view hgext/strip.py @ 36528:72e487851a53

debugcommands: add debugwireproto command

We currently don't have a low-level mechanism for sending
arbitrary wire protocol commands. Having a generic and robust
mechanism for sending wire protocol commands, examining wire
data, etc would make it vastly easier to test the wire protocol
and debug server operation. This is a problem I've wanted a
solution for numerous times, especially recently as I've been
hacking on a new version of the wire protocol.

This commit establishes a `hg debugwireproto` command for sending
data to a peer.

The command invents a mini language for specifying actions to take.
This will enable a lot of flexibility for issuing commands and testing
variations for how commands are sent.

Right now, we only support low-level raw sends and receives. These
are probably the least valuable commands to intended users of this
command. But they are the most useful commands to implement to
bootstrap the feature (I've chosen to reimplement test-ssh-proto.t
using this command to prove its usefulness).

My eventual goal of `hg debugwireproto` is to allow calling wire
protocol commands with a human-friendly interface. Essentially,
people can type in a command name and arguments and
`hg debugwireproto` will figure out how to send that on the wire.
I'd love to eventually be able to save the server's raw response
to a file. This would allow us to e.g. call "getbundle" wire
protocol commands easily.

test-ssh-proto.t has been updated to use the new command in lieu
of piping directly to a server process. As part of the transition,
test behavior improved. Before, we piped all request data to the
server at once. Now, we have explicit control over the ordering of
operations. e.g. we can send one command, receive its response,
then send another command. This will allow us to more robustly
test race conditions, buffering behavior, etc.

There were some subtle changes in test behavior. For example,
previous behavior would often send trailing newlines to the server.
The new mechanism doesn't treat literal newlines specially and
requires newlines be escaped in the payload.

Because the new logging code is very low level, it is easy to
introduce race conditions in tests. For example, the number of bytes
returned by a read() may vary depending on load. This is why tests
make heavy use of "readline" for consuming data: the result of
that operation should be deterministic and not subject to race
conditions. There are still some uses of "readavailable." However,
those are only for reading from stderr. I was able to reproduce
timing issues with my system under load when using "readavailable"
globally. But if I "readline" to grab stdout, "readavailable"
appears to work deterministically for stderr. I think this is
because the server writes to stderr first. As long as the OS
delivers writes to pipes in the same order they were made, this
should work. If there are timing issues, we can introduce a
mechanism to readline from stderr.

Differential Revision: https://phab.mercurial-scm.org/D2392

"""strip changesets and their descendants from history

This extension allows you to strip changesets and all their descendants from the
repository. See the command help for details.
"""
from __future__ import absolute_import

from mercurial.i18n import _
from mercurial import (
    bookmarks as bookmarksmod,
    cmdutil,
    error,
    hg,
    lock as lockmod,
    merge,
    node as nodemod,
    pycompat,
    registrar,
    repair,
    scmutil,
    util,
)
nullid = nodemod.nullid
release = lockmod.release

cmdtable = {}
command = registrar.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

def checksubstate(repo, baserev=None):
    '''return list of subrepos at a different revision than substate.
    Abort if any subrepos have uncommitted changes.'''
    inclsubs = []
    wctx = repo[None]
    if baserev:
        bctx = repo[baserev]
    else:
        bctx = wctx.parents()[0]
    for s in sorted(wctx.substate):
        wctx.sub(s).bailifchanged(True)
        if s not in bctx.substate or bctx.sub(s).dirty():
            inclsubs.append(s)
    return inclsubs

def checklocalchanges(repo, force=False, excsuffix=''):
    cmdutil.checkunfinished(repo)
    s = repo.status()
    if not force:
        if s.modified or s.added or s.removed or s.deleted:
            _("local changes found") # i18n tool detection
            raise error.Abort(_("local changes found" + excsuffix))
        if checksubstate(repo):
            _("local changed subrepos found") # i18n tool detection
            raise error.Abort(_("local changed subrepos found" + excsuffix))
    return s

def _findupdatetarget(repo, nodes):
    unode, p2 = repo.changelog.parents(nodes[0])
    currentbranch = repo[None].branch()

    if (util.safehasattr(repo, 'mq') and p2 != nullid
        and p2 in [x.node for x in repo.mq.applied]):
        unode = p2
    elif currentbranch != repo[unode].branch():
        pwdir = 'parents(wdir())'
        revset = 'max(((parents(%ln::%r) + %r) - %ln::%r) and branch(%s))'
        branchtarget = repo.revs(revset, nodes, pwdir, pwdir, nodes, pwdir,
                                 currentbranch)
        if branchtarget:
            cl = repo.changelog
            unode = cl.node(branchtarget.first())

    return unode

def strip(ui, repo, revs, update=True, backup=True, force=None, bookmarks=None):
    with repo.wlock(), repo.lock():

        if update:
            checklocalchanges(repo, force=force)
            urev = _findupdatetarget(repo, revs)
            hg.clean(repo, urev)
            repo.dirstate.write(repo.currenttransaction())

        repair.strip(ui, repo, revs, backup)

        repomarks = repo._bookmarks
        if bookmarks:
            with repo.transaction('strip') as tr:
                if repo._activebookmark in bookmarks:
                    bookmarksmod.deactivate(repo)
                repomarks.applychanges(repo, tr, [(b, None) for b in bookmarks])
            for bookmark in sorted(bookmarks):
                ui.write(_("bookmark '%s' deleted\n") % bookmark)

@command("strip",
         [
          ('r', 'rev', [], _('strip specified revision (optional, '
                               'can specify revisions without this '
                               'option)'), _('REV')),
          ('f', 'force', None, _('force removal of changesets, discard '
                                 'uncommitted changes (no backup)')),
          ('', 'no-backup', None, _('no backups')),
          ('', 'nobackup', None, _('no backups (DEPRECATED)')),
          ('n', '', None, _('ignored  (DEPRECATED)')),
          ('k', 'keep', None, _("do not modify working directory during "
                                "strip")),
          ('B', 'bookmark', [], _("remove revs only reachable from given"
                                  " bookmark"))],
          _('hg strip [-k] [-f] [-B bookmark] [-r] REV...'))
def stripcmd(ui, repo, *revs, **opts):
    """strip changesets and all their descendants from the repository

    The strip command removes the specified changesets and all their
    descendants. If the working directory has uncommitted changes, the
    operation is aborted unless the --force flag is supplied, in which
    case changes will be discarded.

    If a parent of the working directory is stripped, then the working
    directory will automatically be updated to the most recent
    available ancestor of the stripped parent after the operation
    completes.

    Any stripped changesets are stored in ``.hg/strip-backup`` as a
    bundle (see :hg:`help bundle` and :hg:`help unbundle`). They can
    be restored by running :hg:`unbundle .hg/strip-backup/BUNDLE`,
    where BUNDLE is the bundle file created by the strip. Note that
    the local revision numbers will in general be different after the
    restore.

    Use the --no-backup option to discard the backup bundle once the
    operation completes.

    Strip is not a history-rewriting operation and can be used on
    changesets in the public phase. But if the stripped changesets have
    been pushed to a remote repository you will likely pull them again.

    Return 0 on success.
    """
    opts = pycompat.byteskwargs(opts)
    backup = True
    if opts.get('no_backup') or opts.get('nobackup'):
        backup = False

    cl = repo.changelog
    revs = list(revs) + opts.get('rev')
    revs = set(scmutil.revrange(repo, revs))

    with repo.wlock():
        bookmarks = set(opts.get('bookmark'))
        if bookmarks:
            repomarks = repo._bookmarks
            if not bookmarks.issubset(repomarks):
                raise error.Abort(_("bookmark '%s' not found") %
                    ','.join(sorted(bookmarks - set(repomarks.keys()))))

            # If the requested bookmark is not the only one pointing to a
            # a revision we have to only delete the bookmark and not strip
            # anything. revsets cannot detect that case.
            nodetobookmarks = {}
            for mark, node in repomarks.iteritems():
                nodetobookmarks.setdefault(node, []).append(mark)
            for marks in nodetobookmarks.values():
                if bookmarks.issuperset(marks):
                    rsrevs = repair.stripbmrevset(repo, marks[0])
                    revs.update(set(rsrevs))
            if not revs:
                with repo.lock(), repo.transaction('bookmark') as tr:
                    bmchanges = [(b, None) for b in bookmarks]
                    repomarks.applychanges(repo, tr, bmchanges)
                for bookmark in sorted(bookmarks):
                    ui.write(_("bookmark '%s' deleted\n") % bookmark)

        if not revs:
            raise error.Abort(_('empty revision set'))

        descendants = set(cl.descendants(revs))
        strippedrevs = revs.union(descendants)
        roots = revs.difference(descendants)

        # if one of the wdir parent is stripped we'll need
        # to update away to an earlier revision
        update = any(p != nullid and cl.rev(p) in strippedrevs
                     for p in repo.dirstate.parents())

        rootnodes = set(cl.node(r) for r in roots)

        q = getattr(repo, 'mq', None)
        if q is not None and q.applied:
            # refresh queue state if we're about to strip
            # applied patches
            if cl.rev(repo.lookup('qtip')) in strippedrevs:
                q.applieddirty = True
                start = 0
                end = len(q.applied)
                for i, statusentry in enumerate(q.applied):
                    if statusentry.node in rootnodes:
                        # if one of the stripped roots is an applied
                        # patch, only part of the queue is stripped
                        start = i
                        break
                del q.applied[start:end]
                q.savedirty()

        revs = sorted(rootnodes)
        if update and opts.get('keep'):
            urev = _findupdatetarget(repo, revs)
            uctx = repo[urev]

            # only reset the dirstate for files that would actually change
            # between the working context and uctx
            descendantrevs = repo.revs(b"%d::.", uctx.rev())
            changedfiles = []
            for rev in descendantrevs:
                # blindly reset the files, regardless of what actually changed
                changedfiles.extend(repo[rev].files())

            # reset files that only changed in the dirstate too
            dirstate = repo.dirstate
            dirchanges = [f for f in dirstate if dirstate[f] != 'n']
            changedfiles.extend(dirchanges)

            repo.dirstate.rebuild(urev, uctx.manifest(), changedfiles)
            repo.dirstate.write(repo.currenttransaction())

            # clear resolve state
            merge.mergestate.clean(repo, repo['.'].node())

            update = False


        strip(ui, repo, revs, backup=backup, update=update,
              force=opts.get('force'), bookmarks=bookmarks)

    return 0