dirstate-tree: Make Rust DirstateMap bindings go through a trait object
This changeset starts a series that adds an experiment to make status faster
by changing the dirstate (first only in memory and later also on disk) to
be shaped as a tree matching the directory structure, instead of the current
flat collection of entries. The status algorithm can then traverse this tree
dirstate at the same time as it traverses the filesystem.
We (Octobus) have made prototypes that show promising results but are prone
to bitrot. We would like to start upstreaming some experimental Rust code that
goes in this direction, but to avoid disrupting users it should only be
enabled by some run-time opt-in while keeping the existing dirstate structure
and status algorithm as-is.
The `DirstateMap` type and `status` function look like the appropriate
boundary. This adds a new trait that abstracts everything Python bindings need
and makes those bindings go through a `dyn` trait object. Later we’ll have two
implementations of this trait, and the same bindings can use either.
Differential Revision: https://phab.mercurial-scm.org/D10362
$ hg init repo
$ cd repo
$ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
$ hg add a
$ cp a b
$ hg add b
Wide diffstat:
$ hg diff --stat
a | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
b | 213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
2 files changed, 426 insertions(+), 0 deletions(-)
diffstat width:
$ COLUMNS=24 hg diff --config ui.interactive=true --stat
a | 213 ++++++++++++++
b | 213 ++++++++++++++
2 files changed, 426 insertions(+), 0 deletions(-)
$ hg ci -m adda
$ cat >> a <<EOF
> a
> a
> a
> EOF
Narrow diffstat:
$ hg diff --stat
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
$ hg ci -m appenda
>>> open("c", "wb").write(b"\0") and None
$ touch d
$ hg add c d
Binary diffstat:
$ hg diff --stat
c | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Binary git diffstat:
$ hg diff --stat --git
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
$ hg ci -m createb
>>> open("file with spaces", "wb").write(b"\0") and None
$ hg add "file with spaces"
Filename with spaces diffstat:
$ hg diff --stat
file with spaces | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Filename with spaces git diffstat:
$ hg diff --stat --git
file with spaces | Bin
1 files changed, 0 insertions(+), 0 deletions(-)
Filename without "a/" or "b/" (issue5759):
$ hg diff --config 'diff.noprefix=1' -c1 --stat --git
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
$ hg diff --config 'diff.noprefix=1' -c2 --stat --git
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
$ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
changeset: 1:3a95b07bb77f
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: appenda
a | 3 +++
1 files changed, 3 insertions(+), 0 deletions(-)
diff --git a a
--- a
+++ a
@@ -211,3 +211,6 @@
a
a
a
+a
+a
+a
changeset: 2:c60a6c753773
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: createb
c | Bin
d | 0
2 files changed, 0 insertions(+), 0 deletions(-)
diff --git c c
new file mode 100644
index 0000000000000000000000000000000000000000..f76dd238ade08917e6712764a16a22005a50573d
GIT binary patch
literal 1
Ic${MZ000310RR91
diff --git d d
new file mode 100644
diffstat within directories:
$ hg rm -f 'file with spaces'
$ mkdir dir1 dir2
$ echo new1 > dir1/new
$ echo new2 > dir2/new
$ hg add dir1/new dir2/new
$ hg diff --stat
dir1/new | 1 +
dir2/new | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ hg diff --stat --root dir1
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root dir1 dir2
warning: dir2 not inside relative root dir1
$ hg diff --stat --root dir1 -I dir1/old
$ cd dir1
$ hg diff --stat .
dir1/new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat . --config ui.relative-paths=yes
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root .
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg diff --stat --root . --config ui.relative-paths=yes
new | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
$ hg diff --stat --root .. --config ui.relative-paths=yes
new | 1 +
../dir2/new | 1 +
2 files changed, 2 insertions(+), 0 deletions(-)
$ hg diff --stat --root ../dir1 ../dir2
warning: ../dir2 not inside relative root .
$ hg diff --stat --root . -I old
$ cd ..
Files with lines beginning with '--' or '++' should be properly counted in diffstat
$ hg up -Cr tip
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ rm dir1/new
$ rm dir2/new
$ rm "file with spaces"
$ cat > file << EOF
> line 1
> line 2
> line 3
> EOF
$ hg commit -Am file
adding file
Lines added starting with '--' should count as additions
$ cat > file << EOF
> line 1
> -- line 2, with dashes
> line 3
> EOF
$ hg diff --root .
diff -r be1569354b24 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
-line 2
+-- line 2, with dashes
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Lines changed starting with '--' should count as deletions
$ hg commit -m filev2
$ cat > file << EOF
> line 1
> -- line 2, with dashes, changed again
> line 3
> EOF
$ hg diff --root .
diff -r 160f7c034df6 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
--- line 2, with dashes
+-- line 2, with dashes, changed again
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
$ cat > file << EOF
> line 1
> ++ line 2, switched dashes to plusses
> line 3
> EOF
$ hg diff --root .
diff -r 160f7c034df6 file
--- a/file Thu Jan 01 00:00:00 1970 +0000
+++ b/file * (glob)
@@ -1,3 +1,3 @@
line 1
--- line 2, with dashes
+++ line 2, switched dashes to plusses
line 3
$ hg diff --root . --stat
file | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
When a file is renamed, --git shouldn't loss the info about old file
$ hg init issue6025
$ cd issue6025
$ echo > a
$ hg ci -Am 'add a'
adding a
$ hg mv a b
$ hg diff --git
diff --git a/a b/b
rename from a
rename to b
$ hg diff --stat
a | 1 -
b | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)
$ hg diff --stat --git
a => b | 0
1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
$ echo > c
$ hg ci -Am 'add c'
adding c
$ hg mv c 'new c'
$ hg diff --git
diff --git a/c b/new c
rename from c
rename to new c
$ hg diff --stat
c | 1 -
new c | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)
$ hg diff --stat --git
c => new c | 0
1 files changed, 0 insertions(+), 0 deletions(-)
Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)
$ hg status
A new c
R c
$ hg diff --stat -q
c | 1 -
new c | 1 +
2 files changed, 1 insertions(+), 1 deletions(-)