view mercurial/wireprotov1peer.py @ 47093:787ff5d21bcd

dirstate-tree: Make Rust DirstateMap bindings go through a trait object

This changeset starts a series that adds an experiment to make status faster
by changing the dirstate (first only in memory and later also on disk) to
be shaped as a tree matching the directory structure, instead of the current
flat collection of entries. The status algorithm can then traverse this tree
dirstate at the same time as it traverses the filesystem.

We (Octobus) have made prototypes that show promising results but are prone
to bitrot. We would like to start upstreaming some experimental Rust code that
goes in this direction, but to avoid disrupting users it should only be
enabled by some run-time opt-in while keeping the existing dirstate structure
and status algorithm as-is.

The `DirstateMap` type and `status` function look like the appropriate
boundary. This adds a new trait that abstracts everything Python bindings need
and makes those bindings go through a `dyn` trait object. Later we’ll have two
implementations of this trait, and the same bindings can use either.

Differential Revision: https://phab.mercurial-scm.org/D10362

# wireprotov1peer.py - Client-side functionality for wire protocol version 1.
#
# Copyright 2005-2010 Olivia Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import

import sys
import weakref

from .i18n import _
from .node import bin
from .pycompat import (
    getattr,
    setattr,
)
from . import (
    bundle2,
    changegroup as changegroupmod,
    encoding,
    error,
    pushkey as pushkeymod,
    pycompat,
    util,
    wireprototypes,
)
from .interfaces import (
    repository,
    util as interfaceutil,
)
from .utils import hashutil

urlreq = util.urlreq


def batchable(f):
    """annotation for batchable methods

    Such methods must implement a coroutine as follows:

    @batchable
    def sample(self, one, two=None):
        # Build list of encoded arguments suitable for your wire protocol:
        encoded_args = [('one', encode(one),), ('two', encode(two),)]
        # Create future for injection of encoded result:
        encoded_res_future = future()
        # Return encoded arguments and future:
        yield encoded_args, encoded_res_future
        # Assuming the future to be filled with the result from the batched
        # request now. Decode it:
        yield decode(encoded_res_future.value)

    The decorator returns a function which wraps this coroutine as a plain
    method, but adds the original method as an attribute called "batchable",
    which is used by remotebatch to split the call into separate encoding and
    decoding phases.
    """

    def plain(*args, **opts):
        batchable = f(*args, **opts)
        encoded_args_or_res, encoded_res_future = next(batchable)
        if not encoded_res_future:
            return encoded_args_or_res  # a local result in this case
        self = args[0]
        cmd = pycompat.bytesurl(f.__name__)  # ensure cmd is ascii bytestr
        encoded_res_future.set(self._submitone(cmd, encoded_args_or_res))
        return next(batchable)

    setattr(plain, 'batchable', f)
    setattr(plain, '__name__', f.__name__)
    return plain


class future(object):
    '''placeholder for a value to be set later'''

    def set(self, value):
        if util.safehasattr(self, b'value'):
            raise error.RepoError(b"future is already set")
        self.value = value


def encodebatchcmds(req):
    """Return a ``cmds`` argument value for the ``batch`` command."""
    escapearg = wireprototypes.escapebatcharg

    cmds = []
    for op, argsdict in req:
        # Old servers didn't properly unescape argument names. So prevent
        # the sending of argument names that may not be decoded properly by
        # servers.
        assert all(escapearg(k) == k for k in argsdict)

        args = b','.join(
            b'%s=%s' % (escapearg(k), escapearg(v))
            for k, v in pycompat.iteritems(argsdict)
        )
        cmds.append(b'%s %s' % (op, args))

    return b';'.join(cmds)


class unsentfuture(pycompat.futures.Future):
    """A Future variation to represent an unsent command.

    Because we buffer commands and don't submit them immediately, calling
    ``result()`` on an unsent future could deadlock. Futures for buffered
    commands are represented by this type, which wraps ``result()`` to
    call ``sendcommands()``.
    """

    def result(self, timeout=None):
        if self.done():
            return pycompat.futures.Future.result(self, timeout)

        self._peerexecutor.sendcommands()

        # This looks like it will infinitely recurse. However,
        # sendcommands() should modify __class__. This call serves as a check
        # on that.
        return self.result(timeout)


@interfaceutil.implementer(repository.ipeercommandexecutor)
class peerexecutor(object):
    def __init__(self, peer):
        self._peer = peer
        self._sent = False
        self._closed = False
        self._calls = []
        self._futures = weakref.WeakSet()
        self._responseexecutor = None
        self._responsef = None

    def __enter__(self):
        return self

    def __exit__(self, exctype, excvalee, exctb):
        self.close()

    def callcommand(self, command, args):
        if self._sent:
            raise error.ProgrammingError(
                b'callcommand() cannot be used after commands are sent'
            )

        if self._closed:
            raise error.ProgrammingError(
                b'callcommand() cannot be used after close()'
            )

        # Commands are dispatched through methods on the peer.
        fn = getattr(self._peer, pycompat.sysstr(command), None)

        if not fn:
            raise error.ProgrammingError(
                b'cannot call command %s: method of same name not available '
                b'on peer' % command
            )

        # Commands are either batchable or they aren't. If a command
        # isn't batchable, we send it immediately because the executor
        # can no longer accept new commands after a non-batchable command.
        # If a command is batchable, we queue it for later. But we have
        # to account for the case of a non-batchable command arriving after
        # a batchable one and refuse to service it.

        def addcall():
            f = pycompat.futures.Future()
            self._futures.add(f)
            self._calls.append((command, args, fn, f))
            return f

        if getattr(fn, 'batchable', False):
            f = addcall()

            # But since we don't issue it immediately, we wrap its result()
            # to trigger sending so we avoid deadlocks.
            f.__class__ = unsentfuture
            f._peerexecutor = self
        else:
            if self._calls:
                raise error.ProgrammingError(
                    b'%s is not batchable and cannot be called on a command '
                    b'executor along with other commands' % command
                )

            f = addcall()

            # Non-batchable commands can never coexist with another command
            # in this executor. So send the command immediately.
            self.sendcommands()

        return f

    def sendcommands(self):
        if self._sent:
            return

        if not self._calls:
            return

        self._sent = True

        # Unhack any future types so caller seens a clean type and to break
        # cycle between us and futures.
        for f in self._futures:
            if isinstance(f, unsentfuture):
                f.__class__ = pycompat.futures.Future
                f._peerexecutor = None

        calls = self._calls
        # Mainly to destroy references to futures.
        self._calls = None

        # Simple case of a single command. We call it synchronously.
        if len(calls) == 1:
            command, args, fn, f = calls[0]

            # Future was cancelled. Ignore it.
            if not f.set_running_or_notify_cancel():
                return

            try:
                result = fn(**pycompat.strkwargs(args))
            except Exception:
                pycompat.future_set_exception_info(f, sys.exc_info()[1:])
            else:
                f.set_result(result)

            return

        # Batch commands are a bit harder. First, we have to deal with the
        # @batchable coroutine. That's a bit annoying. Furthermore, we also
        # need to preserve streaming. i.e. it should be possible for the
        # futures to resolve as data is coming in off the wire without having
        # to wait for the final byte of the final response. We do this by
        # spinning up a thread to read the responses.

        requests = []
        states = []

        for command, args, fn, f in calls:
            # Future was cancelled. Ignore it.
            if not f.set_running_or_notify_cancel():
                continue

            try:
                batchable = fn.batchable(
                    fn.__self__, **pycompat.strkwargs(args)
                )
            except Exception:
                pycompat.future_set_exception_info(f, sys.exc_info()[1:])
                return

            # Encoded arguments and future holding remote result.
            try:
                encoded_args_or_res, fremote = next(batchable)
            except Exception:
                pycompat.future_set_exception_info(f, sys.exc_info()[1:])
                return

            if not fremote:
                f.set_result(encoded_args_or_res)
            else:
                requests.append((command, encoded_args_or_res))
                states.append((command, f, batchable, fremote))

        if not requests:
            return

        # This will emit responses in order they were executed.
        wireresults = self._peer._submitbatch(requests)

        # The use of a thread pool executor here is a bit weird for something
        # that only spins up a single thread. However, thread management is
        # hard and it is easy to encounter race conditions, deadlocks, etc.
        # concurrent.futures already solves these problems and its thread pool
        # executor has minimal overhead. So we use it.
        self._responseexecutor = pycompat.futures.ThreadPoolExecutor(1)
        self._responsef = self._responseexecutor.submit(
            self._readbatchresponse, states, wireresults
        )

    def close(self):
        self.sendcommands()

        if self._closed:
            return

        self._closed = True

        if not self._responsef:
            return

        # We need to wait on our in-flight response and then shut down the
        # executor once we have a result.
        try:
            self._responsef.result()
        finally:
            self._responseexecutor.shutdown(wait=True)
            self._responsef = None
            self._responseexecutor = None

            # If any of our futures are still in progress, mark them as
            # errored. Otherwise a result() could wait indefinitely.
            for f in self._futures:
                if not f.done():
                    f.set_exception(
                        error.ResponseError(
                            _(b'unfulfilled batch command response'), None
                        )
                    )

            self._futures = None

    def _readbatchresponse(self, states, wireresults):
        # Executes in a thread to read data off the wire.

        for command, f, batchable, fremote in states:
            # Grab raw result off the wire and teach the internal future
            # about it.
            try:
                remoteresult = next(wireresults)
            except StopIteration:
                # This can happen in particular because next(batchable)
                # in the previous iteration can call peer._abort, which
                # may close the peer.
                f.set_exception(
                    error.ResponseError(
                        _(b'unfulfilled batch command response'), None
                    )
                )
            else:
                fremote.set(remoteresult)

                # And ask the coroutine to decode that value.
                try:
                    result = next(batchable)
                except Exception:
                    pycompat.future_set_exception_info(f, sys.exc_info()[1:])
                else:
                    f.set_result(result)


@interfaceutil.implementer(
    repository.ipeercommands, repository.ipeerlegacycommands
)
class wirepeer(repository.peer):
    """Client-side interface for communicating with a peer repository.

    Methods commonly call wire protocol commands of the same name.

    See also httppeer.py and sshpeer.py for protocol-specific
    implementations of this interface.
    """

    def commandexecutor(self):
        return peerexecutor(self)

    # Begin of ipeercommands interface.

    def clonebundles(self):
        self.requirecap(b'clonebundles', _(b'clone bundles'))
        return self._call(b'clonebundles')

    @batchable
    def lookup(self, key):
        self.requirecap(b'lookup', _(b'look up remote revision'))
        f = future()
        yield {b'key': encoding.fromlocal(key)}, f
        d = f.value
        success, data = d[:-1].split(b" ", 1)
        if int(success):
            yield bin(data)
        else:
            self._abort(error.RepoError(data))

    @batchable
    def heads(self):
        f = future()
        yield {}, f
        d = f.value
        try:
            yield wireprototypes.decodelist(d[:-1])
        except ValueError:
            self._abort(error.ResponseError(_(b"unexpected response:"), d))

    @batchable
    def known(self, nodes):
        f = future()
        yield {b'nodes': wireprototypes.encodelist(nodes)}, f
        d = f.value
        try:
            yield [bool(int(b)) for b in pycompat.iterbytestr(d)]
        except ValueError:
            self._abort(error.ResponseError(_(b"unexpected response:"), d))

    @batchable
    def branchmap(self):
        f = future()
        yield {}, f
        d = f.value
        try:
            branchmap = {}
            for branchpart in d.splitlines():
                branchname, branchheads = branchpart.split(b' ', 1)
                branchname = encoding.tolocal(urlreq.unquote(branchname))
                branchheads = wireprototypes.decodelist(branchheads)
                branchmap[branchname] = branchheads
            yield branchmap
        except TypeError:
            self._abort(error.ResponseError(_(b"unexpected response:"), d))

    @batchable
    def listkeys(self, namespace):
        if not self.capable(b'pushkey'):
            yield {}, None
        f = future()
        self.ui.debug(b'preparing listkeys for "%s"\n' % namespace)
        yield {b'namespace': encoding.fromlocal(namespace)}, f
        d = f.value
        self.ui.debug(
            b'received listkey for "%s": %i bytes\n' % (namespace, len(d))
        )
        yield pushkeymod.decodekeys(d)

    @batchable
    def pushkey(self, namespace, key, old, new):
        if not self.capable(b'pushkey'):
            yield False, None
        f = future()
        self.ui.debug(b'preparing pushkey for "%s:%s"\n' % (namespace, key))
        yield {
            b'namespace': encoding.fromlocal(namespace),
            b'key': encoding.fromlocal(key),
            b'old': encoding.fromlocal(old),
            b'new': encoding.fromlocal(new),
        }, f
        d = f.value
        d, output = d.split(b'\n', 1)
        try:
            d = bool(int(d))
        except ValueError:
            raise error.ResponseError(
                _(b'push failed (unexpected response):'), d
            )
        for l in output.splitlines(True):
            self.ui.status(_(b'remote: '), l)
        yield d

    def stream_out(self):
        return self._callstream(b'stream_out')

    def getbundle(self, source, **kwargs):
        kwargs = pycompat.byteskwargs(kwargs)
        self.requirecap(b'getbundle', _(b'look up remote changes'))
        opts = {}
        bundlecaps = kwargs.get(b'bundlecaps') or set()
        for key, value in pycompat.iteritems(kwargs):
            if value is None:
                continue
            keytype = wireprototypes.GETBUNDLE_ARGUMENTS.get(key)
            if keytype is None:
                raise error.ProgrammingError(
                    b'Unexpectedly None keytype for key %s' % key
                )
            elif keytype == b'nodes':
                value = wireprototypes.encodelist(value)
            elif keytype == b'csv':
                value = b','.join(value)
            elif keytype == b'scsv':
                value = b','.join(sorted(value))
            elif keytype == b'boolean':
                value = b'%i' % bool(value)
            elif keytype != b'plain':
                raise KeyError(b'unknown getbundle option type %s' % keytype)
            opts[key] = value
        f = self._callcompressable(b"getbundle", **pycompat.strkwargs(opts))
        if any((cap.startswith(b'HG2') for cap in bundlecaps)):
            return bundle2.getunbundler(self.ui, f)
        else:
            return changegroupmod.cg1unpacker(f, b'UN')

    def unbundle(self, bundle, heads, url):
        """Send cg (a readable file-like object representing the
        changegroup to push, typically a chunkbuffer object) to the
        remote server as a bundle.

        When pushing a bundle10 stream, return an integer indicating the
        result of the push (see changegroup.apply()).

        When pushing a bundle20 stream, return a bundle20 stream.

        `url` is the url the client thinks it's pushing to, which is
        visible to hooks.
        """

        if heads != [b'force'] and self.capable(b'unbundlehash'):
            heads = wireprototypes.encodelist(
                [b'hashed', hashutil.sha1(b''.join(sorted(heads))).digest()]
            )
        else:
            heads = wireprototypes.encodelist(heads)

        if util.safehasattr(bundle, b'deltaheader'):
            # this a bundle10, do the old style call sequence
            ret, output = self._callpush(b"unbundle", bundle, heads=heads)
            if ret == b"":
                raise error.ResponseError(_(b'push failed:'), output)
            try:
                ret = int(ret)
            except ValueError:
                raise error.ResponseError(
                    _(b'push failed (unexpected response):'), ret
                )

            for l in output.splitlines(True):
                self.ui.status(_(b'remote: '), l)
        else:
            # bundle2 push. Send a stream, fetch a stream.
            stream = self._calltwowaystream(b'unbundle', bundle, heads=heads)
            ret = bundle2.getunbundler(self.ui, stream)
        return ret

    # End of ipeercommands interface.

    # Begin of ipeerlegacycommands interface.

    def branches(self, nodes):
        n = wireprototypes.encodelist(nodes)
        d = self._call(b"branches", nodes=n)
        try:
            br = [tuple(wireprototypes.decodelist(b)) for b in d.splitlines()]
            return br
        except ValueError:
            self._abort(error.ResponseError(_(b"unexpected response:"), d))

    def between(self, pairs):
        batch = 8  # avoid giant requests
        r = []
        for i in pycompat.xrange(0, len(pairs), batch):
            n = b" ".join(
                [
                    wireprototypes.encodelist(p, b'-')
                    for p in pairs[i : i + batch]
                ]
            )
            d = self._call(b"between", pairs=n)
            try:
                r.extend(
                    l and wireprototypes.decodelist(l) or []
                    for l in d.splitlines()
                )
            except ValueError:
                self._abort(error.ResponseError(_(b"unexpected response:"), d))
        return r

    def changegroup(self, nodes, source):
        n = wireprototypes.encodelist(nodes)
        f = self._callcompressable(b"changegroup", roots=n)
        return changegroupmod.cg1unpacker(f, b'UN')

    def changegroupsubset(self, bases, heads, source):
        self.requirecap(b'changegroupsubset', _(b'look up remote changes'))
        bases = wireprototypes.encodelist(bases)
        heads = wireprototypes.encodelist(heads)
        f = self._callcompressable(
            b"changegroupsubset", bases=bases, heads=heads
        )
        return changegroupmod.cg1unpacker(f, b'UN')

    # End of ipeerlegacycommands interface.

    def _submitbatch(self, req):
        """run batch request <req> on the server

        Returns an iterator of the raw responses from the server.
        """
        ui = self.ui
        if ui.debugflag and ui.configbool(b'devel', b'debug.peer-request'):
            ui.debug(b'devel-peer-request: batched-content\n')
            for op, args in req:
                msg = b'devel-peer-request:    - %s (%d arguments)\n'
                ui.debug(msg % (op, len(args)))

        unescapearg = wireprototypes.unescapebatcharg

        rsp = self._callstream(b"batch", cmds=encodebatchcmds(req))
        chunk = rsp.read(1024)
        work = [chunk]
        while chunk:
            while b';' not in chunk and chunk:
                chunk = rsp.read(1024)
                work.append(chunk)
            merged = b''.join(work)
            while b';' in merged:
                one, merged = merged.split(b';', 1)
                yield unescapearg(one)
            chunk = rsp.read(1024)
            work = [merged, chunk]
        yield unescapearg(b''.join(work))

    def _submitone(self, op, args):
        return self._call(op, **pycompat.strkwargs(args))

    def debugwireargs(self, one, two, three=None, four=None, five=None):
        # don't pass optional arguments left at their default value
        opts = {}
        if three is not None:
            opts['three'] = three
        if four is not None:
            opts['four'] = four
        return self._call(b'debugwireargs', one=one, two=two, **opts)

    def _call(self, cmd, **args):
        """execute <cmd> on the server

        The command is expected to return a simple string.

        returns the server reply as a string."""
        raise NotImplementedError()

    def _callstream(self, cmd, **args):
        """execute <cmd> on the server

        The command is expected to return a stream. Note that if the
        command doesn't return a stream, _callstream behaves
        differently for ssh and http peers.

        returns the server reply as a file like object.
        """
        raise NotImplementedError()

    def _callcompressable(self, cmd, **args):
        """execute <cmd> on the server

        The command is expected to return a stream.

        The stream may have been compressed in some implementations. This
        function takes care of the decompression. This is the only difference
        with _callstream.

        returns the server reply as a file like object.
        """
        raise NotImplementedError()

    def _callpush(self, cmd, fp, **args):
        """execute a <cmd> on server

        The command is expected to be related to a push. Push has a special
        return method.

        returns the server reply as a (ret, output) tuple. ret is either
        empty (error) or a stringified int.
        """
        raise NotImplementedError()

    def _calltwowaystream(self, cmd, fp, **args):
        """execute <cmd> on server

        The command will send a stream to the server and get a stream in reply.
        """
        raise NotImplementedError()

    def _abort(self, exception):
        """clearly abort the wire protocol connection and raise the exception"""
        raise NotImplementedError()