Mercurial > hg
view mercurial/dagparser.py @ 39872:733db72f0f54
revlog: move revision verification out of verify
File revision verification is performing low-level checks of file
storage, namely that flags are appropriate and revision data can
be resolved.
Since these checks are somewhat revlog-specific and may not
be appropriate for alternate storage backends, this commit moves
those checks from verify.py to revlog.py.
Because we're now emitting warnings/errors that apply to specific
revisions, we taught the iverifyproblem interface to expose the
problematic node and to report this node in verify output. This
was necessary to prevent unwanted test changes.
After this change, revlog.verifyintegrity() and file verify code
in verify.py both iterate over revisions and resolve their fulltext.
But they do so in separate loops. (verify.py needs to resolve
fulltexts as part of calling renamed() - at least when using revlogs.)
This should add overhead.
But on the mozilla-unified repo:
$ hg verify
before: time: real 700.640 secs (user 585.520+0.000 sys 23.480+0.000)
after: time: real 682.380 secs (user 570.370+0.000 sys 22.240+0.000)
I'm not sure what's going on. Maybe avoiding the filelog attribute
proxies shaved off enough time to offset the losses? Maybe fulltext
resolution has less overhead than I thought?
I've left a comment indicating the potential for optimization. But
because it doesn't produce a performance regression on a large
repository, I'm not going to worry about it.
Differential Revision: https://phab.mercurial-scm.org/D4745
author | Gregory Szorc <gregory.szorc@gmail.com> |
---|---|
date | Mon, 24 Sep 2018 11:27:47 -0700 |
parents | e7aa113b14f7 |
children | 2372284d9457 |
line wrap: on
line source
# dagparser.py - parser and generator for concise description of DAGs # # Copyright 2010 Peter Arrenbrecht <peter@arrenbrecht.ch> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import re import string from .i18n import _ from . import ( error, pycompat, ) from .utils import ( stringutil, ) def parsedag(desc): '''parses a DAG from a concise textual description; generates events "+n" is a linear run of n nodes based on the current default parent "." is a single node based on the current default parent "$" resets the default parent to -1 (implied at the start); otherwise the default parent is always the last node created "<p" sets the default parent to the backref p "*p" is a fork at parent p, where p is a backref "*p1/p2/.../pn" is a merge of parents p1..pn, where the pi are backrefs "/p2/.../pn" is a merge of the preceding node and p2..pn ":name" defines a label for the preceding node; labels can be redefined "@text" emits an annotation event for text "!command" emits an action event for the current node "!!my command\n" is like "!", but to the end of the line "#...\n" is a comment up to the end of the line Whitespace between the above elements is ignored. A backref is either * a number n, which references the node curr-n, where curr is the current node, or * the name of a label you placed earlier using ":name", or * empty to denote the default parent. All string valued-elements are either strictly alphanumeric, or must be enclosed in double quotes ("..."), with "\" as escape character. Generates sequence of ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', command) for actions (!) ('C', command) for line actions (!!) Examples -------- Example of a complex graph (output not shown for brevity): >>> len(list(parsedag(b""" ... ... +3 # 3 nodes in linear run ... :forkhere # a label for the last of the 3 nodes from above ... +5 # 5 more nodes on one branch ... :mergethis # label again ... <forkhere # set default parent to labeled fork node ... +10 # 10 more nodes on a parallel branch ... @stable # following nodes will be annotated as "stable" ... +5 # 5 nodes in stable ... !addfile # custom command; could trigger new file in next node ... +2 # two more nodes ... /mergethis # merge last node with labeled node ... +4 # 4 more nodes descending from merge node ... ... """))) 34 Empty list: >>> list(parsedag(b"")) [] A simple linear run: >>> list(parsedag(b"+3")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] Some non-standard ways to define such runs: >>> list(parsedag(b"+1+2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"+1*1*")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] >>> list(parsedag(b"*")) [('n', (0, [-1]))] >>> list(parsedag(b"...")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [1]))] A fork and a join, using numeric back references: >>> list(parsedag(b"+2*2*/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+2<2+1/2")) [('n', (0, [-1])), ('n', (1, [0])), ('n', (2, [0])), ('n', (3, [2, 1]))] Placing a label: >>> list(parsedag(b"+1 :mylabel +1")) [('n', (0, [-1])), ('l', (0, 'mylabel')), ('n', (1, [0]))] An empty label (silly, really): >>> list(parsedag(b"+1:+1")) [('n', (0, [-1])), ('l', (0, '')), ('n', (1, [0]))] Fork and join, but with labels instead of numeric back references: >>> list(parsedag(b"+1:f +1:p2 *f */p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] >>> list(parsedag(b"+1:f +1:p2 <f +1 /p2")) [('n', (0, [-1])), ('l', (0, 'f')), ('n', (1, [0])), ('l', (1, 'p2')), ('n', (2, [0])), ('n', (3, [2, 1]))] Restarting from the root: >>> list(parsedag(b"+1 $ +1")) [('n', (0, [-1])), ('n', (1, [-1]))] Annotations, which are meant to introduce sticky state for subsequent nodes: >>> list(parsedag(b"+1 @ann +1")) [('n', (0, [-1])), ('a', 'ann'), ('n', (1, [0]))] >>> list(parsedag(b'+1 @"my annotation" +1')) [('n', (0, [-1])), ('a', 'my annotation'), ('n', (1, [0]))] Commands, which are meant to operate on the most recently created node: >>> list(parsedag(b"+1 !cmd +1")) [('n', (0, [-1])), ('c', 'cmd'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !"my command" +1')) [('n', (0, [-1])), ('c', 'my command'), ('n', (1, [0]))] >>> list(parsedag(b'+1 !!my command line\\n +1')) [('n', (0, [-1])), ('C', 'my command line'), ('n', (1, [0]))] Comments, which extend to the end of the line: >>> list(parsedag(b'+1 # comment\\n+1')) [('n', (0, [-1])), ('n', (1, [0]))] Error: >>> try: list(parsedag(b'+1 bad')) ... except Exception as e: print(pycompat.sysstr(bytes(e))) invalid character in dag description: bad... ''' if not desc: return wordchars = pycompat.bytestr(string.ascii_letters + string.digits) labels = {} p1 = -1 r = 0 def resolve(ref): if not ref: return p1 elif ref[0] in pycompat.bytestr(string.digits): return r - int(ref) else: return labels[ref] chiter = pycompat.iterbytestr(desc) def nextch(): return next(chiter, '\0') def nextrun(c, allow): s = '' while c in allow: s += c c = nextch() return c, s def nextdelimited(c, limit, escape): s = '' while c != limit: if c == escape: c = nextch() s += c c = nextch() return nextch(), s def nextstring(c): if c == '"': return nextdelimited(nextch(), '"', '\\') else: return nextrun(c, wordchars) c = nextch() while c != '\0': while c in pycompat.bytestr(string.whitespace): c = nextch() if c == '.': yield 'n', (r, [p1]) p1 = r r += 1 c = nextch() elif c == '+': c, digs = nextrun(nextch(), pycompat.bytestr(string.digits)) n = int(digs) for i in pycompat.xrange(0, n): yield 'n', (r, [p1]) p1 = r r += 1 elif c in '*/': if c == '*': c = nextch() c, pref = nextstring(c) prefs = [pref] while c == '/': c, pref = nextstring(nextch()) prefs.append(pref) ps = [resolve(ref) for ref in prefs] yield 'n', (r, ps) p1 = r r += 1 elif c == '<': c, ref = nextstring(nextch()) p1 = resolve(ref) elif c == ':': c, name = nextstring(nextch()) labels[name] = p1 yield 'l', (p1, name) elif c == '@': c, text = nextstring(nextch()) yield 'a', text elif c == '!': c = nextch() if c == '!': cmd = '' c = nextch() while c not in '\n\r\0': cmd += c c = nextch() yield 'C', cmd else: c, cmd = nextstring(c) yield 'c', cmd elif c == '#': while c not in '\n\r\0': c = nextch() elif c == '$': p1 = -1 c = nextch() elif c == '\0': return # in case it was preceded by whitespace else: s = '' i = 0 while c != '\0' and i < 10: s += c i += 1 c = nextch() raise error.Abort(_('invalid character in dag description: ' '%s...') % s) def dagtextlines(events, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates single lines for dagtext()''' def wrapstring(text): if re.match("^[0-9a-z]*$", text): return text return '"' + text.replace('\\', '\\\\').replace('"', '\"') + '"' def gen(): labels = {} run = 0 wantr = 0 needroot = False for kind, data in events: if kind == 'n': r, ps = data # sanity check if r != wantr: raise error.Abort(_("expected id %i, got %i") % (wantr, r)) if not ps: ps = [-1] else: for p in ps: if p >= r: raise error.Abort(_("parent id %i is larger than " "current id %i") % (p, r)) wantr += 1 # new root? p1 = r - 1 if len(ps) == 1 and ps[0] == -1: if needroot: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' yield '$' p1 = -1 else: needroot = True if len(ps) == 1 and ps[0] == p1: if usedots: yield "." else: run += 1 else: if run: yield '+%d' % run run = 0 if wrapnonlinear: yield '\n' prefs = [] for p in ps: if p == p1: prefs.append('') elif p in labels: prefs.append(labels[p]) else: prefs.append('%d' % (r - p)) yield '*' + '/'.join(prefs) else: if run: yield '+%d' % run run = 0 if kind == 'l': rid, name = data labels[rid] = name yield ':' + name if wraplabels: yield '\n' elif kind == 'c': yield '!' + wrapstring(data) if wrapcommands: yield '\n' elif kind == 'C': yield '!!' + data yield '\n' elif kind == 'a': if wrapannotations: yield '\n' yield '@' + wrapstring(data) elif kind == '#': yield '#' + data yield '\n' else: raise error.Abort(_("invalid event type in dag: " "('%s', '%s')") % (stringutil.escapestr(kind), stringutil.escapestr(data))) if run: yield '+%d' % run line = '' for part in gen(): if part == '\n': if line: yield line line = '' else: if len(line) + len(part) >= maxlinewidth: yield line line = '' elif addspaces and line and part != '.': line += ' ' line += part if line: yield line def dagtext(dag, addspaces=True, wraplabels=False, wrapannotations=False, wrapcommands=False, wrapnonlinear=False, usedots=False, maxlinewidth=70): '''generates lines of a textual representation for a dag event stream events should generate what parsedag() does, so: ('n', (id, [parentids])) for node creation ('l', (id, labelname)) for labels on nodes ('a', text) for annotations ('c', text) for commands ('C', text) for line commands ('!!') ('#', text) for comment lines Parent nodes must come before child nodes. Examples -------- Linear run: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0]))]) '+2' Two roots: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [-1]))]) '+1 $ +1' Fork and join: >>> dagtext([(b'n', (0, [-1])), (b'n', (1, [0])), (b'n', (2, [0])), ... (b'n', (3, [2, 1]))]) '+2 *2 */2' Fork and join with labels: >>> dagtext([(b'n', (0, [-1])), (b'l', (0, b'f')), (b'n', (1, [0])), ... (b'l', (1, b'p2')), (b'n', (2, [0])), (b'n', (3, [2, 1]))]) '+1 :f +1 :p2 *f */p2' Annotations: >>> dagtext([(b'n', (0, [-1])), (b'a', b'ann'), (b'n', (1, [0]))]) '+1 @ann +1' >>> dagtext([(b'n', (0, [-1])), ... (b'a', b'my annotation'), ... (b'n', (1, [0]))]) '+1 @"my annotation" +1' Commands: >>> dagtext([(b'n', (0, [-1])), (b'c', b'cmd'), (b'n', (1, [0]))]) '+1 !cmd +1' >>> dagtext([(b'n', (0, [-1])), ... (b'c', b'my command'), ... (b'n', (1, [0]))]) '+1 !"my command" +1' >>> dagtext([(b'n', (0, [-1])), ... (b'C', b'my command line'), ... (b'n', (1, [0]))]) '+1 !!my command line\\n+1' Comments: >>> dagtext([(b'n', (0, [-1])), (b'#', b' comment'), (b'n', (1, [0]))]) '+1 # comment\\n+1' >>> dagtext([]) '' Combining parsedag and dagtext: >>> dagtext(parsedag(b'+1 :f +1 :p2 *f */p2')) '+1 :f +1 :p2 *f */p2' ''' return "\n".join(dagtextlines(dag, addspaces, wraplabels, wrapannotations, wrapcommands, wrapnonlinear, usedots, maxlinewidth))