tests: disable `test-git-interop.t` with a requirements directive
Note that the failures in this test affect all platforms.
I don't like this, but the test has been broken for awhile because of dirstate
API changes, and nobody noticed because the required `pygit2` package isn't
installed on the CI systems. I did install it on the mac CI system, which
triggers this failure. Disabling it is no worse than not running it due to the
missing package, but at least this way the CI systems can get the package
installed, and the test can be enabled and fixed eventually, without needing to
alter the CI systems.
The feature here is kind of abused. I thought about adding one specifically to
test for CI, but didn't feel like doing it at this point. Maybe if we need to
disable things to get the Windows CI off the ground (but that likely requires
testing for CI + platform).
$ cat << EOF >> $HGRCPATH
> [ui]
> interactive=yes
> EOF
$ hg init debugrevlog
$ cd debugrevlog
$ echo a > a
$ hg ci -Am adda
adding a
$ hg rm .
removing a
$ hg ci -Am make-it-empty
$ hg revert --all -r 0
adding a
$ hg ci -Am make-it-full
#if reporevlogstore
$ hg debugrevlog -c
format : 1
flags : (none)
revisions : 3
merges : 0 ( 0.00%)
normal : 3 (100.00%)
revisions : 3
empty : 0 ( 0.00%)
text : 0 (100.00%)
delta : 0 (100.00%)
snapshot : 3 (100.00%)
lvl-0 : 3 (100.00%)
deltas : 0 ( 0.00%)
revision size : 191
snapshot : 191 (100.00%)
lvl-0 : 191 (100.00%)
deltas : 0 ( 0.00%)
chunks : 3
0x75 (u) : 3 (100.00%)
chunks size : 191
0x75 (u) : 191 (100.00%)
total-stored-content: 188 bytes
avg chain length : 0
max chain length : 0
max chain reach : 67
compression ratio : 0
uncompressed data size (min/max/avg) : 57 / 66 / 62
full revision size (min/max/avg) : 58 / 67 / 63
inter-snapshot size (min/max/avg) : 0 / 0 / 0
delta size (min/max/avg) : 0 / 0 / 0
$ hg debugrevlog -m
format : 1
flags : inline, generaldelta
revisions : 3
merges : 0 ( 0.00%)
normal : 3 (100.00%)
revisions : 3
empty : 1 (33.33%)
text : 1 (100.00%)
delta : 0 ( 0.00%)
snapshot : 2 (66.67%)
lvl-0 : 2 (66.67%)
deltas : 0 ( 0.00%)
revision size : 88
snapshot : 88 (100.00%)
lvl-0 : 88 (100.00%)
deltas : 0 ( 0.00%)
chunks : 3
empty : 1 (33.33%)
0x75 (u) : 2 (66.67%)
chunks size : 88
empty : 0 ( 0.00%)
0x75 (u) : 88 (100.00%)
total-stored-content: 86 bytes
avg chain length : 0
max chain length : 0
max chain reach : 44
compression ratio : 0
uncompressed data size (min/max/avg) : 0 / 43 / 28
full revision size (min/max/avg) : 44 / 44 / 44
inter-snapshot size (min/max/avg) : 0 / 0 / 0
delta size (min/max/avg) : 0 / 0 / 0
$ hg debugrevlog a
format : 1
flags : inline, generaldelta
revisions : 1
merges : 0 ( 0.00%)
normal : 1 (100.00%)
revisions : 1
empty : 0 ( 0.00%)
text : 0 (100.00%)
delta : 0 (100.00%)
snapshot : 1 (100.00%)
lvl-0 : 1 (100.00%)
deltas : 0 ( 0.00%)
revision size : 3
snapshot : 3 (100.00%)
lvl-0 : 3 (100.00%)
deltas : 0 ( 0.00%)
chunks : 1
0x75 (u) : 1 (100.00%)
chunks size : 3
0x75 (u) : 3 (100.00%)
total-stored-content: 2 bytes
avg chain length : 0
max chain length : 0
max chain reach : 3
compression ratio : 0
uncompressed data size (min/max/avg) : 2 / 2 / 2
full revision size (min/max/avg) : 3 / 3 / 3
inter-snapshot size (min/max/avg) : 0 / 0 / 0
delta size (min/max/avg) : 0 / 0 / 0
#endif
Test debugindex, with and without the --verbose/--debug flag
$ hg debugrevlogindex a
rev linkrev nodeid p1 p2
0 0 b789fdd96dc2 000000000000 000000000000
#if no-reposimplestore
$ hg --verbose debugrevlogindex a
rev offset length linkrev nodeid p1 p2
0 0 3 0 b789fdd96dc2 000000000000 000000000000
$ hg --debug debugrevlogindex a
rev offset length linkrev nodeid p1 p2
0 0 3 0 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
#endif
$ hg debugrevlogindex -f 1 a
rev flag size link p1 p2 nodeid
0 0000 2 0 -1 -1 b789fdd96dc2
#if no-reposimplestore
$ hg --verbose debugrevlogindex -f 1 a
rev flag offset length size link p1 p2 nodeid
0 0000 0 3 2 0 -1 -1 b789fdd96dc2
$ hg --debug debugrevlogindex -f 1 a
rev flag offset length size link p1 p2 nodeid
0 0000 0 3 2 0 -1 -1 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3
#endif
$ hg debugindex -c
rev linkrev nodeid p1-nodeid p2-nodeid
0 0 07f494440405 000000000000 000000000000
1 1 8cccb4b5fec2 07f494440405 000000000000
2 2 b1e228c512c5 8cccb4b5fec2 000000000000
$ hg debugindex -c --debug
rev rank linkrev nodeid p1-rev p1-nodeid p2-rev p2-nodeid full-size delta-base flags comp-mode data-offset chunk-size sd-comp-mode sidedata-offset sd-chunk-size
0 -1 0 07f4944404050f47db2e5c5071e0e84e7a27bba9 -1 0000000000000000000000000000000000000000 -1 0000000000000000000000000000000000000000 57 0 0 2 0 58 inline 0 0
1 -1 1 8cccb4b5fec20cafeb99dd01c26d4dee8ea4388a 0 07f4944404050f47db2e5c5071e0e84e7a27bba9 -1 0000000000000000000000000000000000000000 66 1 0 2 58 67 inline 0 0
2 -1 2 b1e228c512c5d7066d70562ed839c3323a62d6d2 1 8cccb4b5fec20cafeb99dd01c26d4dee8ea4388a -1 0000000000000000000000000000000000000000 65 2 0 2 125 66 inline 0 0
$ hg debugindex -m
rev linkrev nodeid p1-nodeid p2-nodeid
0 0 a0c8bcbbb45c 000000000000 000000000000
1 1 57faf8a737ae a0c8bcbbb45c 000000000000
2 2 a35b10320954 57faf8a737ae 000000000000
$ hg debugindex -m --debug
rev rank linkrev nodeid p1-rev p1-nodeid p2-rev p2-nodeid full-size delta-base flags comp-mode data-offset chunk-size sd-comp-mode sidedata-offset sd-chunk-size
0 -1 0 a0c8bcbbb45c63b90b70ad007bf38961f64f2af0 -1 0000000000000000000000000000000000000000 -1 0000000000000000000000000000000000000000 43 0 0 2 0 44 inline 0 0
1 -1 1 57faf8a737ae7faf490582941a82319ba6529dca 0 a0c8bcbbb45c63b90b70ad007bf38961f64f2af0 -1 0000000000000000000000000000000000000000 0 1 0 2 44 0 inline 0 0
2 -1 2 a35b103209548032201c16c7688cb2657f037a38 1 57faf8a737ae7faf490582941a82319ba6529dca -1 0000000000000000000000000000000000000000 43 2 0 2 44 44 inline 0 0
$ hg debugindex a
rev linkrev nodeid p1-nodeid p2-nodeid
0 0 b789fdd96dc2 000000000000 000000000000
$ hg debugindex --debug a
rev rank linkrev nodeid p1-rev p1-nodeid p2-rev p2-nodeid full-size delta-base flags comp-mode data-offset chunk-size sd-comp-mode sidedata-offset sd-chunk-size
0 -1 0 b789fdd96dc2f3bd229c1dd8eedf0fc60e2b68e3 -1 0000000000000000000000000000000000000000 -1 0000000000000000000000000000000000000000 2 0 0 2 0 3 inline 0 0
debugdelta chain basic output
#if reporevlogstore pure rust
$ hg debugindexstats
abort: debugindexstats only works with native C code
[255]
#endif
#if reporevlogstore no-pure no-rust
$ hg debugindexstats
node trie capacity: 4
node trie count: 2
node trie depth: 1
node trie last rev scanned: -1 (no-rust !)
node trie last rev scanned: 3 (rust !)
node trie lookups: 3 (no-rust !)
node trie lookups: 2 (rust !)
node trie misses: 1
node trie splits: 1
revs in memory: 3
#endif
#if reporevlogstore no-pure
$ hg debugdeltachain -m --all-info
rev p1 p2 chain# chainlen prev delta size rawsize chainsize ratio lindist extradist extraratio readsize largestblk rddensity srchunks
0 -1 -1 1 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1
1 0 -1 2 1 -1 base 0 0 0 0.00000 0 0 0.00000 0 0 1.00000 1
2 1 -1 3 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1
$ hg debugdeltachain -m -T '{rev} {chainid} {chainlen}\n'
0 1 1
1 2 1
2 3 1
$ hg debugdeltachain -m -Tjson --size-info
[
{
"chainid": 1,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"p1": -1,
"p2": -1,
"prevrev": -1,
"rev": 0,
"uncompsize": 43
},
{
"chainid": 2,
"chainlen": 1,
"chainratio": 0,
"chainsize": 0,
"compsize": 0,
"deltatype": "base",
"p1": 0,
"p2": -1,
"prevrev": -1,
"rev": 1,
"uncompsize": 0
},
{
"chainid": 3,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"p1": 1,
"p2": -1,
"prevrev": -1,
"rev": 2,
"uncompsize": 43
}
]
$ hg debugdeltachain -m -Tjson --all-info
[
{
"chainid": 1,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"extradist": 0,
"extraratio": 0.0,
"largestblock": 44,
"lindist": 44,
"p1": -1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 0,
"srchunks": 1,
"uncompsize": 43
},
{
"chainid": 2,
"chainlen": 1,
"chainratio": 0,
"chainsize": 0,
"compsize": 0,
"deltatype": "base",
"extradist": 0,
"extraratio": 0,
"largestblock": 0,
"lindist": 0,
"p1": 0,
"p2": -1,
"prevrev": -1,
"readdensity": 1,
"readsize": 0,
"rev": 1,
"srchunks": 1,
"uncompsize": 0
},
{
"chainid": 3,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"extradist": 0,
"extraratio": 0.0,
"largestblock": 44,
"lindist": 44,
"p1": 1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 2,
"srchunks": 1,
"uncompsize": 43
}
]
debugdelta chain with sparse read enabled
$ cat >> $HGRCPATH <<EOF
> [experimental]
> sparse-read = True
> EOF
$ hg debugdeltachain -m --all-info
rev p1 p2 chain# chainlen prev delta size rawsize chainsize ratio lindist extradist extraratio readsize largestblk rddensity srchunks
0 -1 -1 1 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1
1 0 -1 2 1 -1 base 0 0 0 0.00000 0 0 0.00000 0 0 1.00000 1
2 1 -1 3 1 -1 base 44 43 44 1.02326 44 0 0.00000 44 44 1.00000 1
$ hg debugdeltachain -m --sparse-info -T '{rev} {chainid} {chainlen} {readsize} {largestblock} {readdensity}\n'
0 1 1 44 44 1.0
1 2 1 0 0 1
2 3 1 44 44 1.0
$ hg debugdeltachain -m -Tjson --sparse-info
[
{
"chainid": 1,
"chainlen": 1,
"deltatype": "base",
"largestblock": 44,
"p1": -1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 0,
"srchunks": 1
},
{
"chainid": 2,
"chainlen": 1,
"deltatype": "base",
"largestblock": 0,
"p1": 0,
"p2": -1,
"prevrev": -1,
"readdensity": 1,
"readsize": 0,
"rev": 1,
"srchunks": 1
},
{
"chainid": 3,
"chainlen": 1,
"deltatype": "base",
"largestblock": 44,
"p1": 1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 2,
"srchunks": 1
}
]
$ hg debugdeltachain -m -Tjson --all-info
[
{
"chainid": 1,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"extradist": 0,
"extraratio": 0.0,
"largestblock": 44,
"lindist": 44,
"p1": -1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 0,
"srchunks": 1,
"uncompsize": 43
},
{
"chainid": 2,
"chainlen": 1,
"chainratio": 0,
"chainsize": 0,
"compsize": 0,
"deltatype": "base",
"extradist": 0,
"extraratio": 0,
"largestblock": 0,
"lindist": 0,
"p1": 0,
"p2": -1,
"prevrev": -1,
"readdensity": 1,
"readsize": 0,
"rev": 1,
"srchunks": 1,
"uncompsize": 0
},
{
"chainid": 3,
"chainlen": 1,
"chainratio": 1.0232558139534884,
"chainsize": 44,
"compsize": 44,
"deltatype": "base",
"extradist": 0,
"extraratio": 0.0,
"largestblock": 44,
"lindist": 44,
"p1": 1,
"p2": -1,
"prevrev": -1,
"readdensity": 1.0,
"readsize": 44,
"rev": 2,
"srchunks": 1,
"uncompsize": 43
}
]
$ printf "This test checks things.\n" >> a
$ hg ci -m a
$ hg branch other
marked working directory as branch other
(branches are permanent and global, did you want a bookmark?)
$ for i in `$TESTDIR/seq.py 5`; do
> printf "shorter ${i}" >> a
> hg ci -m "a other:$i"
> hg up -q default
> printf "for the branch default we want longer chains: ${i}" >> a
> hg ci -m "a default:$i"
> hg up -q other
> done
$ hg debugdeltachain a -T '{rev} {srchunks}\n' --all-info\
> --config experimental.sparse-read.density-threshold=0.50 \
> --config experimental.sparse-read.min-gap-size=0
0 1
1 1
2 1
3 1
4 1
5 1
6 1
7 1
8 1
9 1
10 2 (no-zstd !)
10 1 (zstd !)
11 1
$ hg --config extensions.strip= strip --no-backup -r 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Test max chain len
$ cat >> $HGRCPATH << EOF
> [format]
> maxchainlen=4
> EOF
$ printf "This test checks if maxchainlen config value is respected also it can serve as basic test for debugrevlog -d <file>.\n" >> a
$ hg ci -m a
$ printf "b\n" >> a
$ hg ci -m a
$ printf "c\n" >> a
$ hg ci -m a
$ printf "d\n" >> a
$ hg ci -m a
$ printf "e\n" >> a
$ hg ci -m a
$ printf "f\n" >> a
$ hg ci -m a
$ printf 'g\n' >> a
$ hg ci -m a
$ printf 'h\n' >> a
$ hg ci -m a
$ hg debugrevlog -d a
# rev p1rev p2rev start end deltastart base p1 p2 rawsize totalsize compression heads chainlen
0 -1 -1 0 ??? 0 0 0 0 ??? ???? ? 1 0 (glob)
1 0 -1 ??? ??? 0 0 0 0 ??? ???? ? 1 1 (glob)
2 1 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 2 (glob)
3 2 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 3 (glob)
4 3 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 4 (glob)
5 4 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 0 (glob)
6 5 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 1 (glob)
7 6 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 2 (glob)
8 7 -1 ??? ??? ??? ??? ??? 0 ??? ???? ? 1 3 (glob)
#endif
Test debuglocks command:
$ hg debuglocks
lock: free
wlock: free
* Test setting the lock
$ dolock() {
> {
> "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/unlock
> rm -f .hg/unlock
> echo y
> } | hg debuglocks "$@" > /dev/null
> }
$ dolock -s &
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/store/lock
$ hg debuglocks
lock: user *, process * (*s) (glob)
wlock: free
[1]
$ touch .hg/unlock
$ wait
$ [ -f .hg/store/lock ] || echo "There is no lock"
There is no lock
* Test setting the wlock
$ dolock -S &
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/wlock
$ hg debuglocks
lock: free
wlock: user *, process * (*s) (glob)
[1]
$ touch .hg/unlock
$ wait
$ [ -f .hg/wlock ] || echo "There is no wlock"
There is no wlock
* Test setting both locks
$ dolock -Ss &
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/wlock
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/store/lock
$ hg debuglocks
lock: user *, process * (*s) (glob)
wlock: user *, process * (*s) (glob)
[2]
* Test failing to set a lock
$ hg debuglocks -s
abort: lock is already held
[255]
$ hg debuglocks -S
abort: wlock is already held
[255]
$ touch .hg/unlock
$ wait
$ hg debuglocks
lock: free
wlock: free
* Test forcing the lock
$ dolock -s &
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/store/lock
$ hg debuglocks
lock: user *, process * (*s) (glob)
wlock: free
[1]
$ hg debuglocks -L
$ hg debuglocks
lock: free
wlock: free
$ touch .hg/unlock
$ wait
* Test forcing the wlock
$ dolock -S &
$ "$RUNTESTDIR/testlib/wait-on-file" 5 .hg/wlock
$ hg debuglocks
lock: free
wlock: user *, process * (*s) (glob)
[1]
$ hg debuglocks -W
$ hg debuglocks
lock: free
wlock: free
$ touch .hg/unlock
$ wait
Test WdirUnsupported exception
$ hg debugdata -c ffffffffffffffffffffffffffffffffffffffff
abort: working directory revision cannot be specified
[255]
Test cache warming command
$ rm -rf .hg/cache/
$ hg debugupdatecaches --debug
updating the branch cache
$ ls -r .hg/cache/*
.hg/cache/tags2-served
.hg/cache/tags2
.hg/cache/rbc-revs-v2
.hg/cache/rbc-names-v2
.hg/cache/hgtagsfnodes1
.hg/cache/branch2-served
Test debug::unbundle
$ hg bundle --exact --rev tip foo.hg
1 changesets found
$ hg debug::unbundle foo.hg
adding changesets
adding manifests
adding file changes
added 0 changesets with 0 changes to 1 files (no-pure !)
Test debugcolor
#if no-windows
$ hg debugcolor --style --color always | grep -E 'mode|style|log\.'
color mode: 'ansi'
available style:
\x1b[0;33mlog.changeset\x1b[0m: \x1b[0;33myellow\x1b[0m (esc)
#endif
$ hg debugcolor --style --color never
color mode: None
available style:
$ cd ..
Test internal debugstacktrace command
$ cat > debugstacktrace.py << EOF
> from mercurial import (
> util,
> )
> from mercurial.utils import (
> procutil,
> )
> def f():
> util.debugstacktrace(f=procutil.stdout)
> g()
> def g():
> util.dst(b'hello from g\\n', skip=1)
> h()
> def h():
> util.dst(b'hi ...\\nfrom h hidden in g', 1, depth=2)
> f()
> EOF
$ "$PYTHON" debugstacktrace.py
stacktrace at:
*debugstacktrace.py:15 in * (glob)
*debugstacktrace.py:8 in f (glob)
hello from g at:
*debugstacktrace.py:15 in * (glob)
*debugstacktrace.py:9 in f (glob)
hi ...
from h hidden in g at:
*debugstacktrace.py:9 in f (glob)
*debugstacktrace.py:12 in g (glob)
Test debugcapabilities command:
$ hg debugcapabilities ./debugrevlog/
Main capabilities:
branchmap
$USUAL_BUNDLE2_CAPS$
getbundle
known
lookup
pushkey
unbundle
Bundle2 capabilities:
HG20
bookmarks
changegroup
01
02
03
checkheads
related
digests
md5
sha1
sha512
error
abort
unsupportedcontent
pushraced
pushkey
hgtagsfnodes
listkeys
phases
heads
pushkey
remote-changegroup
http
https
stream
v2
Test debugpeer
$ hg debugpeer ssh://user@dummy/debugrevlog
url: ssh://user@dummy/debugrevlog
local: no
pushable: yes
#if rust
$ hg --debug debugpeer ssh://user@dummy/debugrevlog
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R debugrevlog serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 473
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlog-compression-zstd,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/debugrevlog
local: no
pushable: yes
#endif
#if no-rust zstd
$ hg --debug debugpeer ssh://user@dummy/debugrevlog
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R debugrevlog serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 473
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlog-compression-zstd,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/debugrevlog
local: no
pushable: yes
#endif
#if no-rust no-zstd
$ hg --debug debugpeer ssh://user@dummy/debugrevlog
running .* ".*[/\\]dummyssh" ['"]user@dummy['"] ['"]hg -R debugrevlog serve --stdio['"] (re)
devel-peer-request: hello+between
devel-peer-request: pairs: 81 bytes
sending hello command
sending between command
remote: 449
remote: capabilities: batch branchmap $USUAL_BUNDLE2_CAPS$ changegroupsubset getbundle known lookup protocaps pushkey streamreqs=generaldelta,revlogv1,sparserevlog unbundle=HG10GZ,HG10BZ,HG10UN unbundlehash
remote: 1
devel-peer-request: protocaps
devel-peer-request: caps: * bytes (glob)
sending protocaps command
url: ssh://user@dummy/debugrevlog
local: no
pushable: yes
#endif
Test debugshell
$ hg debugshell -c 'ui.write(b"%s\n" % ui.username())'
test