view tests/test-convert-bzr.t @ 33116:6c113a7dec52

tests: use the system hg for examining the local repository

Most test scripts use "hg" to interact with a temporary test repository.
However a few tests also want to run hg commands to interact with the local
repository containing the mercurial source code.  Notably, many of the
test-check-* tests want to check local files and commit messages.

These tests were previously using the version of hg being tested to query the
source repository.  However, this will fail if the source repository requires
extensions or other settings not supported by the version of mercurial being
tested.  The source repository was typically initially cloned using the system
hg installation, so we should use the system hg installation to query it.

There was already a helpers-testrepo.sh script designed to help cope with
different requirements for the source repository versus the test repositories.
However, it only handled the evolve extension.  This new behavior works with
any extensions that are different between the system installation and the test
installation.

#require bzr

  $ . "$TESTDIR/bzr-definitions"

create and rename on the same file in the same step

  $ mkdir test-createandrename
  $ cd test-createandrename
  $ bzr init -q source

test empty repo conversion (issue3233)

  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...

back to the rename stuff

  $ cd source
  $ echo a > a
  $ echo c > c
  $ echo e > e
  $ bzr add -q a c e
  $ bzr commit -q -m 'Initial add: a, c, e'
  $ bzr mv a b
  a => b
  $ bzr mv c d
  c => d
  $ bzr mv e f
  e => f
  $ echo a2 >> a
  $ mkdir e
  $ bzr add -q a e
  $ bzr commit -q -m 'rename a into b, create a, rename c into d'
  $ cd ..
  $ hg convert source source-hg
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ glog -R source-hg
  o  1@source "rename a into b, create a, rename c into d" files: a b c d e f
  |
  o  0@source "Initial add: a, c, e" files: a c e
  

manifest

  $ hg manifest -R source-hg -r tip
  a
  b
  d
  f

test --rev option

  $ hg convert -r 1 source source-1-hg
  initializing destination source-1-hg repository
  scanning source...
  sorting...
  converting...
  0 Initial add: a, c, e
  $ glog -R source-1-hg
  o  0@source "Initial add: a, c, e" files: a c e
  

test with filemap

  $ cat > filemap <<EOF
  > exclude a
  > EOF
  $ hg convert --filemap filemap source source-filemap-hg
  initializing destination source-filemap-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial add: a, c, e
  0 rename a into b, create a, rename c into d
  $ hg -R source-filemap-hg manifest -r tip
  b
  d
  f

convert from lightweight checkout

  $ bzr checkout --lightweight source source-light
  $ hg convert -s bzr source-light source-light-hg
  initializing destination source-light-hg repository
  warning: lightweight checkouts may cause conversion failures, try with a regular branch instead.
  $TESTTMP/test-createandrename/source-light does not look like a Bazaar repository
  abort: source-light: missing or unsupported repository
  [255]

extract timestamps that look just like hg's {date|isodate}:
yyyy-mm-dd HH:MM zzzz (no seconds!)
compare timestamps

  $ cd source
  $ bzr log | \
  >   sed '/timestamp/!d;s/.\{15\}\([0-9: -]\{16\}\):.. \(.[0-9]\{4\}\)/\1 \2/' \
  >   > ../bzr-timestamps
  $ cd ..
  $ hg -R source-hg log --template "{date|isodate}\n" > hg-timestamps
  $ cmp bzr-timestamps hg-timestamps || diff -u bzr-timestamps hg-timestamps
  $ cd ..

merge

  $ mkdir test-merge
  $ cd test-merge
  $ cat > helper.py <<EOF
  > import sys
  > from bzrlib import workingtree
  > wt = workingtree.WorkingTree.open('.')
  > 
  > message, stamp = sys.argv[1:]
  > wt.commit(message, timestamp=int(stamp))
  > EOF
  $ bzr init -q source
  $ cd source
  $ echo content > a
  $ echo content2 > b
  $ bzr add -q a b
  $ bzr commit -q -m 'Initial add'
  $ cd ..
  $ bzr branch -q source source-improve
  $ cd source
  $ echo more >> a
  $ $PYTHON ../helper.py 'Editing a' 100
  $ cd ../source-improve
  $ echo content3 >> b
  $ $PYTHON ../helper.py 'Editing b' 200
  $ cd ../source
  $ bzr merge -q ../source-improve
  $ bzr commit -q -m 'Merged improve branch'
  $ cd ..
  $ hg convert --datesort source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  3 Initial add
  2 Editing a
  1 Editing b
  0 Merged improve branch
  $ glog -R source-hg
  o    3@source "Merged improve branch" files:
  |\
  | o  2@source-improve "Editing b" files: b
  | |
  o |  1@source "Editing a" files: a
  |/
  o  0@source "Initial add" files: a b
  
  $ cd ..

#if symlink execbit

symlinks and executable files

  $ mkdir test-symlinks
  $ cd test-symlinks
  $ bzr init -q source
  $ cd source
  $ touch program
  $ chmod +x program
  $ ln -s program altname
  $ mkdir d
  $ echo a > d/a
  $ ln -s a syma
  $ bzr add -q altname program syma d/a
  $ bzr commit -q -m 'Initial setup'
  $ touch newprog
  $ chmod +x newprog
  $ rm altname
  $ ln -s newprog altname
  $ chmod -x program
  $ bzr add -q newprog
  $ bzr commit -q -m 'Symlink changed, x bits changed'
  $ cd ..
  $ hg convert source source-hg
  initializing destination source-hg repository
  scanning source...
  sorting...
  converting...
  1 Initial setup
  0 Symlink changed, x bits changed
  $ manifest source-hg 0
  % manifest of 0
  644 @ altname
  644   d/a
  755 * program
  644 @ syma
  $ manifest source-hg tip
  % manifest of tip
  644 @ altname
  644   d/a
  755 * newprog
  644   program
  644 @ syma

test the symlinks can be recreated

  $ cd source-hg
  $ hg up
  5 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ hg cat syma; echo
  a
  $ cd ../..

#endif

Multiple branches

  $ bzr init-repo -q --no-trees repo
  $ bzr init -q repo/trunk
  $ bzr co repo/trunk repo-trunk
  $ cd repo-trunk
  $ echo a > a
  $ bzr add -q a
  $ bzr ci -qm adda
  $ bzr tag trunk-tag
  Created tag trunk-tag.
  $ bzr switch -b branch
  Tree is up to date at revision 1.
  Switched to branch: *repo/branch/ (glob)
  $ sleep 1
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ bzr tag branch-tag
  Created tag branch-tag.
  $ bzr switch --force ../repo/trunk
  Updated to revision 1.
  Switched to branch: */repo/trunk/ (glob)
  $ sleep 1
  $ echo a >> a
  $ bzr ci -qm changea
  $ cd ..
  $ hg convert --datesort repo repo-bzr
  initializing destination repo-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags
  $ (cd repo-bzr; glog)
  o  3@default "update tags" files: .hgtags
  |
  o  2@default "changea" files: a
  |
  | o  1@branch "addb" files: b
  |/
  o  0@default "adda" files: a
  

Test tags (converted identifiers are not stable because bzr ones are
not and get incorporated in extra fields).

  $ hg -R repo-bzr tags
  tip                                3:* (glob)
  branch-tag                         1:* (glob)
  trunk-tag                          0:* (glob)

Nested repositories (issue3254)

  $ bzr init-repo -q --no-trees repo/inner
  $ bzr init -q repo/inner/trunk
  $ bzr co repo/inner/trunk inner-trunk
  $ cd inner-trunk
  $ echo b > b
  $ bzr add -q b
  $ bzr ci -qm addb
  $ cd ..
  $ hg convert --datesort repo noinner-bzr
  initializing destination noinner-bzr repository
  scanning source...
  sorting...
  converting...
  2 adda
  1 addb
  0 changea
  updating tags