Mercurial > hg
view tests/test-commit-interactive-curses.t @ 48584:74973a6d4e67
filemerge: always define a "base" label
It simplifies the code and improves the conflict markers to always
have the "base" label defined.
Differential Revision: https://phab.mercurial-scm.org/D12016
author | Martin von Zweigbergk <martinvonz@google.com> |
---|---|
date | Thu, 20 Jan 2022 14:13:12 -0800 |
parents | e5e6282fa66a |
children |
line wrap: on
line source
#require curses Set up a repo $ cp $HGRCPATH $HGRCPATH.pretest $ cat <<EOF >> $HGRCPATH > [ui] > interactive = true > interface = curses > [experimental] > crecordtest = testModeCommands > EOF Record with noeol at eof (issue5268) $ hg init noeol $ cd noeol $ printf '0' > a $ printf '0\n' > b $ hg ci -Aqm initial $ printf '1\n0' > a $ printf '1\n0\n' > b $ cat <<EOF >testModeCommands > c > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "add hunks" -d "0 0" $ cd .. Normal repo $ hg init a $ cd a Committing some changes but stopping on the way $ echo "a" > a $ hg add a $ cat <<EOF >testModeCommands > x > c > EOF $ hg commit -i -m "a" -d "0 0" no changes to record [1] $ hg tip changeset: -1:000000000000 tag: tip user: date: Thu Jan 01 00:00:00 1970 +0000 Committing some changes $ cat <<EOF >testModeCommands > c > EOF $ hg commit -i -m "a" -d "0 0" $ hg tip changeset: 0:cb9a9f314b8b tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: a Check that commit -i works with no changes $ hg commit -i no changes to record [1] Committing only one file $ echo "a" >> a >>> open('b', 'wb').write(b"1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n") and None $ hg add b $ cat <<EOF >testModeCommands > x > KEY_DOWN > c > EOF $ hg commit -i -m "one file" -d "0 0" $ hg tip changeset: 1:fb2705a663ea tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: one file $ hg cat -r tip a a $ cat a a a Committing only one hunk while aborting edition of hunk - Untoggle all the hunks, go down to the second file - unfold it - go down to second hunk (1 for the first hunk, 1 for the first hunkline, 1 for the second hunk, 1 for the second hunklike) - toggle the second hunk - toggle all lines twice (to check that it does nothing) - edit the hunk and quit the editor immediately with non-zero status - commit $ printf "printf 'editor ran\n'; exit 1" > editor.sh $ echo "x" > c $ cat b >> c $ echo "y" >> c $ mv c b $ cat <<EOF >testModeCommands > A > KEY_DOWN > f > KEY_DOWN > KEY_DOWN > KEY_DOWN > KEY_DOWN > x > a > a > e > c > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "one hunk" -d "0 0" editor ran $ rm editor.sh $ hg tip changeset: 2:7d10dfe755a8 tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: one hunk $ hg cat -r tip b 1 2 3 4 5 6 7 8 9 10 y $ cat b x 1 2 3 4 5 6 7 8 9 10 y $ hg commit -m "other hunks" $ hg tip changeset: 3:a6735021574d tag: tip user: test date: Thu Jan 01 00:00:00 1970 +0000 summary: other hunks $ hg cat -r tip b x 1 2 3 4 5 6 7 8 9 10 y Newly added files can be selected with the curses interface $ hg update -C . 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "hello" > x $ hg add x $ cat <<EOF >testModeCommands > x > x > c > EOF $ hg st A x ? testModeCommands $ hg commit -i -m "newly added file" -d "0 0" $ hg st ? testModeCommands Test toggling all selections works - Change one line - Add an extra line at the end - Unselect all - Select the extra line at the end - Toggle all selections (so the extra line at the is unselected and the modified line is selected) - Commit $ echo "hello world" > x $ echo "goodbye world" >> x $ hg diff diff -r 2b0e9be4d336 x --- a/x Thu Jan 01 00:00:00 1970 +0000 +++ b/x Thu Jan 01 00:00:00 1970 +0000 @@ -1,1 +1,2 @@ -hello +hello world +goodbye world $ cat <<EOF >testModeCommands > f > j > x > j > j > j > x > a > c > EOF $ hg commit -i --amend -m "newly added file" -d "0 0" x saved backup bundle to $TESTTMP/a/.hg/strip-backup/2b0e9be4d336-3cf0bc8c-amend.hg $ hg rev x --no-backup $ hg diff -c . diff -r a6735021574d -r c1d239d165ae x --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/x Thu Jan 01 00:00:00 1970 +0000 @@ -0,0 +1,1 @@ +hello world Make file empty $ printf "" > x $ cat <<EOF >testModeCommands > c > EOF $ hg ci -i -m emptify -d "0 0" $ hg update -C '.^' -q Editing a hunk puts you back on that hunk when done editing (issue5041) To do that, we change two lines in a file, pretend to edit the second line, exit, toggle the line selected at the end of the edit and commit. The first line should be recorded if we were put on the second line at the end of the edit. $ hg update -C . 0 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "foo" > x $ echo "hello world" >> x $ echo "bar" >> x $ cat <<EOF >testModeCommands > f > KEY_DOWN > KEY_DOWN > KEY_DOWN > KEY_DOWN > e > x > c > EOF $ printf "printf 'editor ran\n'; exit 0" > editor.sh $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "edit hunk" -d "0 0" -q editor ran $ hg cat -r . x foo hello world Testing the review option. The entire final filtered patch should show up in the editor and be editable. We will unselect the second file and the first hunk of the third file. During review, we will decide that "lower" sounds better than "bottom", and the final commit should reflect this edition. $ hg update -C . 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ echo "top" > c $ cat x >> c $ echo "bottom" >> c $ mv c x $ echo "third a" >> a $ echo "we will unselect this" >> b $ cat > editor.sh <<EOF > cat "\$1" > cat "\$1" | sed s/bottom/lower/ > tmp > mv tmp "\$1" > EOF $ cat > testModeCommands <<EOF > KEY_DOWN > x > KEY_DOWN > f > KEY_DOWN > x > R > EOF $ HGEDITOR="\"sh\" \"`pwd`/editor.sh\"" hg commit -i -m "review hunks" -d "0 0" # To remove '-' lines, make them ' ' lines (context). # To remove '+' lines, delete them. # Lines starting with # will be removed from the patch. # # If the patch applies cleanly, the edited patch will immediately # be finalised. If it does not apply cleanly, rejects files will be # generated. You can use those when you try again. diff --git a/a b/a --- a/a +++ b/a @@ -1,2 +1,3 @@ a a +third a diff --git a/x b/x --- a/x +++ b/x @@ -1,2 +1,3 @@ foo hello world +bottom $ hg cat -r . a a a third a $ hg cat -r . b x 1 2 3 4 5 6 7 8 9 10 y $ hg cat -r . x foo hello world lower Test range select: unselect 3, 5, and 6, reselect 5, then go back up to 2 and press 'X', unselecting (because 2 is currently selected) 5 (because it's the start of the range) and 4, leaving 3 unselected. $ hg init $TESTTMP/range_select $ cd $TESTTMP/range_select >>> open('range_select', 'wb').write(b"1\n2\n3\n4\n5\n6\n7\n8\n9\n10\n") and None $ hg add range_select $ cat <<EOF >testModeCommands > KEY_RIGHT > KEY_RIGHT > KEY_DOWN > KEY_DOWN > KEY_ENTER > KEY_DOWN > KEY_ENTER > x > KEY_UP > x > KEY_UP > KEY_UP > KEY_UP > X > c > EOF $ hg commit -i -m "range_select" -d "0 0" $ hg cat -r tip range_select 1 7 8 9 10 $ cat range_select 1 2 3 4 5 6 7 8 9 10 Check ui.interface logic for the chunkselector The default interface is text $ cp $HGRCPATH.pretest $HGRCPATH $ chunkselectorinterface() { > "$PYTHON" <<EOF > from mercurial import hg, pycompat, ui;\ > repo = hg.repository(ui.ui.load(), b".");\ > print(pycompat.sysstr(repo.ui.interface(b"chunkselector"))) > EOF > } $ chunkselectorinterface text If only the default is set, we'll use that for the feature, too $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > EOF $ chunkselectorinterface curses If TERM=dumb, we use text, even if the config says curses $ chunkselectorinterface curses $ TERM=dumb chunkselectorinterface text (Something is keeping TERM=dumb in the environment unless I do this, it's not scoped to just that previous command like in many shells) $ TERM=xterm chunkselectorinterface curses It is possible to override the default interface with a feature specific interface $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = text > interface.chunkselector = curses > EOF $ chunkselectorinterface curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > interface.chunkselector = text > EOF $ chunkselectorinterface text If a bad interface name is given, we use the default value (with a nice error message to suggest that the configuration needs to be fixed) $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > EOF $ chunkselectorinterface invalid value for ui.interface: blah (using text) text $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = curses > interface.chunkselector = blah > EOF $ chunkselectorinterface invalid value for ui.interface.chunkselector: blah (using curses) curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > interface.chunkselector = curses > EOF $ chunkselectorinterface invalid value for ui.interface: blah curses $ cp $HGRCPATH.pretest $HGRCPATH $ cat <<EOF >> $HGRCPATH > [ui] > interface = blah > interface.chunkselector = blah > EOF $ chunkselectorinterface invalid value for ui.interface: blah invalid value for ui.interface.chunkselector: blah (using text) text