view tests/test-pull-update.t @ 48670:6d2ddea0721a stable

stream-clone: filter possible missing requirements using all supported one

The `supportedformat` requirements is missing some important requirements and it
seems better to filter out with all requirements we know, not just an
"arbitrary" subset.

The `supportedformat` set is lacking some important requirements (for example
`revlog-compression-zstd`). This is getting fixed on default (for Mercurial 6.1)

However, fixing that in 6.1 means the stream requirements sent over the wire
will contains more items. And if we don't apply this fix on older version, they
might end up complaining about lacking support for feature they actually support
for years.

This patch does not fix the deeper problem (advertised stream requirement
lacking some of them), but focus on the trivial part : Lets use the full set of
supported requirement for looking for unsupported ones.

This patch should be simple to backport to older version of Mercurial and
packager should be encouraged to do so.

This is a graft of d9017df70135 from default.

Differential Revision: https://phab.mercurial-scm.org/D12091

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am m
  adding foo

  $ cd ..
  $ hg clone t tt
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd tt
  $ echo 1.1 > foo
  $ hg ci -Am m

  $ cd ../t
  $ echo 1.2 > foo
  $ hg ci -Am m

Should respect config to disable dirty update
  $ hg co -qC 0
  $ echo 2 > foo
  $ hg --config commands.update.check=abort pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  1 local changesets published
  abort: uncommitted changes
  [20]
  $ hg --config extensions.strip= strip --no-backup tip
  $ hg co -qC tip

Should not update to the other topological branch:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "800c91d5bfc1: m"
  1 other heads for branch "default"

  $ cd ../tt

Should not update to the other branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 800c91d5bfc1
  1 local changesets published
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "107cefe13e42: m"
  1 other heads for branch "default"

  $ HGMERGE=true hg merge
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mm

  $ cd ../t

Should work:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)
  new changesets 483b76ad4309
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Similarity between "hg update" and "hg pull -u" in handling bookmark
====================================================================

Test that updating activates the bookmark, which matches with the
explicit destination of the update.

  $ echo 4 >> foo
  $ hg commit -m "#4"
  $ hg bookmark active-after-pull
  $ cd ../tt

(1) activating by --rev BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) activating by URL#BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

Test that updating deactivates current active bookmark, if the
destination of the update is explicitly specified, and it doesn't
match with the name of any existing bookmarks.

  $ cd ../t
  $ hg bookmark -d active-after-pull
  $ hg branch bar -q
  $ hg commit -m "#5 (bar #1)"
  $ cd ../tt

(1) deactivating by --rev REV

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r b5e4babfaaa7
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) deactivating by --branch BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -b bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(3) deactivating by URL#ANOTHER-BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

  $ cd ..

Issue622: hg init && hg pull -u URL doesn't checkout default branch

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ hg addremove
  adding foo
  $ hg commit -m 1
  $ cd ..

  $ hg init empty
  $ cd empty
  $ hg pull -u ../test
  pulling from ../test
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved