view mercurial/commandserver.py @ 17245:6e84171a61c8 stable

largefiles: fix path handling for cp/mv (issue3516)

Previously, a copy or a move of a largefile only worked if the cwd was the root
of the repository.  The first issue was that the destination path passed to
os.mkdirs() chopped the absolute path to the standin after '.hglf/', which
essentially created a path relative to the repository root.  Similarly, the
second issue was that the source and dest paths for copyfile() were relative to
the repo root.  This converts these three paths to absolute paths.

Some notable issues, regardless of the directory in which the cp/mv is executed:

1) The copy is not being recorded in lfdirstate, but it is in dirstate for the
standins.  I'm not sure if this is by design (i.e. minimal info in lfdirstate).

2) status -C doesn't behave as expected.  Using the testcase as an example:

  # after mv + ci
  $ hg status -C -v --rev '.^'     # expected to see 'A' and ' ' lines too
  R dira\dirb\largefile

  $ hg status -C -v --rev '.^' foo/largefile
  # no output                      # expected to see 'A' and ' ' lines only

  $ hg status -C -v --rev '.^' foo/
  # no output                      # expected to see 'A', ' ' and 'R' lines

  $ hg status -C -v --rev '.^' ./  # expected to see 'A' and ' ' lines too
  R dirb\largefile

  $ hg status -C -v --rev '.^' ../.hglf/dira/foo/largefile
  A ..\.hglf\dira\foo\largefile
    ..\.hglf\dira\dirb\largefile  # no 'R' expected when new file is specified

  $ hg status -C -v --rev '.^' ../.hglf   # OK
  A ..\.hglf\dira\foo\largefile
    ..\.hglf\dira\dirb\largefile
  R ..\.hglf\dira\dirb\largefile

# commandserver.py - communicate with Mercurial's API over a pipe
#
#  Copyright Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from i18n import _
import struct
import sys, os
import dispatch, encoding, util

logfile = None

def log(*args):
    if not logfile:
        return

    for a in args:
        logfile.write(str(a))

    logfile.flush()

class channeledoutput(object):
    """
    Write data from in_ to out in the following format:

    data length (unsigned int),
    data
    """
    def __init__(self, in_, out, channel):
        self.in_ = in_
        self.out = out
        self.channel = channel

    def write(self, data):
        if not data:
            return
        self.out.write(struct.pack('>cI', self.channel, len(data)))
        self.out.write(data)
        self.out.flush()

    def __getattr__(self, attr):
        if attr in ('isatty', 'fileno'):
            raise AttributeError, attr
        return getattr(self.in_, attr)

class channeledinput(object):
    """
    Read data from in_.

    Requests for input are written to out in the following format:
    channel identifier - 'I' for plain input, 'L' line based (1 byte)
    how many bytes to send at most (unsigned int),

    The client replies with:
    data length (unsigned int), 0 meaning EOF
    data
    """

    maxchunksize = 4 * 1024

    def __init__(self, in_, out, channel):
        self.in_ = in_
        self.out = out
        self.channel = channel

    def read(self, size=-1):
        if size < 0:
            # if we need to consume all the clients input, ask for 4k chunks
            # so the pipe doesn't fill up risking a deadlock
            size = self.maxchunksize
            s = self._read(size, self.channel)
            buf = s
            while s:
                s = self._read(size, self.channel)
                buf += s

            return buf
        else:
            return self._read(size, self.channel)

    def _read(self, size, channel):
        if not size:
            return ''
        assert size > 0

        # tell the client we need at most size bytes
        self.out.write(struct.pack('>cI', channel, size))
        self.out.flush()

        length = self.in_.read(4)
        length = struct.unpack('>I', length)[0]
        if not length:
            return ''
        else:
            return self.in_.read(length)

    def readline(self, size=-1):
        if size < 0:
            size = self.maxchunksize
            s = self._read(size, 'L')
            buf = s
            # keep asking for more until there's either no more or
            # we got a full line
            while s and s[-1] != '\n':
                s = self._read(size, 'L')
                buf += s

            return buf
        else:
            return self._read(size, 'L')

    def __iter__(self):
        return self

    def next(self):
        l = self.readline()
        if not l:
            raise StopIteration
        return l

    def __getattr__(self, attr):
        if attr in ('isatty', 'fileno'):
            raise AttributeError, attr
        return getattr(self.in_, attr)

class server(object):
    """
    Listens for commands on stdin, runs them and writes the output on a channel
    based stream to stdout.
    """
    def __init__(self, ui, repo, mode):
        self.cwd = os.getcwd()

        logpath = ui.config("cmdserver", "log", None)
        if logpath:
            global logfile
            if logpath == '-':
                # write log on a special 'd'ebug channel
                logfile = channeledoutput(sys.stdout, sys.stdout, 'd')
            else:
                logfile = open(logpath, 'a')

        # the ui here is really the repo ui so take its baseui so we don't end
        # up with its local configuration
        self.ui = repo.baseui
        self.repo = repo
        self.repoui = repo.ui

        if mode == 'pipe':
            self.cerr = channeledoutput(sys.stderr, sys.stdout, 'e')
            self.cout = channeledoutput(sys.stdout, sys.stdout, 'o')
            self.cin = channeledinput(sys.stdin, sys.stdout, 'I')
            self.cresult = channeledoutput(sys.stdout, sys.stdout, 'r')

            self.client = sys.stdin
        else:
            raise util.Abort(_('unknown mode %s') % mode)

    def _read(self, size):
        if not size:
            return ''

        data = self.client.read(size)

        # is the other end closed?
        if not data:
            raise EOFError

        return data

    def runcommand(self):
        """ reads a list of \0 terminated arguments, executes
        and writes the return code to the result channel """

        length = struct.unpack('>I', self._read(4))[0]
        if not length:
            args = []
        else:
            args = self._read(length).split('\0')

        # copy the uis so changes (e.g. --config or --verbose) don't
        # persist between requests
        copiedui = self.ui.copy()
        self.repo.baseui = copiedui
        self.repo.ui = self.repo.dirstate._ui = self.repoui.copy()
        self.repo.invalidate()
        self.repo.invalidatedirstate()

        req = dispatch.request(args[:], copiedui, self.repo, self.cin,
                               self.cout, self.cerr)

        ret = dispatch.dispatch(req) or 0 # might return None

        # restore old cwd
        if '--cwd' in args:
            os.chdir(self.cwd)

        self.cresult.write(struct.pack('>i', int(ret)))

    def getencoding(self):
        """ writes the current encoding to the result channel """
        self.cresult.write(encoding.encoding)

    def serveone(self):
        cmd = self.client.readline()[:-1]
        if cmd:
            handler = self.capabilities.get(cmd)
            if handler:
                handler(self)
            else:
                # clients are expected to check what commands are supported by
                # looking at the servers capabilities
                raise util.Abort(_('unknown command %s') % cmd)

        return cmd != ''

    capabilities = {'runcommand'  : runcommand,
                    'getencoding' : getencoding}

    def serve(self):
        hellomsg = 'capabilities: ' + ' '.join(self.capabilities.keys())
        hellomsg += '\n'
        hellomsg += 'encoding: ' + encoding.encoding

        # write the hello msg in -one- chunk
        self.cout.write(hellomsg)

        try:
            while self.serveone():
                pass
        except EOFError:
            # we'll get here if the client disconnected while we were reading
            # its request
            return 1

        return 0