view mercurial/unionrepo.py @ 51935:77e2994bd617

mdiff: convert a few block definitions from lists to tuples

These were flagged by adding type hints.  Some places were using a tuple of 4
ints to define a block, and others were using a list of 4.  A tuple is better
for typing, because we can define the length and the type of each entry.  One of
the places had to redefine the tuple, since writing to a tuple at an index isn't
supported.

This change spills out into the tests, and archeology says it was added to the
repo in this state.  There was no reason given for the divergence, and I suspect
it wasn't intentional.

It looks like `splitblock()` is completely unused in the codebase.

# unionrepo.py - repository class for viewing union of repository changesets
#
# Derived from bundlerepo.py
# Copyright 2006, 2007 Benoit Boissinot <[e-mail]>
# Copyright 2013 Unity Technologies, Mads Kiilerich <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""Repository class for "in-memory pull" of one local repository to another,
allowing operations like diff and log with revsets.
"""

from __future__ import annotations

import contextlib
import typing

from .i18n import _

from . import (
    changelog,
    cmdutil,
    encoding,
    error,
    filelog,
    localrepo,
    manifest,
    mdiff,
    pathutil,
    revlog,
    util,
    vfs as vfsmod,
)

from .revlogutils import (
    constants as revlog_constants,
)


class unionrevlog(revlog.revlog):
    def __init__(self, opener: typing.Any, radix, revlog2, linkmapper):
        # TODO: figure out real type of opener
        #
        # How it works:
        # To retrieve a revision, we just need to know the node id so we can
        # look it up in revlog2.
        #
        # To differentiate a rev in the second revlog from a rev in the revlog,
        # we check revision against repotiprev.
        opener = vfsmod.readonlyvfs(opener)
        target = getattr(revlog2, 'target', None)
        if target is None:
            # Help pytype- changelog and revlog are not possible here because
            # they both have a 'target' attr.
            assert not isinstance(revlog2, (changelog.changelog, revlog.revlog))

            # a revlog wrapper, eg: the manifestlog that is not an actual revlog
            target = revlog2._revlog.target
        revlog.revlog.__init__(self, opener, target=target, radix=radix)
        self.revlog2 = revlog2

        n = len(self)
        self.repotiprev = n - 1
        self.bundlerevs = set()  # used by 'bundle()' revset expression
        for rev2 in self.revlog2:
            rev = self.revlog2.index[rev2]
            # rev numbers - in revlog2, very different from self.rev
            (
                _start,
                _csize,
                rsize,
                base,
                linkrev,
                p1rev,
                p2rev,
                node,
                _sdo,
                _sds,
                _dcm,
                _sdcm,
                rank,
            ) = rev
            flags = _start & 0xFFFF

            if linkmapper is None:  # link is to same revlog
                assert linkrev == rev2  # we never link back
                link = n
            else:  # rev must be mapped from repo2 cl to unified cl by linkmapper
                link = linkmapper(linkrev)

            if linkmapper is not None:  # link is to same revlog
                base = linkmapper(base)

            this_rev = self.index.get_rev(node)
            if this_rev is not None:
                # this happens for the common revlog revisions
                self.bundlerevs.add(this_rev)
                continue

            p1node = self.revlog2.node(p1rev)
            p2node = self.revlog2.node(p2rev)

            # TODO: it's probably wrong to set compressed length to -1, but
            # I have no idea if csize is valid in the base revlog context.
            e = (
                flags,
                -1,
                rsize,
                base,
                link,
                self.rev(p1node),
                self.rev(p2node),
                node,
                0,  # sidedata offset
                0,  # sidedata size
                revlog_constants.COMP_MODE_INLINE,
                revlog_constants.COMP_MODE_INLINE,
                rank,
            )
            self.index.append(e)
            self.bundlerevs.add(n)
            n += 1

    @contextlib.contextmanager
    def reading(self):
        if 0 <= len(self.bundlerevs) < len(self.index):
            read_1 = super().reading
        else:
            read_1 = util.nullcontextmanager
        if 0 < len(self.bundlerevs):
            read_2 = self.revlog2.reading
        else:
            read_2 = util.nullcontextmanager
        with read_1(), read_2():
            yield

    def _chunk(self, rev):
        if rev <= self.repotiprev:
            return super(unionrevlog, self)._inner._chunk(rev)
        return self.revlog2._chunk(self.node(rev))

    def revdiff(self, rev1, rev2):
        """return or calculate a delta between two revisions"""
        if rev1 > self.repotiprev and rev2 > self.repotiprev:
            return self.revlog2.revdiff(
                self.revlog2.rev(self.node(rev1)),
                self.revlog2.rev(self.node(rev2)),
            )
        elif rev1 <= self.repotiprev and rev2 <= self.repotiprev:
            return super(unionrevlog, self).revdiff(rev1, rev2)

        return mdiff.textdiff(self.rawdata(rev1), self.rawdata(rev2))

    def _revisiondata(self, nodeorrev, raw=False):
        if isinstance(nodeorrev, int):
            rev = nodeorrev
            node = self.node(rev)
        else:
            node = nodeorrev
            rev = self.rev(node)

        if rev > self.repotiprev:
            # work around manifestrevlog NOT being a revlog
            revlog2 = getattr(self.revlog2, '_revlog', self.revlog2)
            func = revlog2._revisiondata
        else:
            func = super(unionrevlog, self)._revisiondata
        return func(node, raw=raw)

    def addrevision(
        self,
        text,
        transaction,
        link,
        p1,
        p2,
        cachedelta=None,
        node=None,
        flags=revlog.REVIDX_DEFAULT_FLAGS,
        deltacomputer=None,
        sidedata=None,
    ):
        raise NotImplementedError

    def addgroup(
        self,
        deltas,
        linkmapper,
        transaction,
        alwayscache=False,
        addrevisioncb=None,
        duplicaterevisioncb=None,
        debug_info=None,
        delta_base_reuse_policy=None,
    ):
        raise NotImplementedError

    def strip(self, minlink, transaction):
        raise NotImplementedError

    def checksize(self):
        raise NotImplementedError


class unionchangelog(unionrevlog, changelog.changelog):
    def __init__(self, opener, opener2):
        changelog.changelog.__init__(self, opener)
        linkmapper = None
        changelog2 = changelog.changelog(opener2)
        unionrevlog.__init__(self, opener, self.radix, changelog2, linkmapper)


class unionmanifest(unionrevlog, manifest.manifestrevlog):
    repotiprev: int
    revlog2: manifest.ManifestRevlog

    def __init__(self, nodeconstants, opener, opener2, linkmapper):
        # XXX manifestrevlog is not actually a revlog , so mixing it with
        # bundlerevlog is not a good idea.
        manifest.manifestrevlog.__init__(self, nodeconstants, opener)
        manifest2 = manifest.manifestrevlog(nodeconstants, opener2)
        unionrevlog.__init__(
            self, opener, self._revlog.radix, manifest2, linkmapper
        )


class unionfilelog(filelog.filelog):
    _revlog: unionrevlog
    repotiprev: int
    revlog2: revlog.revlog

    def __init__(self, opener, path, opener2, linkmapper, repo):
        filelog.filelog.__init__(self, opener, path)
        filelog2 = filelog.filelog(opener2, path)
        self._revlog = unionrevlog(
            opener, self._revlog.radix, filelog2._revlog, linkmapper
        )
        self._repo = repo
        self.repotiprev = self._revlog.repotiprev
        self.revlog2 = self._revlog.revlog2

    def iscensored(self, rev):
        """Check if a revision is censored."""
        if rev <= self.repotiprev:
            return filelog.filelog.iscensored(self, rev)
        node = self.node(rev)
        return self.revlog2.iscensored(self.revlog2.rev(node))


class unionpeer(localrepo.localpeer):
    def canpush(self):
        return False


_union_repo_baseclass = object

if typing.TYPE_CHECKING:
    _union_repo_baseclass = localrepo.localrepository


class unionrepository(_union_repo_baseclass):
    """Represents the union of data in 2 repositories.

    Instances are not usable if constructed directly. Use ``instance()``
    or ``makeunionrepository()`` to create a usable instance.
    """

    # noinspection PyMissingConstructor
    def __init__(self, repo2, url):
        self.repo2 = repo2
        self._url = url

        self.ui.setconfig(b'phases', b'publish', False, b'unionrepo')

    @localrepo.unfilteredpropertycache
    def changelog(self):
        return unionchangelog(self.svfs, self.repo2.svfs)

    @localrepo.unfilteredpropertycache
    def manifestlog(self):
        rootstore = unionmanifest(
            self.nodeconstants,
            self.svfs,
            self.repo2.svfs,
            self.unfiltered()._clrev,
        )
        return manifest.manifestlog(
            self.svfs, self, rootstore, self.narrowmatch()
        )

    def _clrev(self, rev2):
        """map from repo2 changelog rev to temporary rev in self.changelog"""
        node = self.repo2.changelog.node(rev2)
        return self.changelog.rev(node)

    def url(self):
        return self._url

    def file(self, f):
        return unionfilelog(
            self.svfs, f, self.repo2.svfs, self.unfiltered()._clrev, self
        )

    def close(self):
        self.repo2.close()

    def cancopy(self):
        return False

    def peer(self, path=None, remotehidden=False):
        return unionpeer(self, path=None, remotehidden=remotehidden)

    def getcwd(self):
        return encoding.getcwd()  # always outside the repo


def instance(ui, path, create, intents=None, createopts=None):
    if create:
        raise error.Abort(_(b'cannot create new union repository'))
    parentpath = ui.config(b"bundle", b"mainreporoot")
    if not parentpath:
        # try to find the correct path to the working directory repo
        parentpath = cmdutil.findrepo(encoding.getcwd())
        if parentpath is None:
            parentpath = b''
    if parentpath:
        # Try to make the full path relative so we get a nice, short URL.
        # In particular, we don't want temp dir names in test outputs.
        cwd = encoding.getcwd()
        if parentpath == cwd:
            parentpath = b''
        else:
            cwd = pathutil.normasprefix(cwd)
            if parentpath.startswith(cwd):
                parentpath = parentpath[len(cwd) :]
    if path.startswith(b'union:'):
        s = path.split(b":", 1)[1].split(b"+", 1)
        if len(s) == 1:
            repopath, repopath2 = parentpath, s[0]
        else:
            repopath, repopath2 = s
    else:
        repopath, repopath2 = parentpath, path

    return makeunionrepository(ui, repopath, repopath2)


def makeunionrepository(ui, repopath1, repopath2):
    """Make a union repository object from 2 local repo paths."""
    repo1 = localrepo.instance(ui, repopath1, create=False)
    repo2 = localrepo.instance(ui, repopath2, create=False)

    url = b'union:%s+%s' % (
        util.expandpath(repopath1),
        util.expandpath(repopath2),
    )

    class derivedunionrepository(unionrepository, repo1.__class__):
        pass

    repo = repo1
    repo.__class__ = derivedunionrepository
    unionrepository.__init__(repo1, repo2, url)

    return repo