view mercurial/upgrade.py @ 47387:75e1104f23a2

revlog: use dedicated code for reading sidedata

We are about to introduce a new, dedicated, file to store sidedata. Before doing so, we make sidedata reading go through different code as reading data chunk. This will simplify some of the complexity of the next changesets.

The reading is very simple right now and will need some improvement later to
reuse some of the caching strategy we use for the data file.

Differential Revision: https://phab.mercurial-scm.org/D10785

# upgrade.py - functions for in place upgrade of Mercurial repository
#
# Copyright (c) 2016-present, Gregory Szorc
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

from .i18n import _
from . import (
    error,
    hg,
    localrepo,
    lock as lockmod,
    pycompat,
    requirements as requirementsmod,
    scmutil,
)

from .upgrade_utils import (
    actions as upgrade_actions,
    engine as upgrade_engine,
)

from .utils import (
    stringutil,
)

allformatvariant = upgrade_actions.allformatvariant


def upgraderepo(
    ui,
    repo,
    run=False,
    optimize=None,
    backup=True,
    manifest=None,
    changelog=None,
    filelogs=None,
):
    """Upgrade a repository in place."""
    if optimize is None:
        optimize = {}
    repo = repo.unfiltered()

    revlogs = set(upgrade_engine.UPGRADE_ALL_REVLOGS)
    specentries = (
        (upgrade_engine.UPGRADE_CHANGELOG, changelog),
        (upgrade_engine.UPGRADE_MANIFEST, manifest),
        (upgrade_engine.UPGRADE_FILELOGS, filelogs),
    )
    specified = [(y, x) for (y, x) in specentries if x is not None]
    if specified:
        # we have some limitation on revlogs to be recloned
        if any(x for y, x in specified):
            revlogs = set()
            for upgrade, enabled in specified:
                if enabled:
                    revlogs.add(upgrade)
        else:
            # none are enabled
            for upgrade, __ in specified:
                revlogs.discard(upgrade)

    # Ensure the repository can be upgraded.
    upgrade_actions.check_source_requirements(repo)

    default_options = localrepo.defaultcreateopts(repo.ui)
    newreqs = localrepo.newreporequirements(repo.ui, default_options)
    newreqs.update(upgrade_actions.preservedrequirements(repo))

    upgrade_actions.check_requirements_changes(repo, newreqs)

    # Find and validate all improvements that can be made.
    alloptimizations = upgrade_actions.findoptimizations(repo)

    # Apply and Validate arguments.
    optimizations = []
    for o in alloptimizations:
        if o.name in optimize:
            optimizations.append(o)
            optimize.discard(o.name)

    if optimize:  # anything left is unknown
        raise error.Abort(
            _(b'unknown optimization action requested: %s')
            % b', '.join(sorted(optimize)),
            hint=_(b'run without arguments to see valid optimizations'),
        )

    format_upgrades = upgrade_actions.find_format_upgrades(repo)
    up_actions = upgrade_actions.determine_upgrade_actions(
        repo, format_upgrades, optimizations, repo.requirements, newreqs
    )
    removed_actions = upgrade_actions.find_format_downgrades(repo)

    removedreqs = repo.requirements - newreqs
    addedreqs = newreqs - repo.requirements

    if revlogs != upgrade_engine.UPGRADE_ALL_REVLOGS:
        incompatible = upgrade_actions.RECLONES_REQUIREMENTS & (
            removedreqs | addedreqs
        )
        if incompatible:
            msg = _(
                b'ignoring revlogs selection flags, format requirements '
                b'change: %s\n'
            )
            ui.warn(msg % b', '.join(sorted(incompatible)))
            revlogs = upgrade_engine.UPGRADE_ALL_REVLOGS

    upgrade_op = upgrade_actions.UpgradeOperation(
        ui,
        newreqs,
        repo.requirements,
        up_actions,
        removed_actions,
        revlogs,
        backup,
    )

    if not run:
        fromconfig = []
        onlydefault = []

        for d in format_upgrades:
            if d.fromconfig(repo):
                fromconfig.append(d)
            elif d.default:
                onlydefault.append(d)

        if fromconfig or onlydefault:

            if fromconfig:
                ui.status(
                    _(
                        b'repository lacks features recommended by '
                        b'current config options:\n\n'
                    )
                )
                for i in fromconfig:
                    ui.status(b'%s\n   %s\n\n' % (i.name, i.description))

            if onlydefault:
                ui.status(
                    _(
                        b'repository lacks features used by the default '
                        b'config options:\n\n'
                    )
                )
                for i in onlydefault:
                    ui.status(b'%s\n   %s\n\n' % (i.name, i.description))

            ui.status(b'\n')
        else:
            ui.status(_(b'(no format upgrades found in existing repository)\n'))

        ui.status(
            _(
                b'performing an upgrade with "--run" will make the following '
                b'changes:\n\n'
            )
        )

        upgrade_op.print_requirements()
        upgrade_op.print_optimisations()
        upgrade_op.print_upgrade_actions()
        upgrade_op.print_affected_revlogs()

        if upgrade_op.unused_optimizations:
            ui.status(
                _(
                    b'additional optimizations are available by specifying '
                    b'"--optimize <name>":\n\n'
                )
            )
            upgrade_op.print_unused_optimizations()
        return

    if not (upgrade_op.upgrade_actions or upgrade_op.removed_actions):
        ui.status(_(b'nothing to do\n'))
        return
    # Else we're in the run=true case.
    ui.write(_(b'upgrade will perform the following actions:\n\n'))
    upgrade_op.print_requirements()
    upgrade_op.print_optimisations()
    upgrade_op.print_upgrade_actions()
    upgrade_op.print_affected_revlogs()

    ui.status(_(b'beginning upgrade...\n'))
    with repo.wlock(), repo.lock():
        ui.status(_(b'repository locked and read-only\n'))
        # Our strategy for upgrading the repository is to create a new,
        # temporary repository, write data to it, then do a swap of the
        # data. There are less heavyweight ways to do this, but it is easier
        # to create a new repo object than to instantiate all the components
        # (like the store) separately.
        tmppath = pycompat.mkdtemp(prefix=b'upgrade.', dir=repo.path)
        backuppath = None
        try:
            ui.status(
                _(
                    b'creating temporary repository to stage upgraded '
                    b'data: %s\n'
                )
                % tmppath
            )

            # clone ui without using ui.copy because repo.ui is protected
            repoui = repo.ui.__class__(repo.ui)
            dstrepo = hg.repository(repoui, path=tmppath, create=True)

            with dstrepo.wlock(), dstrepo.lock():
                backuppath = upgrade_engine.upgrade(
                    ui, repo, dstrepo, upgrade_op
                )

        finally:
            ui.status(_(b'removing temporary repository %s\n') % tmppath)
            repo.vfs.rmtree(tmppath, forcibly=True)

            if backuppath and not ui.quiet:
                ui.warn(
                    _(b'copy of old repository backed up at %s\n') % backuppath
                )
                ui.warn(
                    _(
                        b'the old repository will not be deleted; remove '
                        b'it to free up disk space once the upgraded '
                        b'repository is verified\n'
                    )
                )

            upgrade_op.print_post_op_messages()


def upgrade_share_to_safe(
    ui,
    hgvfs,
    storevfs,
    current_requirements,
    mismatch_config,
    mismatch_warn,
):
    """Upgrades a share to use share-safe mechanism"""
    wlock = None
    store_requirements = localrepo._readrequires(storevfs, False)
    original_crequirements = current_requirements.copy()
    # after upgrade, store requires will be shared, so lets find
    # the requirements which are not present in store and
    # write them to share's .hg/requires
    diffrequires = current_requirements - store_requirements
    # add share-safe requirement as it will mark the share as share-safe
    diffrequires.add(requirementsmod.SHARESAFE_REQUIREMENT)
    current_requirements.add(requirementsmod.SHARESAFE_REQUIREMENT)
    # in `allow` case, we don't try to upgrade, we just respect the source
    # state, update requirements and continue
    if mismatch_config == b'allow':
        return
    try:
        wlock = lockmod.trylock(ui, hgvfs, b'wlock', 0, 0)
        # some process might change the requirement in between, re-read
        # and update current_requirements
        locked_requirements = localrepo._readrequires(hgvfs, True)
        if locked_requirements != original_crequirements:
            removed = current_requirements - locked_requirements
            # update current_requirements in place because it's passed
            # as reference
            current_requirements -= removed
            current_requirements |= locked_requirements
            diffrequires = current_requirements - store_requirements
            # add share-safe requirement as it will mark the share as share-safe
            diffrequires.add(requirementsmod.SHARESAFE_REQUIREMENT)
            current_requirements.add(requirementsmod.SHARESAFE_REQUIREMENT)
        scmutil.writerequires(hgvfs, diffrequires)
        ui.warn(_(b'repository upgraded to use share-safe mode\n'))
    except error.LockError as e:
        hint = _(
            "see `hg help config.format.use-share-safe` for more information"
        )
        if mismatch_config == b'upgrade-abort':
            raise error.Abort(
                _(b'failed to upgrade share, got error: %s')
                % stringutil.forcebytestr(e.strerror),
                hint=hint,
            )
        elif mismatch_warn:
            ui.warn(
                _(b'failed to upgrade share, got error: %s\n')
                % stringutil.forcebytestr(e.strerror),
                hint=hint,
            )
    finally:
        if wlock:
            wlock.release()


def downgrade_share_to_non_safe(
    ui,
    hgvfs,
    sharedvfs,
    current_requirements,
    mismatch_config,
    mismatch_warn,
):
    """Downgrades a share which use share-safe to not use it"""
    wlock = None
    source_requirements = localrepo._readrequires(sharedvfs, True)
    original_crequirements = current_requirements.copy()
    # we cannot be 100% sure on which requirements were present in store when
    # the source supported share-safe. However, we do know that working
    # directory requirements were not there. Hence we remove them
    source_requirements -= requirementsmod.WORKING_DIR_REQUIREMENTS
    current_requirements |= source_requirements
    current_requirements.remove(requirementsmod.SHARESAFE_REQUIREMENT)
    if mismatch_config == b'allow':
        return

    try:
        wlock = lockmod.trylock(ui, hgvfs, b'wlock', 0, 0)
        # some process might change the requirement in between, re-read
        # and update current_requirements
        locked_requirements = localrepo._readrequires(hgvfs, True)
        if locked_requirements != original_crequirements:
            removed = current_requirements - locked_requirements
            # update current_requirements in place because it's passed
            # as reference
            current_requirements -= removed
            current_requirements |= locked_requirements
            current_requirements |= source_requirements
            current_requirements -= set(requirementsmod.SHARESAFE_REQUIREMENT)
        scmutil.writerequires(hgvfs, current_requirements)
        ui.warn(_(b'repository downgraded to not use share-safe mode\n'))
    except error.LockError as e:
        hint = _(
            "see `hg help config.format.use-share-safe` for more information"
        )
        # If upgrade-abort is set, abort when upgrade fails, else let the
        # process continue as `upgrade-allow` is set
        if mismatch_config == b'downgrade-abort':
            raise error.Abort(
                _(b'failed to downgrade share, got error: %s')
                % stringutil.forcebytestr(e.strerror),
                hint=hint,
            )
        elif mismatch_warn:
            ui.warn(
                _(b'failed to downgrade share, got error: %s\n')
                % stringutil.forcebytestr(e.strerror),
                hint=hint,
            )
    finally:
        if wlock:
            wlock.release()