py3: use bytes instead of str in isinstance
Internally we use bytes everywhere, and str on Python 3 is unicodes, so we need
to make sure we are doing the right check.
Differential Revision: https://phab.mercurial-scm.org/D2458
# Copyright 21 May 2005 - (c) 2005 Jake Edge <jake@edge2.net>
# Copyright 2005-2007 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import contextlib
import struct
import sys
from .i18n import _
from . import (
encoding,
error,
hook,
pycompat,
util,
wireproto,
wireprototypes,
)
stringio = util.stringio
urlerr = util.urlerr
urlreq = util.urlreq
HTTP_OK = 200
HGTYPE = 'application/mercurial-0.1'
HGTYPE2 = 'application/mercurial-0.2'
HGERRTYPE = 'application/hg-error'
# Names of the SSH protocol implementations.
SSHV1 = 'ssh-v1'
# This is advertised over the wire. Incremental the counter at the end
# to reflect BC breakages.
SSHV2 = 'exp-ssh-v2-0001'
def decodevaluefromheaders(req, headerprefix):
"""Decode a long value from multiple HTTP request headers.
Returns the value as a bytes, not a str.
"""
chunks = []
i = 1
prefix = headerprefix.upper().replace(r'-', r'_')
while True:
v = req.env.get(r'HTTP_%s_%d' % (prefix, i))
if v is None:
break
chunks.append(pycompat.bytesurl(v))
i += 1
return ''.join(chunks)
class httpv1protocolhandler(wireprototypes.baseprotocolhandler):
def __init__(self, req, ui):
self._req = req
self._ui = ui
@property
def name(self):
return 'http-v1'
def getargs(self, args):
knownargs = self._args()
data = {}
keys = args.split()
for k in keys:
if k == '*':
star = {}
for key in knownargs.keys():
if key != 'cmd' and key not in keys:
star[key] = knownargs[key][0]
data['*'] = star
else:
data[k] = knownargs[k][0]
return [data[k] for k in keys]
def _args(self):
args = util.rapply(pycompat.bytesurl, self._req.form.copy())
postlen = int(self._req.env.get(r'HTTP_X_HGARGS_POST', 0))
if postlen:
args.update(urlreq.parseqs(
self._req.read(postlen), keep_blank_values=True))
return args
argvalue = decodevaluefromheaders(self._req, r'X-HgArg')
args.update(urlreq.parseqs(argvalue, keep_blank_values=True))
return args
def forwardpayload(self, fp):
if r'HTTP_CONTENT_LENGTH' in self._req.env:
length = int(self._req.env[r'HTTP_CONTENT_LENGTH'])
else:
length = int(self._req.env[r'CONTENT_LENGTH'])
# If httppostargs is used, we need to read Content-Length
# minus the amount that was consumed by args.
length -= int(self._req.env.get(r'HTTP_X_HGARGS_POST', 0))
for s in util.filechunkiter(self._req, limit=length):
fp.write(s)
@contextlib.contextmanager
def mayberedirectstdio(self):
oldout = self._ui.fout
olderr = self._ui.ferr
out = util.stringio()
try:
self._ui.fout = out
self._ui.ferr = out
yield out
finally:
self._ui.fout = oldout
self._ui.ferr = olderr
def client(self):
return 'remote:%s:%s:%s' % (
self._req.env.get('wsgi.url_scheme') or 'http',
urlreq.quote(self._req.env.get('REMOTE_HOST', '')),
urlreq.quote(self._req.env.get('REMOTE_USER', '')))
# This method exists mostly so that extensions like remotefilelog can
# disable a kludgey legacy method only over http. As of early 2018,
# there are no other known users, so with any luck we can discard this
# hook if remotefilelog becomes a first-party extension.
def iscmd(cmd):
return cmd in wireproto.commands
def parsehttprequest(repo, req, query):
"""Parse the HTTP request for a wire protocol request.
If the current request appears to be a wire protocol request, this
function returns a dict with details about that request, including
an ``abstractprotocolserver`` instance suitable for handling the
request. Otherwise, ``None`` is returned.
``req`` is a ``wsgirequest`` instance.
"""
# HTTP version 1 wire protocol requests are denoted by a "cmd" query
# string parameter. If it isn't present, this isn't a wire protocol
# request.
if r'cmd' not in req.form:
return None
cmd = pycompat.sysbytes(req.form[r'cmd'][0])
# The "cmd" request parameter is used by both the wire protocol and hgweb.
# While not all wire protocol commands are available for all transports,
# if we see a "cmd" value that resembles a known wire protocol command, we
# route it to a protocol handler. This is better than routing possible
# wire protocol requests to hgweb because it prevents hgweb from using
# known wire protocol commands and it is less confusing for machine
# clients.
if not iscmd(cmd):
return None
proto = httpv1protocolhandler(req, repo.ui)
return {
'cmd': cmd,
'proto': proto,
'dispatch': lambda: _callhttp(repo, req, proto, cmd),
'handleerror': lambda ex: _handlehttperror(ex, req, cmd),
}
def _httpresponsetype(ui, req, prefer_uncompressed):
"""Determine the appropriate response type and compression settings.
Returns a tuple of (mediatype, compengine, engineopts).
"""
# Determine the response media type and compression engine based
# on the request parameters.
protocaps = decodevaluefromheaders(req, r'X-HgProto').split(' ')
if '0.2' in protocaps:
# All clients are expected to support uncompressed data.
if prefer_uncompressed:
return HGTYPE2, util._noopengine(), {}
# Default as defined by wire protocol spec.
compformats = ['zlib', 'none']
for cap in protocaps:
if cap.startswith('comp='):
compformats = cap[5:].split(',')
break
# Now find an agreed upon compression format.
for engine in wireproto.supportedcompengines(ui, util.SERVERROLE):
if engine.wireprotosupport().name in compformats:
opts = {}
level = ui.configint('server', '%slevel' % engine.name())
if level is not None:
opts['level'] = level
return HGTYPE2, engine, opts
# No mutually supported compression format. Fall back to the
# legacy protocol.
# Don't allow untrusted settings because disabling compression or
# setting a very high compression level could lead to flooding
# the server's network or CPU.
opts = {'level': ui.configint('server', 'zliblevel')}
return HGTYPE, util.compengines['zlib'], opts
def _callhttp(repo, req, proto, cmd):
def genversion2(gen, engine, engineopts):
# application/mercurial-0.2 always sends a payload header
# identifying the compression engine.
name = engine.wireprotosupport().name
assert 0 < len(name) < 256
yield struct.pack('B', len(name))
yield name
for chunk in gen:
yield chunk
rsp = wireproto.dispatch(repo, proto, cmd)
if not wireproto.commands.commandavailable(cmd, proto):
req.respond(HTTP_OK, HGERRTYPE,
body=_('requested wire protocol command is not available '
'over HTTP'))
return []
if isinstance(rsp, bytes):
req.respond(HTTP_OK, HGTYPE, body=rsp)
return []
elif isinstance(rsp, wireprototypes.bytesresponse):
req.respond(HTTP_OK, HGTYPE, body=rsp.data)
return []
elif isinstance(rsp, wireprototypes.streamreslegacy):
gen = rsp.gen
req.respond(HTTP_OK, HGTYPE)
return gen
elif isinstance(rsp, wireprototypes.streamres):
gen = rsp.gen
# This code for compression should not be streamres specific. It
# is here because we only compress streamres at the moment.
mediatype, engine, engineopts = _httpresponsetype(
repo.ui, req, rsp.prefer_uncompressed)
gen = engine.compressstream(gen, engineopts)
if mediatype == HGTYPE2:
gen = genversion2(gen, engine, engineopts)
req.respond(HTTP_OK, mediatype)
return gen
elif isinstance(rsp, wireprototypes.pushres):
rsp = '%d\n%s' % (rsp.res, rsp.output)
req.respond(HTTP_OK, HGTYPE, body=rsp)
return []
elif isinstance(rsp, wireprototypes.pusherr):
# This is the httplib workaround documented in _handlehttperror().
req.drain()
rsp = '0\n%s\n' % rsp.res
req.respond(HTTP_OK, HGTYPE, body=rsp)
return []
elif isinstance(rsp, wireprototypes.ooberror):
rsp = rsp.message
req.respond(HTTP_OK, HGERRTYPE, body=rsp)
return []
raise error.ProgrammingError('hgweb.protocol internal failure', rsp)
def _handlehttperror(e, req, cmd):
"""Called when an ErrorResponse is raised during HTTP request processing."""
# Clients using Python's httplib are stateful: the HTTP client
# won't process an HTTP response until all request data is
# sent to the server. The intent of this code is to ensure
# we always read HTTP request data from the client, thus
# ensuring httplib transitions to a state that allows it to read
# the HTTP response. In other words, it helps prevent deadlocks
# on clients using httplib.
if (req.env[r'REQUEST_METHOD'] == r'POST' and
# But not if Expect: 100-continue is being used.
(req.env.get('HTTP_EXPECT',
'').lower() != '100-continue') or
# Or the non-httplib HTTP library is being advertised by
# the client.
req.env.get('X-HgHttp2', '')):
req.drain()
else:
req.headers.append((r'Connection', r'Close'))
# TODO This response body assumes the failed command was
# "unbundle." That assumption is not always valid.
req.respond(e, HGTYPE, body='0\n%s\n' % pycompat.bytestr(e))
return ''
def _sshv1respondbytes(fout, value):
"""Send a bytes response for protocol version 1."""
fout.write('%d\n' % len(value))
fout.write(value)
fout.flush()
def _sshv1respondstream(fout, source):
write = fout.write
for chunk in source.gen:
write(chunk)
fout.flush()
def _sshv1respondooberror(fout, ferr, rsp):
ferr.write(b'%s\n-\n' % rsp)
ferr.flush()
fout.write(b'\n')
fout.flush()
class sshv1protocolhandler(wireprototypes.baseprotocolhandler):
"""Handler for requests services via version 1 of SSH protocol."""
def __init__(self, ui, fin, fout):
self._ui = ui
self._fin = fin
self._fout = fout
@property
def name(self):
return SSHV1
def getargs(self, args):
data = {}
keys = args.split()
for n in xrange(len(keys)):
argline = self._fin.readline()[:-1]
arg, l = argline.split()
if arg not in keys:
raise error.Abort(_("unexpected parameter %r") % arg)
if arg == '*':
star = {}
for k in xrange(int(l)):
argline = self._fin.readline()[:-1]
arg, l = argline.split()
val = self._fin.read(int(l))
star[arg] = val
data['*'] = star
else:
val = self._fin.read(int(l))
data[arg] = val
return [data[k] for k in keys]
def forwardpayload(self, fpout):
# We initially send an empty response. This tells the client it is
# OK to start sending data. If a client sees any other response, it
# interprets it as an error.
_sshv1respondbytes(self._fout, b'')
# The file is in the form:
#
# <chunk size>\n<chunk>
# ...
# 0\n
count = int(self._fin.readline())
while count:
fpout.write(self._fin.read(count))
count = int(self._fin.readline())
@contextlib.contextmanager
def mayberedirectstdio(self):
yield None
def client(self):
client = encoding.environ.get('SSH_CLIENT', '').split(' ', 1)[0]
return 'remote:ssh:' + client
class sshv2protocolhandler(sshv1protocolhandler):
"""Protocol handler for version 2 of the SSH protocol."""
def _runsshserver(ui, repo, fin, fout):
# This function operates like a state machine of sorts. The following
# states are defined:
#
# protov1-serving
# Server is in protocol version 1 serving mode. Commands arrive on
# new lines. These commands are processed in this state, one command
# after the other.
#
# protov2-serving
# Server is in protocol version 2 serving mode.
#
# upgrade-initial
# The server is going to process an upgrade request.
#
# upgrade-v2-filter-legacy-handshake
# The protocol is being upgraded to version 2. The server is expecting
# the legacy handshake from version 1.
#
# upgrade-v2-finish
# The upgrade to version 2 of the protocol is imminent.
#
# shutdown
# The server is shutting down, possibly in reaction to a client event.
#
# And here are their transitions:
#
# protov1-serving -> shutdown
# When server receives an empty request or encounters another
# error.
#
# protov1-serving -> upgrade-initial
# An upgrade request line was seen.
#
# upgrade-initial -> upgrade-v2-filter-legacy-handshake
# Upgrade to version 2 in progress. Server is expecting to
# process a legacy handshake.
#
# upgrade-v2-filter-legacy-handshake -> shutdown
# Client did not fulfill upgrade handshake requirements.
#
# upgrade-v2-filter-legacy-handshake -> upgrade-v2-finish
# Client fulfilled version 2 upgrade requirements. Finishing that
# upgrade.
#
# upgrade-v2-finish -> protov2-serving
# Protocol upgrade to version 2 complete. Server can now speak protocol
# version 2.
#
# protov2-serving -> protov1-serving
# Ths happens by default since protocol version 2 is the same as
# version 1 except for the handshake.
state = 'protov1-serving'
proto = sshv1protocolhandler(ui, fin, fout)
protoswitched = False
while True:
if state == 'protov1-serving':
# Commands are issued on new lines.
request = fin.readline()[:-1]
# Empty lines signal to terminate the connection.
if not request:
state = 'shutdown'
continue
# It looks like a protocol upgrade request. Transition state to
# handle it.
if request.startswith(b'upgrade '):
if protoswitched:
_sshv1respondooberror(fout, ui.ferr,
b'cannot upgrade protocols multiple '
b'times')
state = 'shutdown'
continue
state = 'upgrade-initial'
continue
available = wireproto.commands.commandavailable(request, proto)
# This command isn't available. Send an empty response and go
# back to waiting for a new command.
if not available:
_sshv1respondbytes(fout, b'')
continue
rsp = wireproto.dispatch(repo, proto, request)
if isinstance(rsp, bytes):
_sshv1respondbytes(fout, rsp)
elif isinstance(rsp, wireprototypes.bytesresponse):
_sshv1respondbytes(fout, rsp.data)
elif isinstance(rsp, wireprototypes.streamres):
_sshv1respondstream(fout, rsp)
elif isinstance(rsp, wireprototypes.streamreslegacy):
_sshv1respondstream(fout, rsp)
elif isinstance(rsp, wireprototypes.pushres):
_sshv1respondbytes(fout, b'')
_sshv1respondbytes(fout, b'%d' % rsp.res)
elif isinstance(rsp, wireprototypes.pusherr):
_sshv1respondbytes(fout, rsp.res)
elif isinstance(rsp, wireprototypes.ooberror):
_sshv1respondooberror(fout, ui.ferr, rsp.message)
else:
raise error.ProgrammingError('unhandled response type from '
'wire protocol command: %s' % rsp)
# For now, protocol version 2 serving just goes back to version 1.
elif state == 'protov2-serving':
state = 'protov1-serving'
continue
elif state == 'upgrade-initial':
# We should never transition into this state if we've switched
# protocols.
assert not protoswitched
assert proto.name == SSHV1
# Expected: upgrade <token> <capabilities>
# If we get something else, the request is malformed. It could be
# from a future client that has altered the upgrade line content.
# We treat this as an unknown command.
try:
token, caps = request.split(b' ')[1:]
except ValueError:
_sshv1respondbytes(fout, b'')
state = 'protov1-serving'
continue
# Send empty response if we don't support upgrading protocols.
if not ui.configbool('experimental', 'sshserver.support-v2'):
_sshv1respondbytes(fout, b'')
state = 'protov1-serving'
continue
try:
caps = urlreq.parseqs(caps)
except ValueError:
_sshv1respondbytes(fout, b'')
state = 'protov1-serving'
continue
# We don't see an upgrade request to protocol version 2. Ignore
# the upgrade request.
wantedprotos = caps.get(b'proto', [b''])[0]
if SSHV2 not in wantedprotos:
_sshv1respondbytes(fout, b'')
state = 'protov1-serving'
continue
# It looks like we can honor this upgrade request to protocol 2.
# Filter the rest of the handshake protocol request lines.
state = 'upgrade-v2-filter-legacy-handshake'
continue
elif state == 'upgrade-v2-filter-legacy-handshake':
# Client should have sent legacy handshake after an ``upgrade``
# request. Expected lines:
#
# hello
# between
# pairs 81
# 0000...-0000...
ok = True
for line in (b'hello', b'between', b'pairs 81'):
request = fin.readline()[:-1]
if request != line:
_sshv1respondooberror(fout, ui.ferr,
b'malformed handshake protocol: '
b'missing %s' % line)
ok = False
state = 'shutdown'
break
if not ok:
continue
request = fin.read(81)
if request != b'%s-%s' % (b'0' * 40, b'0' * 40):
_sshv1respondooberror(fout, ui.ferr,
b'malformed handshake protocol: '
b'missing between argument value')
state = 'shutdown'
continue
state = 'upgrade-v2-finish'
continue
elif state == 'upgrade-v2-finish':
# Send the upgrade response.
fout.write(b'upgraded %s %s\n' % (token, SSHV2))
servercaps = wireproto.capabilities(repo, proto)
rsp = b'capabilities: %s' % servercaps.data
fout.write(b'%d\n%s\n' % (len(rsp), rsp))
fout.flush()
proto = sshv2protocolhandler(ui, fin, fout)
protoswitched = True
state = 'protov2-serving'
continue
elif state == 'shutdown':
break
else:
raise error.ProgrammingError('unhandled ssh server state: %s' %
state)
class sshserver(object):
def __init__(self, ui, repo):
self._ui = ui
self._repo = repo
self._fin = ui.fin
self._fout = ui.fout
hook.redirect(True)
ui.fout = repo.ui.fout = ui.ferr
# Prevent insertion/deletion of CRs
util.setbinary(self._fin)
util.setbinary(self._fout)
def serve_forever(self):
_runsshserver(self._ui, self._repo, self._fin, self._fout)
sys.exit(0)