httppeer: avoid another bad reference before assignment warning
This wasn't a problem, because `b''` from the `AttributeError` handler is in
`bundle2.bundletypes`, so the following loop and conditional always run at least
once. But PyCharm can't figure that out on its own, and it took a little
exploring to figure out it wasn't a problem. The usage in `bundle2.writebundle`
is to look it up in the map of bundle types, so it will break in a more obvious
way in the unlikely event that the empty string is removed from the map in the
future.
Test support for partial-resolution tools
Create a tool that resolves conflicts after line 5 by simply dropping those
lines (even if there are no conflicts there)
$ cat >> "$TESTTMP/head.sh" <<'EOF'
> #!/bin/sh
> for f in "$@"; do
> head -5 $f > tmp
> mv -f tmp $f
> done
> EOF
$ chmod +x "$TESTTMP/head.sh"
...and another tool that keeps only the last 5 lines instead of the first 5.
$ cat >> "$TESTTMP/tail.sh" <<'EOF'
> #!/bin/sh
> for f in "$@"; do
> tail -5 $f > tmp
> mv -f tmp $f
> done
> EOF
$ chmod +x "$TESTTMP/tail.sh"
Set up both tools to run on all patterns (the default), and let the `tail` tool
run after the `head` tool, which means it will have no effect (we'll override it
to test order later)
$ cat >> "$HGRCPATH" <<EOF
> [partial-merge-tools]
> head.executable=$TESTTMP/head.sh
> tail.executable=$TESTTMP/tail.sh
> tail.order=1
> EOF
$ make_commit() {
> echo "$@" | xargs -n1 > file
> hg add file 2> /dev/null
> hg ci -m "$*"
> }
Let a partial-resolution tool resolve some conflicts and leave other conflicts
for the regular merge tool (:merge3 here)
$ hg init repo
$ cd repo
$ make_commit a b c d e f
$ make_commit a b2 c d e f2
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ make_commit a b3 c d e f3
created new head
$ hg merge 1 -t :merge3
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
a
<<<<<<< working copy: e11a49d4b620 - test: a b3 c d e f3
b3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
b
=======
b2
>>>>>>> merge rev: fbc096a40cc5 - test: a b2 c d e f2
c
d
e
With premerge=keep, the partial-resolution tools runs before and doesn't see
the conflict markers
$ hg up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat >> .hg/hgrc <<EOF
> [merge-tools]
> my-local.executable = cat
> my-local.args = $local
> my-local.premerge = keep-merge3
> EOF
$ hg merge 1 -t my-local
merging file
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat file
a
<<<<<<< working copy: e11a49d4b620 - test: a b3 c d e f3
b3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
b
=======
b2
>>>>>>> merge rev: fbc096a40cc5 - test: a b2 c d e f2
c
d
e
When a partial-resolution tool resolves all conflicts, the resolution should
be recorded and the regular merge tool should not be invoked for the file.
$ hg up -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ make_commit a b c d e f2
created new head
$ hg up 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ make_commit a b c d e f3
created new head
$ hg merge 3 -t false
merging file
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat file
a
b
c
d
e
Can disable all partial merge tools (the `head` tool would have resolved this
conflict it had been enabled)
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :merge3 --config merge.disable-partial-tools=yes
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
a
b
c
d
e
<<<<<<< working copy: d57edaa6e21a - test: a b c d e f3
f3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
f
=======
f2
>>>>>>> merge rev: 8c217da987be - test: a b c d e f2
Can disable one partial merge tool (the `head` tool would have resolved this
conflict it had been enabled)
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :merge3 --config partial-merge-tools.head.disable=yes
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
b
c
d
e
<<<<<<< working copy: d57edaa6e21a - test: a b c d e f3
f3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
f
=======
f2
>>>>>>> merge rev: 8c217da987be - test: a b c d e f2
Only tools whose patterns match are run. We make `head` not match here, so
only `tail` should run
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :merge3 --config partial-merge-tools.head.patterns=other
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
b
c
d
e
<<<<<<< working copy: d57edaa6e21a - test: a b c d e f3
f3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
f
=======
f2
>>>>>>> merge rev: 8c217da987be - test: a b c d e f2
Filesets can be used to select which files to run partial merge tools on.
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :merge3 --config partial-merge-tools.head.patterns=set:other
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
b
c
d
e
<<<<<<< working copy: d57edaa6e21a - test: a b c d e f3
f3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
f
=======
f2
>>>>>>> merge rev: 8c217da987be - test: a b c d e f2
If there are several matching tools, they are run in requested order. We move
`head` after `tail` in order here so it has no effect (the conflict in "f" thus
remains).
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :merge3 --config partial-merge-tools.head.order=2
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat file
b
c
d
e
<<<<<<< working copy: d57edaa6e21a - test: a b c d e f3
f3
||||||| common ancestor: 8ae8bb9cc43a - test: a b c d e f
f
=======
f2
>>>>>>> merge rev: 8c217da987be - test: a b c d e f2
When using "nomerge" tools (e.g. `:other`), the partial-resolution tools
should not be run.
$ hg up -C 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 3 -t :other
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat file
a
b
c
d
e
f2
If a partial-resolution tool resolved some conflict and simplemerge can
merge the rest, then the regular merge tool should not be used. Here we merge
"a b c d e3 f3" with "a b2 c d e f2". The `head` tool resolves the conflict in
"f" and the internal simplemerge merges the remaining changes in "b" and "e".
$ hg up -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ make_commit a b c d e3 f3
created new head
$ hg merge 1 -t false
merging file
0 files updated, 1 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cat file
a
b2
c
d
e3
Test that arguments get passed as expected.
$ cat >> "$TESTTMP/log-args.sh" <<'EOF'
> #!/bin/sh
> echo "$@" > args.log
> EOF
$ chmod +x "$TESTTMP/log-args.sh"
$ cat >> "$HGRCPATH" <<EOF
> [partial-merge-tools]
> log-args.executable=$TESTTMP/log-args.sh
> EOF
$ hg up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 1
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat args.log
*/hgmerge-*/file~local */hgmerge-*/file~base */hgmerge-*/file~other (glob)
$ hg up -C 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 1 --config partial-merge-tools.log-args.args='--other $other $base --foo --local $local --also-other $other'
merging file
warning: conflicts while merging file! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
[1]
$ cat args.log
--other */hgmerge-*/file~other */hgmerge-*/file~base --foo --local */hgmerge-*/file~local --also-other */hgmerge-*/file~other (glob)