Mercurial > hg
view tests/test-update-branches.t @ 25122:755d23a49170
match: resolve filesets in subrepos for commands given the '-S' argument
This will work for any command that creates its matcher via scmutil.match(), but
only the files command is tested here (both workingctx and basectx based tests).
The previous behavior was to completely ignore the files in the subrepo, even
though -S was given.
My first attempt was to teach context.walk() to optionally recurse, but once
that was in place and the complete file list was built up, the predicate test
would fail with 'path in nested repo' when a file in a subrepo was accessed
through the parent context.
There are two slightly surprising behaviors with this functionality. First, any
path provided inside the fileset isn't narrowed when it is passed to the
subrepo. I dont see any clean way to do that in the matcher. Fortunately, the
'subrepo()' fileset is the only one to take a path.
The second surprise is that status predicates are resolved against the subrepo,
not the parent like 'hg status -S' is. I don't see any way to fix that either,
given the path auditor error mentioned above.
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Sat, 16 May 2015 00:36:35 -0400 |
parents | 0142b59f5743 |
children | a271925699d6 |
line wrap: on
line source
# Construct the following history tree: # # @ 5:e1bb631146ca b1 # | # o 4:a4fdb3b883c4 0:b608b9236435 b1 # | # | o 3:4b57d2520816 1:44592833ba9f # | | # | | o 2:063f31070f65 # | |/ # | o 1:44592833ba9f # |/ # o 0:b608b9236435 $ mkdir b1 $ cd b1 $ hg init $ echo foo > foo $ echo zero > a $ hg init sub $ echo suba > sub/suba $ hg --cwd sub ci -Am addsuba adding suba $ echo 'sub = sub' > .hgsub $ hg ci -qAm0 $ echo one > a ; hg ci -m1 $ echo two > a ; hg ci -m2 $ hg up -q 1 $ echo three > a ; hg ci -qm3 $ hg up -q 0 $ hg branch -q b1 $ echo four > a ; hg ci -qm4 $ echo five > a ; hg ci -qm5 Initial repo state: $ hg log -G --template '{rev}:{node|short} {parents} {branches}\n' @ 5:ff252e8273df b1 | o 4:d047485b3896 0:60829823a42a b1 | | o 3:6efa171f091b 1:0786582aa4b1 | | | | o 2:bd10386d478c | |/ | o 1:0786582aa4b1 |/ o 0:60829823a42a Make sure update doesn't assume b1 is a repository if invoked from outside: $ cd .. $ hg update b1 abort: no repository found in '$TESTTMP' (.hg not found)! [255] $ cd b1 Test helper functions: $ revtest () { > msg=$1 > dirtyflag=$2 # 'clean', 'dirty' or 'dirtysub' > startrev=$3 > targetrev=$4 > opt=$5 > hg up -qC $startrev > test $dirtyflag = dirty && echo dirty > foo > test $dirtyflag = dirtysub && echo dirty > sub/suba > hg up $opt $targetrev > hg parent --template 'parent={rev}\n' > hg stat -S > } $ norevtest () { > msg=$1 > dirtyflag=$2 # 'clean', 'dirty' or 'dirtysub' > startrev=$3 > opt=$4 > hg up -qC $startrev > test $dirtyflag = dirty && echo dirty > foo > test $dirtyflag = dirtysub && echo dirty > sub/suba > hg up $opt > hg parent --template 'parent={rev}\n' > hg stat -S > } Test cases are documented in a table in the update function of merge.py. Cases are run as shown in that table, row by row. $ norevtest 'none clean linear' clean 4 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=5 $ norevtest 'none clean same' clean 2 abort: not a linear update (merge or update --check to force update) parent=2 $ revtest 'none clean linear' clean 1 2 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=2 $ revtest 'none clean same' clean 2 3 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=3 $ revtest 'none clean cross' clean 3 4 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=4 $ revtest 'none dirty linear' dirty 1 2 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=2 M foo $ revtest 'none dirtysub linear' dirtysub 1 2 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=2 M sub/suba $ revtest 'none dirty same' dirty 2 3 abort: uncommitted changes (commit or update --clean to discard changes) parent=2 M foo $ revtest 'none dirtysub same' dirtysub 2 3 abort: uncommitted changes (commit or update --clean to discard changes) parent=2 M sub/suba $ revtest 'none dirty cross' dirty 3 4 abort: uncommitted changes (commit or update --clean to discard changes) parent=3 M foo $ norevtest 'none dirty cross' dirty 2 abort: uncommitted changes (commit and merge, or update --clean to discard changes) parent=2 M foo $ revtest 'none dirtysub cross' dirtysub 3 4 abort: uncommitted changes (commit or update --clean to discard changes) parent=3 M sub/suba $ revtest '-C dirty linear' dirty 1 2 -C 2 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=2 $ revtest '-c dirty linear' dirty 1 2 -c abort: uncommitted changes parent=1 M foo $ revtest '-c dirtysub linear' dirtysub 1 2 -c abort: uncommitted changes in subrepository 'sub' parent=1 M sub/suba $ norevtest '-c clean same' clean 2 -c 1 files updated, 0 files merged, 0 files removed, 0 files unresolved parent=3 $ revtest '-cC dirty linear' dirty 1 2 -cC abort: cannot specify both -c/--check and -C/--clean parent=1 M foo Test obsolescence behavior --------------------------------------------------------------------- successors should be taken in account when checking head destination $ cat << EOF >> $HGRCPATH > [ui] > logtemplate={rev}:{node|short} {desc|firstline} > [experimental] > evolution=createmarkers > EOF Test no-argument update to a successor of an obsoleted changeset $ hg log -G o 5:ff252e8273df 5 | o 4:d047485b3896 4 | | o 3:6efa171f091b 3 | | | | o 2:bd10386d478c 2 | |/ | @ 1:0786582aa4b1 1 |/ o 0:60829823a42a 0 $ hg book bm -r 3 $ hg status M foo We add simple obsolescence marker between 3 and 4 (indirect successors) $ hg id --debug -i -r 3 6efa171f091b00a3c35edc15d48c52a498929953 $ hg id --debug -i -r 4 d047485b3896813b2a624e86201983520f003206 $ hg debugobsolete 6efa171f091b00a3c35edc15d48c52a498929953 aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa d047485b3896813b2a624e86201983520f003206 Test that 5 is detected as a valid destination from 3 and also accepts moving the bookmark (issue4015) $ hg up --quiet --hidden 3 $ hg up 5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ hg book bm moving bookmark 'bm' forward from 6efa171f091b $ hg bookmarks * bm 5:ff252e8273df Test that 4 is detected as the no-argument destination from 3 and also moves the bookmark with it $ hg up --quiet 0 # we should be able to update to 3 directly $ hg up --quiet --hidden 3 # but not implemented yet. $ hg book -f bm $ hg up 1 files updated, 0 files merged, 0 files removed, 0 files unresolved updating bookmark bm $ hg book * bm 4:d047485b3896 Test that 5 is detected as a valid destination from 1 $ hg up --quiet 0 # we should be able to update to 3 directly $ hg up --quiet --hidden 3 # but not implemented yet. $ hg up 5 1 files updated, 0 files merged, 0 files removed, 0 files unresolved Test that 5 is not detected as a valid destination from 2 $ hg up --quiet 0 $ hg up --quiet 2 $ hg up 5 abort: uncommitted changes (commit or update --clean to discard changes) [255] Test that we don't crash when updating from a pruned changeset (i.e. has no successors). Behavior should probably be that we update to the first non-obsolete parent but that will be decided later. $ hg id --debug -r 2 bd10386d478cd5a9faf2e604114c8e6da62d3889 $ hg up --quiet 0 $ hg up --quiet 2 $ hg debugobsolete bd10386d478cd5a9faf2e604114c8e6da62d3889 $ hg up 0 files updated, 0 files merged, 0 files removed, 0 files unresolved