view tests/test-obsolete-checkheads.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

Check that obsolete properly strip heads
  $ cat >> $HGRCPATH << EOF
  > [phases]
  > # public changeset are not obsolete
  > publish=false
  > [ui]
  > logtemplate='{node|short} ({phase}) {desc|firstline}\n'
  > [experimental]
  > evolution=createmarkers
  > EOF
  $ mkcommit() {
  >    echo "$1" > "$1"
  >    hg add "$1"
  >    hg ci -m "add $1"
  > }
  $ getid() {
  >    hg id --debug -ir "desc('$1')"
  > }


  $ hg init remote
  $ cd remote
  $ mkcommit base
  $ hg phase --public .
  $ cd ..
  $ cp -r remote base
  $ hg clone remote local
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local

New head replaces old head
==========================

setup
(we add the 1 flags to prevent bumped error during the test)

  $ mkcommit old
  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg debugobsolete --flags 1 `getid old` `getid new`
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup1

old exists remotely as draft. It is obsoleted by new that we now push.
Push should not warn about creating new head

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)

old head is now public (public local version)
=============================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg -R ../remote phase --public c70b08862e08
  $ hg pull -v
  pulling from $TESTTMP/remote (glob)
  searching for changes
  no changes found
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (public) add old
  |/
  o  b4952fcf48cf (public) add base
  

Abort: old will still be an head because it's public.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head 71e3228bffe1!
  (merge or see "hg help push" for details about pushing new heads)
  [255]

old head is now public (public remote version)
==============================================

TODO: Not implemented yet.

# setup
#
#   $ rm -fr ../remote
#   $ cp -r ../backup1 ../remote
#   $ hg -R ../remote phase --public c70b08862e08
#   $ hg phase --draft --force c70b08862e08
#   $ hg log -G --hidden
#   @  71e3228bffe1 (draft) add new
#   |
#   | x  c70b08862e08 (draft) add old
#   |/
#   o  b4952fcf48cf (public) add base
#
#
#
# Abort: old will still be an head because it's public.
#
#   $ hg push
#   pushing to $TESTTMP/remote
#   searching for changes
#   abort: push creates new remote head 71e3228bffe1!
#   (merge or see "hg help push" for details about pushing new heads)
#   [255]

old head is obsolete but replacement is not pushed
==================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ hg phase --draft --force '(0::) - 0'
  $ hg up -q '.^'
  $ mkcommit other
  created new head
  $ hg log -G --hidden
  @  d7d41ccbd4de (draft) add other
  |
  | o  71e3228bffe1 (draft) add new
  |/
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  

old exists remotely as draft. It is obsoleted by new but we don't push new.
Push should abort on new head

  $ hg push -r 'desc("other")'
  pushing to $TESTTMP/remote (glob)
  searching for changes
  abort: push creates new remote head d7d41ccbd4de!
  (merge or see "hg help push" for details about pushing new heads)
  [255]



Both precursors and successors are already know remotely. Descendant adds heads
===============================================================================

setup. (The obsolete marker is known locally only

  $ cd ..
  $ rm -rf local
  $ hg clone remote local
  updating to branch default
  2 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit old
  old already tracked!
  nothing changed
  [1]
  $ hg up -q '.^'
  $ mkcommit new
  created new head
  $ hg push -f
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  $ mkcommit desc1
  $ hg up -q '.^'
  $ mkcommit desc2
  created new head
  $ hg debugobsolete `getid old` `getid new`
  $ hg log -G --hidden
  @  5fe37041cc2b (draft) add desc2
  |
  | o  a3ef1d111c5f (draft) add desc1
  |/
  o  71e3228bffe1 (draft) add new
  |
  | x  c70b08862e08 (draft) add old
  |/
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  71e3228bffe1 (draft) add new
  |
  | o  c70b08862e08 (draft) add old
  |/
  @  b4952fcf48cf (public) add base
  
  $ cp -r ../remote ../backup2

Push should not warn about adding new heads. We create one, but we'll delete
one anyway.

  $ hg push
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files (+1 heads)


Remote head is unknown but obsoleted by a local changeset
=========================================================

setup

  $ rm -fr ../remote
  $ cp -r ../backup1 ../remote
  $ cd ..
  $ rm -rf local
  $ hg clone remote local -r 0
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd local
  $ mkcommit new
  $ hg -R ../remote id --debug -r tip
  c70b08862e0838ea6d7c59c85da2f1ed6c8d67da tip
  $ hg  id --debug -r tip
  71e3228bffe1886550777233d6c97bb5a6b2a650 tip
  $ hg debugobsolete c70b08862e0838ea6d7c59c85da2f1ed6c8d67da 71e3228bffe1886550777233d6c97bb5a6b2a650
  $ hg log -G --hidden
  @  71e3228bffe1 (draft) add new
  |
  o  b4952fcf48cf (public) add base
  
  $ hg log -G --hidden -R ../remote
  o  c70b08862e08 (draft) add old
  |
  @  b4952fcf48cf (public) add base
  

Push should not complain about new heads.

  $ hg push --traceback
  pushing to $TESTTMP/remote (glob)
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)