view tests/test-install.t @ 31971:73e9328e5307

obsolescence: add test case D-3 for obsolescence markers exchange

About 3 years ago, in August 2014, the logic to select what markers to select on
push was ported from the evolve extension to Mercurial core. However, for some
unclear reasons, the tests for that logic were not ported alongside.
I realised it a couple of weeks ago while working on another push related issue.
I've made a clean up pass on the tests and they are now ready to integrate the
core test suite. This series of changesets do not change any logic. I just adds
test for logic that has been around for about 10 versions of Mercurial.

They are a patch for each test case. It makes it easier to review and postpone
one with documentation issues without rejecting the wholes series.

This patch introduce case D3: missing prune target (prune not in "pushed set")

Each test case comes it in own test file. It help parallelism and does not
introduce a significant overhead from having a single unified giant test file.
Here are timing  to support this claim.

# Multiple test files version:
# run-tests.py --local -j 1 test-exchange-*.t
53.40s user 6.82s system 85% cpu 1:10.76 total
52.79s user 6.97s system 85% cpu 1:09.97 total
52.94s user 6.82s system 85% cpu 1:09.69 total

# Single test file version:
# run-tests.py --local -j 1 test-exchange-obsmarkers.t
52.97s user 6.85s system 85% cpu 1:10.10 total
52.64s user 6.79s system 85% cpu 1:09.63 total
53.70s user 7.00s system 85% cpu 1:11.17 total

hg debuginstall
  $ hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

hg debuginstall JSON
  $ hg debuginstall -Tjson | sed 's|\\\\|\\|g'
  [
   {
    "compengines": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesavail": ["bz2", "bz2truncated", "none", "zlib"*], (glob)
    "compenginesserver": [*"zlib"*], (glob)
    "defaulttemplate": "*mercurial?templates?map-cmdline.default", (glob)
    "defaulttemplateerror": null,
    "defaulttemplatenotfound": "default",
    "editor": "* -c \"import sys; sys.exit(0)\"", (glob)
    "editornotfound": false,
    "encoding": "ascii",
    "encodingerror": null,
    "extensionserror": null,
    "hgmodulepolicy": "*", (glob)
    "hgmodules": "*mercurial", (glob)
    "hgver": "*", (glob)
    "hgverextra": "*", (glob)
    "problems": 0,
    "pythonexe": "*", (glob)
    "pythonlib": "*", (glob)
    "pythonsecurity": [*], (glob)
    "pythonver": "*.*.*", (glob)
    "templatedirs": "*mercurial?templates", (glob)
    "username": "test",
    "usernameerror": null,
    "vinotfound": false
   }
  ]

hg debuginstall with no username
  $ HGUSER= hg debuginstall
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (2.*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username...
   no username supplied
   (specify a username in your configuration file)
  1 problems detected, please check your install!
  [1]

path variables are expanded (~ is the same as $TESTTMP)
  $ mkdir tools
  $ touch tools/testeditor.exe
#if execbit
  $ chmod 755 tools/testeditor.exe
#endif
  $ hg debuginstall --config ui.editor=~/tools/testeditor.exe
  checking encoding (ascii)...
  checking Python executable (*) (glob)
  checking Python version (*) (glob)
  checking Python lib (*lib*)... (glob)
  checking Python security support (*) (glob)
    TLS 1.2 not supported by Python install; network connections lack modern security (?)
    SNI not supported by Python install; may have connectivity issues with some servers (?)
  checking Mercurial version (*) (glob)
  checking Mercurial custom build (*) (glob)
  checking module policy (*) (glob)
  checking installed modules (*mercurial)... (glob)
  checking registered compression engines (*zlib*) (glob)
  checking available compression engines (*zlib*) (glob)
  checking available compression engines for wire protocol (*zlib*) (glob)
  checking templates (*mercurial?templates)... (glob)
  checking default template (*mercurial?templates?map-cmdline.default) (glob)
  checking commit editor... (* -c "import sys; sys.exit(0)") (glob)
  checking username (test)
  no problems detected

#if test-repo
  $ . "$TESTDIR/helpers-testrepo.sh"

  $ cat >> wixxml.py << EOF
  > import os, subprocess, sys
  > import xml.etree.ElementTree as ET
  > 
  > # MSYS mangles the path if it expands $TESTDIR
  > testdir = os.environ['TESTDIR']
  > ns = {'wix' : 'http://schemas.microsoft.com/wix/2006/wi'}
  > 
  > def directory(node, relpath):
  >     '''generator of files in the xml node, rooted at relpath'''
  >     dirs = node.findall('./{%(wix)s}Directory' % ns)
  > 
  >     for d in dirs:
  >         for subfile in directory(d, relpath + d.attrib['Name'] + '/'):
  >             yield subfile
  > 
  >     files = node.findall('./{%(wix)s}Component/{%(wix)s}File' % ns)
  > 
  >     for f in files:
  >         yield relpath + f.attrib['Name']
  > 
  > def hgdirectory(relpath):
  >     '''generator of tracked files, rooted at relpath'''
  >     hgdir = "%s/../mercurial" % (testdir)
  >     args = ['hg', '--cwd', hgdir, 'files', relpath]
  >     proc = subprocess.Popen(args, stdout=subprocess.PIPE,
  >                             stderr=subprocess.PIPE)
  >     output = proc.communicate()[0]
  > 
  >     slash = '/'
  >     for line in output.splitlines():
  >         if os.name == 'nt':
  >             yield line.replace(os.sep, slash)
  >         else:
  >             yield line
  > 
  > tracked = [f for f in hgdirectory(sys.argv[1])]
  > 
  > xml = ET.parse("%s/../contrib/wix/%s.wxs" % (testdir, sys.argv[1]))
  > root = xml.getroot()
  > dir = root.find('.//{%(wix)s}DirectoryRef' % ns)
  > 
  > installed = [f for f in directory(dir, '')]
  > 
  > print('Not installed:')
  > for f in sorted(set(tracked) - set(installed)):
  >     print('  %s' % f)
  > 
  > print('Not tracked:')
  > for f in sorted(set(installed) - set(tracked)):
  >     print('  %s' % f)
  > EOF

  $ python wixxml.py help
  Not installed:
    help/common.txt
    help/hg-ssh.8.txt
    help/hg.1.txt
    help/hgignore.5.txt
    help/hgrc.5.txt
  Not tracked:

  $ python wixxml.py templates
  Not installed:
  Not tracked:

#endif