view tests/test-progress.t @ 23971:6becb9dbca25 stable

merge: mark .hgsubstate as possibly dirty before submerge for consistency

Before this patch, failure of updating subrepos may cause inconsistent
".hgsubstate". For example:

  1. dirstate entry for ".hgsubstate" of the parent repo is filled
     with valid size/date (via "hg state" or so)

  2. "hg update" is invoked at the parent repo

  3. ".hgsubstate" of the parent repo is updated on the filesystem as
     a part of "g"(et) action in "merge.applyupdates"

  4. it is assumed that size/date of ".hgsubstate" on the filesystem
     aren't changed from ones at (1)

     this is not so difficult condition, because just changing hash
     ids (every ids are same in length) in ".hgsubstate" doesn't
     change the file size of it

  5. "subrepo.submerge()" is invoked to update subrepos

  6. failure of updating in one of subrepos raises exception
     (e.g. "untracked file differs")

  7. "hg update" is aborted without updating dirstate of the parent repo

     dirstate entry for ".hgsubstate" still holds size/date at (1)

Then, ".hgsubstate" of the parent repo is treated as "CLEAN"
unexpectedly, because updating ".hgsubstate" at (3) doesn't change
size/date of it on the filesystem: see assumption at (4).

This inconsistent ".hgsubstate" status causes unexpected behavior, for
example:

  - "hg revert" forgets to revert ".hgsubstate"

  - "hg update" misunderstands that (not yet updated) subrepos diverge
    (then, it shows the prompt to confirm user's decision)

To avoid inconsistent ".hgsubstate" status above, this patch marks
".hgsubstate" as possibly dirty before "submerge" invocation.
"normallookup"-ed (= dirty) dirstate should be written out, even if
processing is aborted by failure.

This patch marks ".hgsubstate" as possibly dirty before "submerge",
also when it is removed or merged while merging, for safety. This
should prevent Mercurial from misunderstanding inconsistent
".hgsubstate" as clean.

To satisfy conditions at (1) and (4) above, this patch uses "hg status
--config debug.dirstate.delaywrite=2" (to fill valid size/date into
dirstate) and "touch" (to fix date of the file).

  $ cat > loop.py <<EOF
  > from mercurial import cmdutil, commands
  > import time
  > 
  > cmdtable = {}
  > command = cmdutil.command(cmdtable)
  > 
  > class incrementingtime(object):
  >     def __init__(self):
  >         self._time = 0.0
  >     def __call__(self):
  >         self._time += 0.25
  >         return self._time
  > time.time = incrementingtime()
  > 
  > @command('loop',
  >     [('', 'total', '', 'override for total'),
  >     ('', 'nested', False, 'show nested results'),
  >     ('', 'parallel', False, 'show parallel sets of results')],
  >     'hg loop LOOPS',
  >     norepo=True)
  > def loop(ui, loops, **opts):
  >     loops = int(loops)
  >     total = None
  >     if loops >= 0:
  >         total = loops
  >     if opts.get('total', None):
  >         total = int(opts.get('total'))
  >     nested = False
  >     if opts.get('nested', None):
  >         nested = True
  >     loops = abs(loops)
  > 
  >     for i in range(loops):
  >         ui.progress(topiclabel, i, getloopitem(i), 'loopnum', total)
  >         if opts.get('parallel'):
  >             ui.progress('other', i, 'other.%d' % i, 'othernum', total)
  >         if nested:
  >             nested_steps = 2
  >             if i and i % 4 == 0:
  >                 nested_steps = 5
  >             for j in range(nested_steps):
  >                 ui.progress(
  >                   'nested', j, 'nested.%d' % j, 'nestnum', nested_steps)
  >             ui.progress(
  >               'nested', None, 'nested.done', 'nestnum', nested_steps)
  >     ui.progress(topiclabel, None, 'loop.done', 'loopnum', total)
  > 
  > topiclabel = 'loop'
  > def getloopitem(i):
  >     return 'loop.%d' % i
  > 
  > EOF

  $ cp $HGRCPATH $HGRCPATH.orig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "format = topic bar number" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

test default params, display nothing because of delay

  $ hg -y loop 3
  $ echo "delay=0" >> $HGRCPATH
  $ echo "refresh=0" >> $HGRCPATH

test with delay=0, refresh=0

  $ hg -y loop 3
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


test nested short-lived topics (which shouldn't display with nestdelay):

  $ hg -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Test nested long-lived topic which has the same name as a short-lived
peer. We shouldn't get stuck showing the short-lived inner steps, and
should go back to skipping the inner steps when the slow nested step
finishes.

  $ hg -y loop 7 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/7\r (no-eol) (esc)
  loop [=====>                                          ] 1/7\r (no-eol) (esc)
  loop [============>                                   ] 2/7\r (no-eol) (esc)
  loop [===================>                            ] 3/7\r (no-eol) (esc)
  loop [==========================>                     ] 4/7\r (no-eol) (esc)
  nested [==========================>                   ] 3/5\r (no-eol) (esc)
  nested [===================================>          ] 4/5\r (no-eol) (esc)
  loop [=================================>              ] 5/7\r (no-eol) (esc)
  loop [========================================>       ] 6/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ hg --config progress.changedelay=0 -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
  $ hg loop 3 --parallel
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
test refresh is taken in account

  $ hg -y --config progress.refresh=100 loop 3

test format options 1

  $ hg -y --config 'progress.format=number topic item+2' loop 2
  \r (no-eol) (esc)
  0/2 loop lo\r (no-eol) (esc)
  1/2 loop lo\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options 2

  $ hg -y --config 'progress.format=number item-3 bar' loop 2
  \r (no-eol) (esc)
  0/2 p.0 [                                                 ]\r (no-eol) (esc)
  1/2 p.1 [=======================>                         ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options and indeterminate progress

  $ hg -y --config 'progress.format=number item bar' loop -- -2
  \r (no-eol) (esc)
  0 loop.0               [ <=>                              ]\r (no-eol) (esc)
  1 loop.1               [  <=>                             ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

make sure things don't fall over if count > total

  $ hg -y loop --total 4 6
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [===========>                                    ] 1/4\r (no-eol) (esc)
  loop [=======================>                        ] 2/4\r (no-eol) (esc)
  loop [===================================>            ] 3/4\r (no-eol) (esc)
  loop [===============================================>] 4/4\r (no-eol) (esc)
  loop [ <=>                                            ] 5/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test immediate progress completion

  $ hg -y loop 0

test delay time estimates

  $ cat > mocktime.py <<EOF
  > import os
  > import time
  > 
  > class mocktime(object):
  >     def __init__(self, increment):
  >         self.time = 0
  >         self.increment = increment
  >     def __call__(self):
  >         self.time += self.increment
  >         return self.time
  > 
  > def uisetup(ui):
  >     time.time = mocktime(int(os.environ.get('MOCKTIME', '11')))
  > EOF

  $ cp $HGRCPATH.orig $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mocktime=`pwd`/mocktime.py" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "delay=25" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

  $ hg -y loop 8
  \r (no-eol) (esc)
  loop [=========>                                ] 2/8 1m07s\r (no-eol) (esc)
  loop [===============>                            ] 3/8 56s\r (no-eol) (esc)
  loop [=====================>                      ] 4/8 45s\r (no-eol) (esc)
  loop [==========================>                 ] 5/8 34s\r (no-eol) (esc)
  loop [================================>           ] 6/8 23s\r (no-eol) (esc)
  loop [=====================================>      ] 7/8 12s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=10000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 8h21m\r (no-eol) (esc)
  loop [====================>                     ] 2/4 5h34m\r (no-eol) (esc)
  loop [==============================>           ] 3/4 2h47m\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=1000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 5w00d\r (no-eol) (esc)
  loop [====================>                     ] 2/4 3w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 11d14h\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ MOCKTIME=14000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 1y18w\r (no-eol) (esc)
  loop [===================>                     ] 2/4 46w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 23w02d\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Time estimates should not fail when there's no end point:
  $ hg -y loop -- -4
  \r (no-eol) (esc)
  loop [ <=>                                              ] 2\r (no-eol) (esc)
  loop [  <=>                                             ] 3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test line trimming by '[progress] width', when progress topic contains
multi-byte characters, of which length of byte sequence and columns in
display are different from each other.

  $ cp $HGRCPATH.orig $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress=
  > loop=`pwd`/loop.py
  > [progress]
  > assume-tty = 1
  > delay = 0
  > refresh = 0
  > EOF

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as topic label of progress
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8')
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic number
  > width= 12
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc)
              \r (no-eol) (esc)

test calculation of bar width, when progress topic contains multi-byte
characters, of which length of byte sequence and columns in display
are different from each other.

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic bar
  > width= 21
  > # progwidth should be 9 (= 21 - (8+1) - 3)
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [         ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==>      ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====>   ]\r (no-eol) (esc)
                       \r (no-eol) (esc)

test trimming progress items, when they contain multi-byte characters,
of which length of byte sequence and columns in display are different
from each other.

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as loop items of progress
  > loopitems = [
  >     u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns
  >     u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns
  >     u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns
  > ]
  > def getloopitem(i):
  >     return loopitems[i % len(loopitems)]
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at tail side
  > format = item+6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
                       \r (no-eol) (esc)

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at left side
  > format = item-6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc)
                       \r (no-eol) (esc)