of bar
   bar: versions differ -> m
  updating: bar 1/1 files (100.00%)
  picked tool 'internal:merge' for bar (binary False symlink False)
  merging bar
  my bar@2263c1be0967+ other bar@0555950ead28 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)


Same thing, but with the merge on 3 having the rename
on the remote parent:

  $ cd ..
  $ hg clone -U -r 1 -r 2 a b
  adding changesets
  adding manifests
  adding file changes
  added 3 changesets with 3 changes to 2 files (+1 heads)
  $ cd b

  $ hg up -C 1
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ hg merge 2
  merging foo and bar to bar
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line0
  line1
  line2

  $ hg ci -m '3: merge with remote rename'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)

  $ hg debugrename bar
  bar renamed from foo:9e25c27b87571a1edee5ae4dddee5687746cc8e2

  $ hg debugindex foo
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0       7  .....       0 690b295714ae 000000000000 000000000000 (re)
       1         7      13  .....       1 9e25c27b8757 690b295714ae 000000000000 (re)


Revert the content change from rev 2:

  $ hg up -C 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm bar
  $ echo line1 > bar
  $ hg ci -m '4: revert content change from rev 2'
  created new head

  $ hg log --template '{rev}:{node|short} {parents}\n'
  4:2263c1be0967 2:0f2ff26688b9 
  3:3ffa6b9e35f0 1:5cd961e4045d 2:0f2ff26688b9 
  2:0f2ff26688b9 0:2665aaee66e9 
  1:5cd961e4045d 
  0:2665aaee66e9 

This should use bar@rev2 as the ancestor:

  $ hg --debug merge 3
    searching for copies back to rev 1
  resolving manifests
   branchmerge: True, force: False, partial: False
   ancestor: 0f2ff26688b9, local: 2263c1be0967+, remote: 3ffa6b9e35f0
   preserving bar for resolve of bar
   bar: versions differ -> m
  updating: bar 1/1 files (100.00%)
  picked tool 'internal:merge' for bar (binary False symlink False)
  merging bar
  my bar@2263c1be0967+ other bar@3ffa6b9e35f0 ancestor bar@0f2ff26688b9
   premerge successful
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)

  $ cat bar
  line1
  line2

  $ hg ci -m '5: merge'

  $ hg debugindex bar
     rev    offset  length  ..... linkrev nodeid       p1           p2 (re)
       0         0      77  .....       2 d35118874825 000000000000 000000000000 (re)
       1        77      76  .....       3 5345f5ab8abd 000000000000 d35118874825 (re)
       2       153       7  .....       4 ff4b45017382 d35118874825 000000000000 (re)
       3       160      13  .....       5 3701b4893544 ff4b45017382 5345f5ab8abd (re)

  $ cd ..