view tests/test-mq-merge.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

Setup extension:

  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [mq]
  > git = keep
  > EOF

Test merge with mq changeset as the second parent:

  $ hg init m
  $ cd m
  $ touch a b c
  $ hg add a
  $ hg commit -m a
  $ hg add b
  $ hg qnew -d "0 0" b
  $ hg update 0
  0 files updated, 0 files merged, 1 files removed, 0 files unresolved
  $ hg add c
  $ hg commit -m c
  created new head
  $ hg merge
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg commit -m merge
  abort: cannot commit over an applied mq patch
  [255]
  $ cd ..

Issue529: mq aborts when merging patch deleting files

  $ checkundo()
  > {
  >     if [ -f .hg/store/undo ]; then
  >         echo ".hg/store/undo still exists"
  >     fi
  > }

Commit two dummy files in "init" changeset:

  $ hg init t
  $ cd t
  $ echo a > a
  $ echo b > b
  $ hg ci -Am init
  adding a
  adding b
  $ hg tag -l init

Create a patch removing a:

  $ hg qnew rm_a
  $ hg rm a
  $ hg qrefresh -m "rm a"

Save the patch queue so we can merge it later:

  $ hg qsave -c -e
  copy $TESTTMP/t/.hg/patches to $TESTTMP/t/.hg/patches.1 (glob)
  $ checkundo

Update b and commit in an "update" changeset:

  $ hg up -C init
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo b >> b
  $ hg st
  M b
  $ hg ci -m update
  created new head

# Here, qpush used to abort with :
# The system cannot find the file specified => a
  $ hg manifest
  a
  b

  $ hg qpush -a -m
  merging with queue at: $TESTTMP/t/.hg/patches.1 (glob)
  applying rm_a
  now at: rm_a

  $ checkundo
  $ hg manifest
  b

Ensure status is correct after merge:

  $ hg qpop -a
  popping rm_a
  popping .hg.patches.merge.marker
  patch queue now empty

  $ cd ..

Classic MQ merge sequence *with an explicit named queue*:

  $ hg init t2
  $ cd t2
  $ echo '[diff]' > .hg/hgrc
  $ echo 'nodates = 1' >> .hg/hgrc
  $ echo a > a
  $ hg ci -Am init
  adding a
  $ echo b > a
  $ hg ci -m changea
  $ hg up -C 0
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cp a aa
  $ echo c >> a
  $ hg qnew --git -f -e patcha
  $ echo d >> a
  $ hg qnew -d '0 0' -f -e patcha2

Create the reference queue:

  $ hg qsave -c -e -n refqueue
  copy $TESTTMP/t2/.hg/patches to $TESTTMP/t2/.hg/refqueue (glob)
  $ hg up -C 1
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved

Merge:

  $ HGMERGE=internal:other hg qpush -a -m -n refqueue
  merging with queue at: $TESTTMP/t2/.hg/refqueue (glob)
  applying patcha
  patching file a
  Hunk #1 succeeded at 2 with fuzz 1 (offset 0 lines).
  fuzz found when applying patch, stopping
  patch didn't work out, merging patcha
  1 files updated, 0 files merged, 1 files removed, 0 files unresolved
  0 files updated, 2 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  applying patcha2
  now at: patcha2

Check patcha is still a git patch:

  $ cat .hg/patches/patcha
  # HG changeset patch
  # Parent  d3873e73d99ef67873dac33fbcc66268d5d2b6f4
  
  diff --git a/a b/a
  --- a/a
  +++ b/a
  @@ -1,1 +1,2 @@
  -b
  +a
  +c
  diff --git a/a b/aa
  copy from a
  copy to aa
  --- a/a
  +++ b/aa
  @@ -1,1 +1,1 @@
  -b
  +a

Check patcha2 is still a regular patch:

  $ cat .hg/patches/patcha2
  # HG changeset patch
  # Date 0 0
  # Parent  ???????????????????????????????????????? (glob)
  
  diff -r ???????????? -r ???????????? a (glob)
  --- a/a
  +++ b/a
  @@ -1,2 +1,3 @@
   a
   c
  +d

  $ cd ..