view mercurial/treediscovery.py @ 39872:733db72f0f54

revlog: move revision verification out of verify

File revision verification is performing low-level checks of file
storage, namely that flags are appropriate and revision data can
be resolved.

Since these checks are somewhat revlog-specific and may not
be appropriate for alternate storage backends, this commit moves
those checks from verify.py to revlog.py.

Because we're now emitting warnings/errors that apply to specific
revisions, we taught the iverifyproblem interface to expose the
problematic node and to report this node in verify output. This
was necessary to prevent unwanted test changes.

After this change, revlog.verifyintegrity() and file verify code
in verify.py both iterate over revisions and resolve their fulltext.
But they do so in separate loops. (verify.py needs to resolve
fulltexts as part of calling renamed() - at least when using revlogs.)
This should add overhead.

But on the mozilla-unified repo:

$ hg verify
before: time: real 700.640 secs (user 585.520+0.000 sys 23.480+0.000)
after:  time: real 682.380 secs (user 570.370+0.000 sys 22.240+0.000)

I'm not sure what's going on. Maybe avoiding the filelog attribute
proxies shaved off enough time to offset the losses? Maybe fulltext
resolution has less overhead than I thought?

I've left a comment indicating the potential for optimization. But
because it doesn't produce a performance regression on a large
repository, I'm not going to worry about it.

Differential Revision: https://phab.mercurial-scm.org/D4745

# discovery.py - protocol changeset discovery functions
#
# Copyright 2010 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import collections

from .i18n import _
from .node import (
    nullid,
    short,
)
from . import (
    error,
    pycompat,
)

def findcommonincoming(repo, remote, heads=None, force=False):
    """Return a tuple (common, fetch, heads) used to identify the common
    subset of nodes between repo and remote.

    "common" is a list of (at least) the heads of the common subset.
    "fetch" is a list of roots of the nodes that would be incoming, to be
      supplied to changegroupsubset.
    "heads" is either the supplied heads, or else the remote's heads.
    """

    knownnode = repo.changelog.hasnode
    search = []
    fetch = set()
    seen = set()
    seenbranch = set()
    base = set()

    if not heads:
        with remote.commandexecutor() as e:
            heads = e.callcommand('heads', {}).result()

    if repo.changelog.tip() == nullid:
        base.add(nullid)
        if heads != [nullid]:
            return [nullid], [nullid], list(heads)
        return [nullid], [], heads

    # assume we're closer to the tip than the root
    # and start by examining the heads
    repo.ui.status(_("searching for changes\n"))

    unknown = []
    for h in heads:
        if not knownnode(h):
            unknown.append(h)
        else:
            base.add(h)

    if not unknown:
        return list(base), [], list(heads)

    req = set(unknown)
    reqcnt = 0
    progress = repo.ui.makeprogress(_('searching'), unit=_('queries'))

    # search through remote branches
    # a 'branch' here is a linear segment of history, with four parts:
    # head, root, first parent, second parent
    # (a branch always has two parents (or none) by definition)
    with remote.commandexecutor() as e:
        branches = e.callcommand('branches', {'nodes': unknown}).result()

    unknown = collections.deque(branches)
    while unknown:
        r = []
        while unknown:
            n = unknown.popleft()
            if n[0] in seen:
                continue

            repo.ui.debug("examining %s:%s\n"
                          % (short(n[0]), short(n[1])))
            if n[0] == nullid: # found the end of the branch
                pass
            elif n in seenbranch:
                repo.ui.debug("branch already found\n")
                continue
            elif n[1] and knownnode(n[1]): # do we know the base?
                repo.ui.debug("found incomplete branch %s:%s\n"
                              % (short(n[0]), short(n[1])))
                search.append(n[0:2]) # schedule branch range for scanning
                seenbranch.add(n)
            else:
                if n[1] not in seen and n[1] not in fetch:
                    if knownnode(n[2]) and knownnode(n[3]):
                        repo.ui.debug("found new changeset %s\n" %
                                      short(n[1]))
                        fetch.add(n[1]) # earliest unknown
                    for p in n[2:4]:
                        if knownnode(p):
                            base.add(p) # latest known

                for p in n[2:4]:
                    if p not in req and not knownnode(p):
                        r.append(p)
                        req.add(p)
            seen.add(n[0])

        if r:
            reqcnt += 1
            progress.increment()
            repo.ui.debug("request %d: %s\n" %
                        (reqcnt, " ".join(map(short, r))))
            for p in pycompat.xrange(0, len(r), 10):
                with remote.commandexecutor() as e:
                    branches = e.callcommand('branches', {
                        'nodes': r[p:p + 10],
                    }).result()

                for b in branches:
                    repo.ui.debug("received %s:%s\n" %
                                  (short(b[0]), short(b[1])))
                    unknown.append(b)

    # do binary search on the branches we found
    while search:
        newsearch = []
        reqcnt += 1
        progress.increment()

        with remote.commandexecutor() as e:
            between = e.callcommand('between', {'pairs': search}).result()

        for n, l in zip(search, between):
            l.append(n[1])
            p = n[0]
            f = 1
            for i in l:
                repo.ui.debug("narrowing %d:%d %s\n" % (f, len(l), short(i)))
                if knownnode(i):
                    if f <= 2:
                        repo.ui.debug("found new branch changeset %s\n" %
                                          short(p))
                        fetch.add(p)
                        base.add(i)
                    else:
                        repo.ui.debug("narrowed branch search to %s:%s\n"
                                      % (short(p), short(i)))
                        newsearch.append((p, i))
                    break
                p, f = i, f * 2
            search = newsearch

    # sanity check our fetch list
    for f in fetch:
        if knownnode(f):
            raise error.RepoError(_("already have changeset ")
                                  + short(f[:4]))

    base = list(base)
    if base == [nullid]:
        if force:
            repo.ui.warn(_("warning: repository is unrelated\n"))
        else:
            raise error.Abort(_("repository is unrelated"))

    repo.ui.debug("found new changesets starting at " +
                 " ".join([short(f) for f in fetch]) + "\n")

    progress.complete()
    repo.ui.debug("%d total queries\n" % reqcnt)

    return base, list(fetch), heads