dirstate-tree: Remove DirstateMap::iter_node_data_mut
In an upcoming changeset we want DirstateMap to be able to work directly
with nodes in their "on disk" representation, without always allocating
corresponding in-memory data structures. Nodes would have two possible
representations: one immutable "on disk" refering to the bytes buffer
of the contents of the .hg/dirstate file, and one mutable with HashMap
like the curren data structure.
These nodes would have copy-on-write semantics: when an immutable node
would need to be mutated, instead we allocate new mutable node for it and
its ancestors.
A mutable iterator of the entire tree would still be possible, but it would
become much more expensive since we’d need to allocate mutable nodes for
everything.
Instead, remove this iterator. It was only used to clear ambiguous mtimes
while serializing the `DirstateMap`. Instead clearing and serialization are
now two separate passes. Clearing first uses an immutable iterator to collect
the paths of nodes that need to be cleared, then accesses only those nodes
mutably.
Differential Revision: https://phab.mercurial-scm.org/D10744
# progress.py progress bars related code
#
# Copyright (C) 2010 Augie Fackler <durin42@gmail.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import errno
import threading
import time
from .i18n import _
from . import encoding
def spacejoin(*args):
return b' '.join(s for s in args if s)
def shouldprint(ui):
return not (ui.quiet or ui.plain(b'progress')) and (
ui._isatty(ui.ferr) or ui.configbool(b'progress', b'assume-tty')
)
def fmtremaining(seconds):
"""format a number of remaining seconds in human readable way
This will properly display seconds, minutes, hours, days if needed"""
if seconds < 60:
# i18n: format XX seconds as "XXs"
return _(b"%02ds") % seconds
minutes = seconds // 60
if minutes < 60:
seconds -= minutes * 60
# i18n: format X minutes and YY seconds as "XmYYs"
return _(b"%dm%02ds") % (minutes, seconds)
# we're going to ignore seconds in this case
minutes += 1
hours = minutes // 60
minutes -= hours * 60
if hours < 30:
# i18n: format X hours and YY minutes as "XhYYm"
return _(b"%dh%02dm") % (hours, minutes)
# we're going to ignore minutes in this case
hours += 1
days = hours // 24
hours -= days * 24
if days < 15:
# i18n: format X days and YY hours as "XdYYh"
return _(b"%dd%02dh") % (days, hours)
# we're going to ignore hours in this case
days += 1
weeks = days // 7
days -= weeks * 7
if weeks < 55:
# i18n: format X weeks and YY days as "XwYYd"
return _(b"%dw%02dd") % (weeks, days)
# we're going to ignore days and treat a year as 52 weeks
weeks += 1
years = weeks // 52
weeks -= years * 52
# i18n: format X years and YY weeks as "XyYYw"
return _(b"%dy%02dw") % (years, weeks)
# file_write() and file_flush() of Python 2 do not restart on EINTR if
# the file is attached to a "slow" device (e.g. a terminal) and raise
# IOError. We cannot know how many bytes would be written by file_write(),
# but a progress text is known to be short enough to be written by a
# single write() syscall, so we can just retry file_write() with the whole
# text. (issue5532)
#
# This should be a short-term workaround. We'll need to fix every occurrence
# of write() to a terminal or pipe.
def _eintrretry(func, *args):
while True:
try:
return func(*args)
except IOError as err:
if err.errno == errno.EINTR:
continue
raise
class progbar(object):
def __init__(self, ui):
self.ui = ui
self._refreshlock = threading.Lock()
self.resetstate()
def resetstate(self):
self.topics = []
self.topicstates = {}
self.starttimes = {}
self.startvals = {}
self.printed = False
self.lastprint = time.time() + float(
self.ui.config(b'progress', b'delay')
)
self.curtopic = None
self.lasttopic = None
self.indetcount = 0
self.refresh = float(self.ui.config(b'progress', b'refresh'))
self.changedelay = max(
3 * self.refresh, float(self.ui.config(b'progress', b'changedelay'))
)
self.order = self.ui.configlist(b'progress', b'format')
self.estimateinterval = self.ui.configwith(
float, b'progress', b'estimateinterval'
)
def show(self, now, topic, pos, item, unit, total):
if not shouldprint(self.ui):
return
termwidth = self.width()
self.printed = True
head = b''
needprogress = False
tail = b''
for indicator in self.order:
add = b''
if indicator == b'topic':
add = topic
elif indicator == b'number':
if total:
add = b'%*d/%d' % (len(str(total)), pos, total)
else:
add = b'%d' % pos
elif indicator.startswith(b'item') and item:
slice = b'end'
if b'-' in indicator:
wid = int(indicator.split(b'-')[1])
elif b'+' in indicator:
slice = b'beginning'
wid = int(indicator.split(b'+')[1])
else:
wid = 20
if slice == b'end':
add = encoding.trim(item, wid, leftside=True)
else:
add = encoding.trim(item, wid)
add += (wid - encoding.colwidth(add)) * b' '
elif indicator == b'bar':
add = b''
needprogress = True
elif indicator == b'unit' and unit:
add = unit
elif indicator == b'estimate':
add = self.estimate(topic, pos, total, now)
elif indicator == b'speed':
add = self.speed(topic, pos, unit, now)
if not needprogress:
head = spacejoin(head, add)
else:
tail = spacejoin(tail, add)
if needprogress:
used = 0
if head:
used += encoding.colwidth(head) + 1
if tail:
used += encoding.colwidth(tail) + 1
progwidth = termwidth - used - 3
if total and pos <= total:
amt = pos * progwidth // total
bar = b'=' * (amt - 1)
if amt > 0:
bar += b'>'
bar += b' ' * (progwidth - amt)
else:
progwidth -= 3
self.indetcount += 1
# mod the count by twice the width so we can make the
# cursor bounce between the right and left sides
amt = self.indetcount % (2 * progwidth)
amt -= progwidth
bar = (
b' ' * int(progwidth - abs(amt))
+ b'<=>'
+ b' ' * int(abs(amt))
)
prog = b''.join((b'[', bar, b']'))
out = spacejoin(head, prog, tail)
else:
out = spacejoin(head, tail)
self._writeerr(b'\r' + encoding.trim(out, termwidth))
self.lasttopic = topic
self._flusherr()
def clear(self):
if not self.printed or not self.lastprint or not shouldprint(self.ui):
return
self._writeerr(b'\r%s\r' % (b' ' * self.width()))
self._flusherr()
if self.printed:
# force immediate re-paint of progress bar
self.lastprint = 0
def complete(self):
if not shouldprint(self.ui):
return
if self.ui.configbool(b'progress', b'clear-complete'):
self.clear()
else:
self._writeerr(b'\n')
self._flusherr()
def _flusherr(self):
_eintrretry(self.ui.ferr.flush)
def _writeerr(self, msg):
_eintrretry(self.ui.ferr.write, msg)
def width(self):
tw = self.ui.termwidth()
return min(int(self.ui.config(b'progress', b'width', default=tw)), tw)
def estimate(self, topic, pos, total, now):
if total is None:
return b''
initialpos = self.startvals[topic]
target = total - initialpos
delta = pos - initialpos
if delta > 0:
elapsed = now - self.starttimes[topic]
seconds = (elapsed * (target - delta)) // delta + 1
return fmtremaining(seconds)
return b''
def speed(self, topic, pos, unit, now):
initialpos = self.startvals[topic]
delta = pos - initialpos
elapsed = now - self.starttimes[topic]
if elapsed > 0:
return _(b'%d %s/sec') % (delta / elapsed, unit)
return b''
def _oktoprint(self, now):
'''Check if conditions are met to print - e.g. changedelay elapsed'''
if (
self.lasttopic is None # first time we printed
# not a topic change
or self.curtopic == self.lasttopic
# it's been long enough we should print anyway
or now - self.lastprint >= self.changedelay
):
return True
else:
return False
def _calibrateestimate(self, topic, now, pos):
"""Adjust starttimes and startvals for topic so ETA works better
If progress is non-linear (ex. get much slower in the last minute),
it's more friendly to only use a recent time span for ETA and speed
calculation.
[======================================> ]
^^^^^^^
estimateinterval, only use this for estimation
"""
interval = self.estimateinterval
if interval <= 0:
return
elapsed = now - self.starttimes[topic]
if elapsed > interval:
delta = pos - self.startvals[topic]
newdelta = delta * interval / elapsed
# If a stall happens temporarily, ETA could change dramatically
# frequently. This is to avoid such dramatical change and make ETA
# smoother.
if newdelta < 0.1:
return
self.startvals[topic] = pos - newdelta
self.starttimes[topic] = now - interval
def progress(self, topic, pos, item=b'', unit=b'', total=None):
if pos is None:
self.closetopic(topic)
return
now = time.time()
with self._refreshlock:
if topic not in self.topics:
self.starttimes[topic] = now
self.startvals[topic] = pos
self.topics.append(topic)
self.topicstates[topic] = pos, item, unit, total
self.curtopic = topic
self._calibrateestimate(topic, now, pos)
if now - self.lastprint >= self.refresh and self.topics:
if self._oktoprint(now):
self.lastprint = now
self.show(now, topic, *self.topicstates[topic])
def closetopic(self, topic):
with self._refreshlock:
self.starttimes.pop(topic, None)
self.startvals.pop(topic, None)
self.topicstates.pop(topic, None)
# reset the progress bar if this is the outermost topic
if self.topics and self.topics[0] == topic and self.printed:
self.complete()
self.resetstate()
# truncate the list of topics assuming all topics within
# this one are also closed
if topic in self.topics:
self.topics = self.topics[: self.topics.index(topic)]
# reset the last topic to the one we just unwound to,
# so that higher-level topics will be stickier than
# lower-level topics
if self.topics:
self.lasttopic = self.topics[-1]
else:
self.lasttopic = None