view tests/test-contrib-testparseutil.t @ 48670:6d2ddea0721a stable

stream-clone: filter possible missing requirements using all supported one

The `supportedformat` requirements is missing some important requirements and it
seems better to filter out with all requirements we know, not just an
"arbitrary" subset.

The `supportedformat` set is lacking some important requirements (for example
`revlog-compression-zstd`). This is getting fixed on default (for Mercurial 6.1)

However, fixing that in 6.1 means the stream requirements sent over the wire
will contains more items. And if we don't apply this fix on older version, they
might end up complaining about lacking support for feature they actually support
for years.

This patch does not fix the deeper problem (advertised stream requirement
lacking some of them), but focus on the trivial part : Lets use the full set of
supported requirement for looking for unsupported ones.

This patch should be simple to backport to older version of Mercurial and
packager should be encouraged to do so.

This is a graft of d9017df70135 from default.

Differential Revision: https://phab.mercurial-scm.org/D12091

  $ testparseutil="$TESTDIR"/../contrib/testparseutil.py

Internal test by doctest

  $ "$PYTHON" -m doctest "$testparseutil"

Tests for embedded python script

Typical cases

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF
  >   >>> for f in [1, 2, 3]:
  >   ...     foo = 1
  >   >>> foo = 2
  >   $ echo "doctest is terminated by command, empty line, or comment"
  >   >>> foo = 31
  >   expected output of doctest fragment
  >   >>> foo = 32
  >   
  >   >>> foo = 33
  > 
  >   >>> foo = 34
  > comment
  >   >>> foo = 35
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 4
  >   > 
  >   > EOF
  >   $ cat > foo.py <<EOF
  >   > foo = 5
  >   > EOF
  >   $ cat >> foo.py <<EOF
  >   > foo = 6 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ "\$PYTHON" <<NO_CHECK_EOF
  >   > foo = 7 # this should be ignored at detection
  >   > NO_CHECK_EOF
  >   $ cat > foo.py <<NO_CHECK_EOF
  >   > foo = 8 # this should be ignored at detection
  >   > NO_CHECK_EOF
  > 
  > doctest fragment ended by EOF
  > 
  >   >>> foo = 9
  > NO_CHECK_EOF
  <stdin>:1: <anonymous> starts
    |for f in [1, 2, 3]:
    |    foo = 1
    |foo = 2
  <stdin>:4: <anonymous> ends
  <stdin>:5: <anonymous> starts
    |foo = 31
    |
    |foo = 32
    |
    |foo = 33
  <stdin>:10: <anonymous> ends
  <stdin>:11: <anonymous> starts
    |foo = 34
  <stdin>:12: <anonymous> ends
  <stdin>:13: <anonymous> starts
    |foo = 35
  <stdin>:14: <anonymous> ends
  <stdin>:16: <anonymous> starts
    |foo = 4
    |
  <stdin>:18: <anonymous> ends
  <stdin>:20: foo.py starts
    |foo = 5
  <stdin>:21: foo.py ends
  <stdin>:23: foo.py starts
    |foo = 6 # appended
  <stdin>:24: foo.py ends
  <stdin>:38: <anonymous> starts
    |foo = 9
  <stdin>:39: <anonymous> ends

Invalid test script

(similar test for shell script and hgrc configuration is omitted,
because this tests common base class of them)

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF > detected
  >   $ "\$PYTHON" <<EOF
  >   > foo = 1
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 2
  >   $ cat > bar.py <<EOF
  >   > bar = 2 # this fragment will be detected as expected
  >   > EOF
  > 
  >   $ cat > foo.py <<EOF
  >   > foo = 3
  > NO_CHECK_EOF
  <stdin>:3: unexpected line for "heredoc python invocation"
  <stdin>:6: unexpected line for "heredoc python invocation"
  <stdin>:11: unexpected end of file for "heredoc .py file"
  [1]
  $ cat detected
  <stdin>:7: bar.py starts
    |bar = 2 # this fragment will be detected as expected
  <stdin>:8: bar.py ends

Tests for embedded shell script

  $ "$PYTHON" "$testparseutil" -v shembedded <<NO_CHECK_EOF
  >   $ cat > foo.sh <<EOF
  >   > foo = 1
  >   > 
  >   > foo = 2
  >   > EOF
  >   $ cat >> foo.sh <<EOF
  >   > foo = 3 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > foo.sh <<NO_CHECK_EOF
  >   > # this should be ignored at detection
  >   > foo = 4
  >   > NO_CHECK_EOF
  > 
  > NO_CHECK_EOF
  <stdin>:2: foo.sh starts
    |foo = 1
    |
    |foo = 2
  <stdin>:5: foo.sh ends
  <stdin>:7: foo.sh starts
    |foo = 3 # appended
  <stdin>:8: foo.sh ends

Tests for embedded hgrc configuration

  $ "$PYTHON" "$testparseutil" -v hgrcembedded <<NO_CHECK_EOF
  >   $ cat > .hg/hgrc <<EOF
  >   > [ui]
  >   > verbose = true
  >   > 
  >   > # end of local configuration
  >   > EOF
  > 
  >   $ cat > \$HGRCPATH <<EOF
  >   > [extensions]
  >   > rebase =
  >   > # end of global configuration
  >   > EOF
  > 
  >   $ cat >> \$HGRCPATH <<EOF
  >   > # appended
  >   > [extensions]
  >   > rebase =!
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > .hg/hgrc <<NO_CHECK_EOF
  >   > # this local configuration should be ignored at detection
  >   > [ui]
  >   > username = foo bar
  >   > NO_CHECK_EOF
  > 
  >   $ cat > \$HGRCPATH <<NO_CHECK_EOF
  >   > # this global configuration should be ignored at detection
  >   > [extensions]
  >   > foobar =
  >   > NO_CHECK_EOF
  > NO_CHECK_EOF
  <stdin>:2: .hg/hgrc starts
    |[ui]
    |verbose = true
    |
    |# end of local configuration
  <stdin>:6: .hg/hgrc ends
  <stdin>:9: $HGRCPATH starts
    |[extensions]
    |rebase =
    |# end of global configuration
  <stdin>:12: $HGRCPATH ends
  <stdin>:15: $HGRCPATH starts
    |# appended
    |[extensions]
    |rebase =!
  <stdin>:18: $HGRCPATH ends