Mercurial > hg
view tests/test-exchange-obsmarkers-case-B4.t @ 33116:6c113a7dec52
tests: use the system hg for examining the local repository
Most test scripts use "hg" to interact with a temporary test repository.
However a few tests also want to run hg commands to interact with the local
repository containing the mercurial source code. Notably, many of the
test-check-* tests want to check local files and commit messages.
These tests were previously using the version of hg being tested to query the
source repository. However, this will fail if the source repository requires
extensions or other settings not supported by the version of mercurial being
tested. The source repository was typically initially cloned using the system
hg installation, so we should use the system hg installation to query it.
There was already a helpers-testrepo.sh script designed to help cope with
different requirements for the source repository versus the test repositories.
However, it only handled the evolve extension. This new behavior works with
any extensions that are different between the system installation and the test
installation.
author | Adam Simpkins <simpkins@fb.com> |
---|---|
date | Tue, 27 Jun 2017 17:24:31 -0700 |
parents | 4a4fa665e1b4 |
children |
line wrap: on
line source
============================================ Testing obsolescence markers push: Cases B.4 ============================================ Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of all changesets that requested to be "in sync" after the push (even if they are already on both side). This test belongs to a series of tests checking such set is properly computed and applied. This does not tests "obsmarkers" discovery capabilities. Category B: pruning case TestCase 4: Pruned changeset on common part of the history Variants: # a: explicite push # b: bare push B.4 Pruned changeset on common part of history ============================================= .. {{{ .. ⊗ C .. | ● B .. | | .. | ● A .. |/ .. ● O .. }}} .. .. Marker exist from: .. .. * C (prune) .. .. Command run: .. .. * hg push -r B .. * hg push .. .. Expected exchange: .. .. * prune for C Setup ----- $ . $TESTDIR/testlib/exchange-obsmarker-util.sh initial $ setuprepos B.4 creating test repo for test case B.4 - pulldest - main - pushdest cd into `main` and proceed with env setup $ cd main $ mkcommit A $ mkcommit B $ hg phase --public . $ hg push ../pushdest pushing to ../pushdest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 2 changesets with 2 changes to 2 files $ hg push ../pulldest pushing to ../pulldest searching for changes remote: adding changesets remote: adding manifests remote: adding file changes remote: added 2 changesets with 2 changes to 2 files $ hg update -q 0 $ mkcommit C created new head $ hg prune -qd '0 0' . $ hg log -G --hidden x 7f7f229b13a6 (draft): C | | o f6fbb35d8ac9 (public): B | | | o f5bc6836db60 (public): A |/ @ a9bdc8b26820 (public): O $ inspect_obsmarkers obsstore content ================ 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} $ cd .. $ cd .. $ cp -R B.4 B.4.a $ cp -R B.4 B.4.b Actual Test (explicit push version) ----------------------------------- $ dotest B.4.a O ## Running testcase B.4.a # testing echange of "O" (a9bdc8b26820) ## initial state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing "O" from main to pushdest pushing to pushdest searching for changes no changes found remote: 1 new obsolescence markers ## post push state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling "a9bdc8b26820" from main into pulldest pulling from main no changes found 1 new obsolescence markers ## post pull state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} Actual Test (bare push version) ----------------------------------- $ dotest B.4.b ## Running testcase B.4.b ## initial state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest # obstore: pulldest ## pushing from main to pushdest pushing to pushdest searching for changes no changes found remote: 1 new obsolescence markers ## post push state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest ## pulling from main into pulldest pulling from main searching for changes no changes found 1 new obsolescence markers ## post pull state # obstore: main 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pushdest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'} # obstore: pulldest 7f7f229b13a629a5b20581c6cb723f4e2ca54bed 0 {a9bdc8b26820b1b87d585b82eb0ceb4a2ecdbc04} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}