pathutil: use `finddirs_rev_noroot` instead of `parts`
The benefit this brings is very tiny, if it's even there,
since we still didn't get rid of the [parts] computation.
It probably won't be worth it without the subsequent patch
that adds one more use of [finddirs_rev_noroot]
Let commit recurse into subrepos by default to match pre-2.0 behavior:
$ echo "[ui]" >> $HGRCPATH
$ echo "commitsubrepos = Yes" >> $HGRCPATH
$ hg init t
$ cd t
first revision, no sub
$ echo a > a
$ hg ci -Am0
adding a
add first sub
$ echo s = s > .hgsub
$ hg add .hgsub
$ hg init s
$ echo a > s/a
Issue2232: committing a subrepo without .hgsub
$ hg ci -mbad s
abort: can't commit subrepos without .hgsub
[255]
$ hg -R s add s/a
$ hg files -S
.hgsub
a
s/a
`hg files` respects ui.relative-paths
BROKEN: shows subrepo paths relative to the subrepo
$ hg files -S --config ui.relative-paths=no
.hgsub
a
s/a
$ hg -R s ci -Ams0
$ hg sum
parent: 0:f7b1eb17ad24 tip
0
branch: default
commit: 1 added, 1 subrepos
update: (current)
phases: 1 draft
$ hg ci -m1
test handling .hgsubstate "added" explicitly.
$ hg parents --template '{node}\n{files}\n'
7cf8cfea66e410e8e3336508dfeec07b3192de51
.hgsub .hgsubstate
$ hg rollback -q
$ hg add .hgsubstate
$ hg ci -m1
$ hg parents --template '{node}\n{files}\n'
7cf8cfea66e410e8e3336508dfeec07b3192de51
.hgsub .hgsubstate
Subrepopath which overlaps with filepath, does not change warnings in remove()
$ mkdir snot
$ touch snot/file
$ hg remove -S snot/file
not removing snot/file: file is untracked
[1]
$ hg cat snot/filenot
snot/filenot: no such file in rev 7cf8cfea66e4
[1]
$ rm -r snot
Revert subrepo and test subrepo fileset keyword:
$ echo b > s/a
$ hg revert --dry-run "set:subrepo('glob:s*')"
reverting subrepo s
reverting s/a
$ cat s/a
b
$ hg revert "set:subrepo('glob:s*')"
reverting subrepo s
reverting s/a
$ cat s/a
a
$ rm s/a.orig
Revert subrepo with no backup. The "reverting s/a" line is gone since
we're really running 'hg update' in the subrepo:
$ echo b > s/a
$ hg revert --no-backup s
reverting subrepo s
Issue2022: update -C
$ echo b > s/a
$ hg sum
parent: 1:7cf8cfea66e4 tip
1
branch: default
commit: 1 subrepos
update: (current)
phases: 2 draft
$ hg co -C 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg sum
parent: 1:7cf8cfea66e4 tip
1
branch: default
commit: (clean)
update: (current)
phases: 2 draft
commands that require a clean repo should respect subrepos
$ echo b >> s/a
$ hg backout tip
abort: uncommitted changes in subrepository "s"
[255]
$ hg revert -C -R s s/a
add sub sub
$ echo ss = ss > s/.hgsub
$ hg init s/ss
$ echo a > s/ss/a
$ hg -R s add s/.hgsub
$ hg -R s/ss add s/ss/a
$ hg sum
parent: 1:7cf8cfea66e4 tip
1
branch: default
commit: 1 subrepos
update: (current)
phases: 2 draft
$ hg ci -m2
committing subrepository s
committing subrepository s/ss
$ hg sum
parent: 2:df30734270ae tip
2
branch: default
commit: (clean)
update: (current)
phases: 3 draft
test handling .hgsubstate "modified" explicitly.
$ hg parents --template '{node}\n{files}\n'
df30734270ae757feb35e643b7018e818e78a9aa
.hgsubstate
$ hg rollback -q
$ hg status -A .hgsubstate
M .hgsubstate
$ hg ci -m2
$ hg parents --template '{node}\n{files}\n'
df30734270ae757feb35e643b7018e818e78a9aa
.hgsubstate
bump sub rev (and check it is ignored by ui.commitsubrepos)
$ echo b > s/a
$ hg -R s ci -ms1
$ hg --config ui.commitsubrepos=no ci -m3
leave sub dirty (and check ui.commitsubrepos=no aborts the commit)
$ echo c > s/a
$ hg --config ui.commitsubrepos=no ci -m4
abort: uncommitted changes in subrepository "s"
(use --subrepos for recursive commit)
[255]
$ hg id
f6affe3fbfaa+ tip
$ hg -R s ci -mc
$ hg id
f6affe3fbfaa+ tip
$ echo d > s/a
$ hg ci -m4
committing subrepository s
$ hg tip -R s
changeset: 4:02dcf1d70411
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 4
check caching
$ hg co 0
0 files updated, 0 files merged, 2 files removed, 0 files unresolved
$ hg debugsub
restore
$ hg co
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg debugsub
path s
source s
revision 02dcf1d704118aee3ee306ccfa1910850d5b05ef
new branch for merge tests
$ hg co 1
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo t = t >> .hgsub
$ hg init t
$ echo t > t/t
$ hg -R t add t
adding t/t
5
$ hg ci -m5 # add sub
committing subrepository t
created new head
$ echo t2 > t/t
6
$ hg st -R s
$ hg ci -m6 # change sub
committing subrepository t
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
path t
source t
revision 6747d179aa9a688023c4b0cad32e4c92bb7f34ad
$ echo t3 > t/t
7
$ hg ci -m7 # change sub again for conflict test
committing subrepository t
$ hg rm .hgsub
8
$ hg ci -m8 # remove sub
test handling .hgsubstate "removed" explicitly.
$ hg parents --template '{node}\n{files}\n'
96615c1dad2dc8e3796d7332c77ce69156f7b78e
.hgsub .hgsubstate
$ hg rollback -q
$ hg remove .hgsubstate
$ hg ci -m8
$ hg parents --template '{node}\n{files}\n'
96615c1dad2dc8e3796d7332c77ce69156f7b78e
.hgsub .hgsubstate
merge tests
$ hg co -C 3
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 5 # test adding
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg debugsub
path s
source s
revision fc627a69481fcbe5f1135069e8a3881c023e4cf5
path t
source t
revision 60ca1237c19474e7a3978b0dc1ca4e6f36d51382
$ hg ci -m9
created new head
$ hg merge 6 --debug # test change
resolving manifests
branchmerge: True, force: False, partial: False
ancestor: 1f14a2e2d3ec, local: f0d2028bf86d+, remote: 1831e14459c4
starting 4 threads for background file closing (?)
.hgsubstate: versions differ -> m
subrepo merge f0d2028bf86d+ 1831e14459c4 1f14a2e2d3ec
subrepo t: other changed, get t:6747d179aa9a688023c4b0cad32e4c92bb7f34ad:hg
getting subrepo t
resolving manifests
branchmerge: False, force: False, partial: False
ancestor: 60ca1237c194, local: 60ca1237c194+, remote: 6747d179aa9a
t: remote is newer -> g
getting t
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg debugsub
path s
source s
revision fc627a69481fcbe5f1135069e8a3881c023e4cf5
path t
source t
revision 6747d179aa9a688023c4b0cad32e4c92bb7f34ad
$ echo conflict > t/t
$ hg ci -m10
committing subrepository t
$ HGMERGE=internal:merge hg merge --debug 7 # test conflict
resolving manifests
branchmerge: True, force: False, partial: False
ancestor: 1831e14459c4, local: e45c8b14af55+, remote: f94576341bcf
starting 4 threads for background file closing (?)
.hgsubstate: versions differ -> m
subrepo merge e45c8b14af55+ f94576341bcf 1831e14459c4
subrepo t: both sides changed
subrepository t diverged (local revision: 20a0db6fbf6c, remote revision: 7af322bc1198)
starting 4 threads for background file closing (?)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [merge rev].
what do you want to do? m
merging subrepository "t"
resolving manifests
branchmerge: True, force: False, partial: False
ancestor: 6747d179aa9a, local: 20a0db6fbf6c+, remote: 7af322bc1198
starting 4 threads for background file closing (?)
preserving t for resolve of t
t: versions differ -> m
picked tool ':merge' for t (binary False symlink False changedelete False)
merging t
my t@20a0db6fbf6c+ other t@7af322bc1198 ancestor t@6747d179aa9a
warning: conflicts while merging t! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges or 'hg merge --abort' to abandon
subrepo t: merge with t:7af322bc1198a32402fe903e0b7ebcfc5c9bf8f4:hg
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
should conflict
$ cat t/t
<<<<<<< local: 20a0db6fbf6c - test: 10
conflict
=======
t3
>>>>>>> other: 7af322bc1198 - test: 7
11: remove subrepo t
$ hg co -C 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg revert -r 4 .hgsub # remove t
$ hg ci -m11
created new head
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
local removed, remote changed, keep changed
$ hg merge 6
remote [merge rev] changed subrepository t which local [working copy] removed
use (c)hanged version or (d)elete? c
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
BROKEN: should include subrepo t
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
6747d179aa9a688023c4b0cad32e4c92bb7f34ad t
$ hg ci -m 'local removed, remote changed, keep changed'
BROKEN: should include subrepo t
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
BROKEN: should include subrepo t
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ cat t/t
t2
local removed, remote changed, keep removed
$ hg co -C 11
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge --config ui.interactive=true 6 <<EOF
> d
> EOF
remote [merge rev] changed subrepository t which local [working copy] removed
use (c)hanged version or (d)elete? d
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ hg ci -m 'local removed, remote changed, keep removed'
created new head
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
local changed, remote removed, keep changed
$ hg co -C 6
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 11
local [working copy] changed subrepository t which remote [merge rev] removed
use (c)hanged version or (d)elete? c
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
BROKEN: should include subrepo t
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
BROKEN: should include subrepo t
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ hg ci -m 'local changed, remote removed, keep changed'
created new head
BROKEN: should include subrepo t
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
BROKEN: should include subrepo t
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ cat t/t
t2
local changed, remote removed, keep removed
$ hg co -C 6
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge --config ui.interactive=true 11 <<EOF
> d
> EOF
local [working copy] changed subrepository t which remote [merge rev] removed
use (c)hanged version or (d)elete? d
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ hg ci -m 'local changed, remote removed, keep removed'
created new head
$ hg debugsub
path s
source s
revision e4ece1bf43360ddc8f6a96432201a37b7cd27ae4
$ cat .hgsubstate
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
clean up to avoid having to fix up the tests below
$ hg co -C 10
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat >> $HGRCPATH <<EOF
> [extensions]
> strip=
> EOF
$ hg strip -r 11:15
saved backup bundle to $TESTTMP/t/.hg/strip-backup/*-backup.hg (glob)
clone
$ cd ..
$ hg clone t tc
updating to branch default
cloning subrepo s from $TESTTMP/t/s
cloning subrepo s/ss from $TESTTMP/t/s/ss
cloning subrepo t from $TESTTMP/t/t
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd tc
$ hg debugsub
path s
source s
revision fc627a69481fcbe5f1135069e8a3881c023e4cf5
path t
source t
revision 20a0db6fbf6c3d2836e6519a642ae929bfc67c0e
$ cd ..
clone with subrepo disabled (update should fail)
$ hg clone t -U tc2 --config subrepos.allowed=false
$ hg update -R tc2 --config subrepos.allowed=false
abort: subrepos not enabled
(see 'hg help config.subrepos' for details)
[255]
$ ls -A tc2
.hg
.hgsub
.hgsubstate
a
$ hg clone t tc3 --config subrepos.allowed=false
updating to branch default
abort: subrepos not enabled
(see 'hg help config.subrepos' for details)
[255]
$ ls -A tc3
.hg
.hgsub
.hgsubstate
a
And again with just the hg type disabled
$ hg clone t -U tc4 --config subrepos.hg:allowed=false
$ hg update -R tc4 --config subrepos.hg:allowed=false
abort: hg subrepos not allowed
(see 'hg help config.subrepos' for details)
[255]
$ ls -A tc4
.hg
.hgsub
.hgsubstate
a
$ hg clone t tc5 --config subrepos.hg:allowed=false
updating to branch default
abort: hg subrepos not allowed
(see 'hg help config.subrepos' for details)
[255]
$ ls -A tc5
.hg
.hgsub
.hgsubstate
a
push
$ cd tc
$ echo bah > t/t
$ hg ci -m11
committing subrepository t
$ hg push
pushing to $TESTTMP/t
no changes made to subrepo s/ss since last push to $TESTTMP/t/s/ss
no changes made to subrepo s since last push to $TESTTMP/t/s
pushing subrepo t to $TESTTMP/t/t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
push -f
$ echo bah > s/a
$ hg ci -m12
committing subrepository s
$ hg push
pushing to $TESTTMP/t
no changes made to subrepo s/ss since last push to $TESTTMP/t/s/ss
pushing subrepo s to $TESTTMP/t/s
searching for changes
abort: push creates new remote head 12a213df6fa9 (in subrepository "s")
(merge or see 'hg help push' for details about pushing new heads)
[255]
$ hg push -f
pushing to $TESTTMP/t
pushing subrepo s/ss to $TESTTMP/t/s/ss
searching for changes
no changes found
pushing subrepo s to $TESTTMP/t/s
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files (+1 heads)
pushing subrepo t to $TESTTMP/t/t
searching for changes
no changes found
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
check that unmodified subrepos are not pushed
$ hg clone . ../tcc
updating to branch default
cloning subrepo s from $TESTTMP/tc/s
cloning subrepo s/ss from $TESTTMP/tc/s/ss
cloning subrepo t from $TESTTMP/tc/t
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
the subrepos on the new clone have nothing to push to its source
$ hg push -R ../tcc .
pushing to .
no changes made to subrepo s/ss since last push to s/ss
no changes made to subrepo s since last push to s
no changes made to subrepo t since last push to t
searching for changes
no changes found
[1]
the subrepos on the source do not have a clean store versus the clone target
because they were never explicitly pushed to the source
$ hg push ../tcc
pushing to ../tcc
pushing subrepo s/ss to ../tcc/s/ss
searching for changes
no changes found
pushing subrepo s to ../tcc/s
searching for changes
no changes found
pushing subrepo t to ../tcc/t
searching for changes
no changes found
searching for changes
no changes found
[1]
after push their stores become clean
$ hg push ../tcc
pushing to ../tcc
no changes made to subrepo s/ss since last push to ../tcc/s/ss
no changes made to subrepo s since last push to ../tcc/s
no changes made to subrepo t since last push to ../tcc/t
searching for changes
no changes found
[1]
updating a subrepo to a different revision or changing
its working directory does not make its store dirty
$ hg -R s update '.^'
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg push
pushing to $TESTTMP/t
no changes made to subrepo s/ss since last push to $TESTTMP/t/s/ss
no changes made to subrepo s since last push to $TESTTMP/t/s
no changes made to subrepo t since last push to $TESTTMP/t/t
searching for changes
no changes found
[1]
$ echo foo >> s/a
$ hg push
pushing to $TESTTMP/t
no changes made to subrepo s/ss since last push to $TESTTMP/t/s/ss
no changes made to subrepo s since last push to $TESTTMP/t/s
no changes made to subrepo t since last push to $TESTTMP/t/t
searching for changes
no changes found
[1]
$ hg -R s update -C tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
committing into a subrepo makes its store (but not its parent's store) dirty
$ echo foo >> s/ss/a
$ hg -R s/ss commit -m 'test dirty store detection'
$ hg out -S -r `hg log -r tip -T "{node|short}"`
comparing with $TESTTMP/t
searching for changes
no changes found
comparing with $TESTTMP/t/s
searching for changes
no changes found
comparing with $TESTTMP/t/s/ss
searching for changes
changeset: 1:79ea5566a333
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: test dirty store detection
comparing with $TESTTMP/t/t
searching for changes
no changes found
$ hg push
pushing to $TESTTMP/t
pushing subrepo s/ss to $TESTTMP/t/s/ss
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
no changes made to subrepo s since last push to $TESTTMP/t/s
no changes made to subrepo t since last push to $TESTTMP/t/t
searching for changes
no changes found
[1]
a subrepo store may be clean versus one repo but not versus another
$ hg push
pushing to $TESTTMP/t
no changes made to subrepo s/ss since last push to $TESTTMP/t/s/ss
no changes made to subrepo s since last push to $TESTTMP/t/s
no changes made to subrepo t since last push to $TESTTMP/t/t
searching for changes
no changes found
[1]
$ hg push ../tcc
pushing to ../tcc
pushing subrepo s/ss to ../tcc/s/ss
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
no changes made to subrepo s since last push to ../tcc/s
no changes made to subrepo t since last push to ../tcc/t
searching for changes
no changes found
[1]
update
$ cd ../t
$ hg up -C # discard our earlier merge
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "c373c8102e68: 12"
2 other heads for branch "default"
$ echo blah > t/t
$ hg ci -m13
committing subrepository t
backout calls revert internally with minimal opts, which should not raise
KeyError
$ hg backout ".^" --no-commit
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
changeset c373c8102e68 backed out, don't forget to commit.
$ hg up -C # discard changes
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "925c17564ef8: 13"
2 other heads for branch "default"
pull
$ cd ../tc
$ hg pull
pulling from $TESTTMP/t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 925c17564ef8
(run 'hg update' to get a working copy)
should pull t
$ hg incoming -S -r `hg log -r tip -T "{node|short}"`
comparing with $TESTTMP/t
no changes found
comparing with $TESTTMP/t/s
searching for changes
no changes found
comparing with $TESTTMP/t/s/ss
searching for changes
no changes found
comparing with $TESTTMP/t/t
searching for changes
changeset: 5:52c0adc0515a
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 13
$ hg up
pulling subrepo t from $TESTTMP/t/t
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 52c0adc0515a
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "925c17564ef8: 13"
2 other heads for branch "default"
$ cat t/t
blah
bogus subrepo path aborts
$ echo 'bogus=[boguspath' >> .hgsub
$ hg ci -m 'bogus subrepo path'
abort: missing ] in subrepository source
[255]
Issue1986: merge aborts when trying to merge a subrepo that
shouldn't need merging
# subrepo layout
#
# o 5 br
# /|
# o | 4 default
# | |
# | o 3 br
# |/|
# o | 2 default
# | |
# | o 1 br
# |/
# o 0 default
$ cd ..
$ rm -rf sub
$ hg init main
$ cd main
$ hg init s
$ cd s
$ echo a > a
$ hg ci -Am1
adding a
$ hg branch br
marked working directory as branch br
(branches are permanent and global, did you want a bookmark?)
$ echo a >> a
$ hg ci -m1
$ hg up default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo b > b
$ hg ci -Am1
adding b
$ hg up br
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m1
$ hg up 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo c > c
$ hg ci -Am1
adding c
$ hg up 3
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m1
# main repo layout:
#
# * <-- try to merge default into br again
# .`|
# . o 5 br --> substate = 5
# . |
# o | 4 default --> substate = 4
# | |
# | o 3 br --> substate = 2
# |/|
# o | 2 default --> substate = 2
# | |
# | o 1 br --> substate = 3
# |/
# o 0 default --> substate = 2
$ cd ..
$ echo 's = s' > .hgsub
$ hg -R s up 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg ci -Am1
adding .hgsub
$ hg branch br
marked working directory as branch br
(branches are permanent and global, did you want a bookmark?)
$ echo b > b
$ hg -R s up 3
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg ci -Am1
adding b
$ hg up default
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo c > c
$ hg ci -Am1
adding c
$ hg up 1
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg merge 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m1
$ hg up 2
1 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg -R s up 4
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo d > d
$ hg ci -Am1
adding d
$ hg up 3
2 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ hg -R s up 5
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo e > e
$ hg ci -Am1
adding e
$ hg up 5
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg merge 4 # try to merge default into br again
subrepository s diverged (local revision: f8f13b33206e, remote revision: a3f9062a4f88)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [merge rev].
what do you want to do? m
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ cd ..
test subrepo delete from .hgsubstate
$ hg init testdelete
$ mkdir testdelete/nested testdelete/nested2
$ hg init testdelete/nested
$ hg init testdelete/nested2
$ echo test > testdelete/nested/foo
$ echo test > testdelete/nested2/foo
$ hg -R testdelete/nested add
adding testdelete/nested/foo
$ hg -R testdelete/nested2 add
adding testdelete/nested2/foo
$ hg -R testdelete/nested ci -m test
$ hg -R testdelete/nested2 ci -m test
$ echo nested = nested > testdelete/.hgsub
$ echo nested2 = nested2 >> testdelete/.hgsub
$ hg -R testdelete add
adding testdelete/.hgsub
$ hg -R testdelete ci -m "nested 1 & 2 added"
$ echo nested = nested > testdelete/.hgsub
$ hg -R testdelete ci -m "nested 2 deleted"
$ cat testdelete/.hgsubstate
bdf5c9a3103743d900b12ae0db3ffdcfd7b0d878 nested
$ hg -R testdelete remove testdelete/.hgsub
$ hg -R testdelete ci -m ".hgsub deleted"
$ cat testdelete/.hgsubstate
bdf5c9a3103743d900b12ae0db3ffdcfd7b0d878 nested
test repository cloning
$ mkdir mercurial mercurial2
$ hg init nested_absolute
$ echo test > nested_absolute/foo
$ hg -R nested_absolute add
adding nested_absolute/foo
$ hg -R nested_absolute ci -mtest
$ cd mercurial
$ hg init nested_relative
$ echo test2 > nested_relative/foo2
$ hg -R nested_relative add
adding nested_relative/foo2
$ hg -R nested_relative ci -mtest2
$ hg init main
$ echo "nested_relative = ../nested_relative" > main/.hgsub
$ echo "nested_absolute = `pwd`/nested_absolute" >> main/.hgsub
$ hg -R main add
adding main/.hgsub
$ hg -R main ci -m "add subrepos"
$ cd ..
$ hg clone mercurial/main mercurial2/main
updating to branch default
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat mercurial2/main/nested_absolute/.hg/hgrc \
> mercurial2/main/nested_relative/.hg/hgrc
[paths]
default = $TESTTMP/mercurial/nested_absolute
[paths]
default = $TESTTMP/mercurial/nested_relative
$ rm -rf mercurial mercurial2
Issue1977: multirepo push should fail if subrepo push fails
$ hg init repo
$ hg init repo/s
$ echo a > repo/s/a
$ hg -R repo/s ci -Am0
adding a
$ echo s = s > repo/.hgsub
$ hg -R repo ci -Am1
adding .hgsub
$ hg clone repo repo2
updating to branch default
cloning subrepo s from $TESTTMP/repo/s
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg -q -R repo2 pull -u
$ echo 1 > repo2/s/a
$ hg -R repo2/s ci -m2
$ hg -q -R repo2/s push
$ hg -R repo2/s up -C 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 2 > repo2/s/b
$ hg -R repo2/s ci -m3 -A
adding b
created new head
$ hg -R repo2 ci -m3
$ hg -q -R repo2 push
abort: push creates new remote head cc505f09a8b2 (in subrepository "s")
(merge or see 'hg help push' for details about pushing new heads)
[255]
$ hg -R repo update
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
test if untracked file is not overwritten
(this tests also has a change to update .hgsubstate and merge it within the
same second. It should mark is are modified , even if none of mode, size and
timestamp of it isn't changed on the filesystem (see also issue4583))
$ echo issue3276_ok > repo/s/b
$ hg -R repo2 push -f -q
$ hg -R repo update
b: untracked file differs
abort: untracked files in working directory differ from files in requested revision (in subrepository "s")
[255]
$ cat repo/s/b
issue3276_ok
$ rm repo/s/b
$ hg -R repo revert --all
reverting repo/.hgsubstate
reverting subrepo s
$ hg -R repo update
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat repo/s/b
2
$ rm -rf repo2 repo
Issue1852 subrepos with relative paths always push/pull relative to default
Prepare a repo with subrepo
$ hg init issue1852a
$ cd issue1852a
$ hg init sub/repo
$ echo test > sub/repo/foo
$ hg -R sub/repo add sub/repo/foo
$ echo sub/repo = sub/repo > .hgsub
$ hg add .hgsub
$ hg ci -mtest
committing subrepository sub/repo
$ echo test >> sub/repo/foo
$ hg ci -mtest
committing subrepository sub/repo
$ hg cat sub/repo/foo
test
test
$ hg cat sub/repo/foo -Tjson | sed 's|\\\\|/|g'
[
{
"data": "test\ntest\n",
"path": "foo"
}
]
non-exact match:
$ hg cat -T '{path|relpath}\n' 'glob:**'
.hgsub
.hgsubstate
sub/repo/foo
$ hg cat -T '{path|relpath}\n' 're:^sub'
sub/repo/foo
missing subrepos in working directory:
$ mkdir -p tmp/sub/repo
$ hg cat -r 0 --output tmp/%p_p sub/repo/foo
$ cat tmp/sub/repo/foo_p
test
$ mv sub/repo sub_
$ hg cat sub/repo/baz
skipping missing subrepository: sub/repo
[1]
$ rm -rf sub/repo
$ mv sub_ sub/repo
$ cd ..
Create repo without default path, pull top repo, and see what happens on update
$ hg init issue1852b
$ hg -R issue1852b pull issue1852a
pulling from issue1852a
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 3 changes to 2 files
new changesets 19487b456929:be5eb94e7215
(run 'hg update' to get a working copy)
$ hg -R issue1852b update
abort: default path for subrepository not found (in subrepository "sub/repo")
[255]
Ensure a full traceback, not just the SubrepoAbort part
$ hg -R issue1852b update --traceback 2>&1 | grep 'raise error\.Abort'
raise error.Abort(_(b"default path for subrepository not found"))
Pull -u now doesn't help
$ hg -R issue1852b pull -u issue1852a
pulling from issue1852a
searching for changes
no changes found
Try the same, but with pull -u
$ hg init issue1852c
$ hg -R issue1852c pull -r0 -u issue1852a
pulling from issue1852a
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets 19487b456929
cloning subrepo sub/repo from issue1852a/sub/repo
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
Try to push from the other side
$ hg -R issue1852a push `pwd`/issue1852c
pushing to $TESTTMP/issue1852c
pushing subrepo sub/repo to $TESTTMP/issue1852c/sub/repo
searching for changes
no changes found
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
Incoming and outgoing should not use the default path:
$ hg clone -q issue1852a issue1852d
$ hg -R issue1852d outgoing --subrepos issue1852c
comparing with issue1852c
searching for changes
no changes found
comparing with issue1852c/sub/repo
searching for changes
no changes found
[1]
$ hg -R issue1852d incoming --subrepos issue1852c
comparing with issue1852c
searching for changes
no changes found
comparing with issue1852c/sub/repo
searching for changes
no changes found
[1]
Check that merge of a new subrepo doesn't write the uncommitted state to
.hgsubstate (issue4622)
$ hg init issue1852a/addedsub
$ echo zzz > issue1852a/addedsub/zz.txt
$ hg -R issue1852a/addedsub ci -Aqm "initial ZZ"
$ hg clone issue1852a/addedsub issue1852d/addedsub
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo def > issue1852a/sub/repo/foo
$ hg -R issue1852a ci -SAm 'tweaked subrepo'
adding tmp/sub/repo/foo_p
committing subrepository sub/repo
$ echo 'addedsub = addedsub' >> issue1852d/.hgsub
$ echo xyz > issue1852d/sub/repo/foo
$ hg -R issue1852d pull -u
pulling from $TESTTMP/issue1852a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 2 changes to 2 files
new changesets c82b79fdcc5b
subrepository sub/repo diverged (local revision: f42d5c7504a8, remote revision: 46cd4aac504c)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
pulling subrepo sub/repo from $TESTTMP/issue1852a/sub/repo
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets 46cd4aac504c
subrepository sources for sub/repo differ
you can use (l)ocal source (f42d5c7504a8) or (r)emote source (46cd4aac504c).
what do you want to do? l
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat issue1852d/.hgsubstate
f42d5c7504a811dda50f5cf3e5e16c3330b87172 sub/repo
Check status of files when none of them belong to the first
subrepository:
$ hg init subrepo-status
$ cd subrepo-status
$ hg init subrepo-1
$ hg init subrepo-2
$ cd subrepo-2
$ touch file
$ hg add file
$ cd ..
$ echo subrepo-1 = subrepo-1 > .hgsub
$ echo subrepo-2 = subrepo-2 >> .hgsub
$ hg add .hgsub
$ hg ci -m 'Added subrepos'
committing subrepository subrepo-2
$ hg st subrepo-2/file
Check that share works with subrepo
$ hg --config extensions.share= share . ../shared
updating working directory
sharing subrepo subrepo-1 from $TESTTMP/subrepo-status/subrepo-1
sharing subrepo subrepo-2 from $TESTTMP/subrepo-status/subrepo-2
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ find ../shared/* | sort
../shared/subrepo-1
../shared/subrepo-1/.hg
../shared/subrepo-1/.hg/cache
../shared/subrepo-1/.hg/cache/storehash
../shared/subrepo-1/.hg/cache/storehash/* (glob)
../shared/subrepo-1/.hg/hgrc
../shared/subrepo-1/.hg/requires
../shared/subrepo-1/.hg/sharedpath
../shared/subrepo-1/.hg/wcache
../shared/subrepo-2
../shared/subrepo-2/.hg
../shared/subrepo-2/.hg/branch
../shared/subrepo-2/.hg/cache
../shared/subrepo-2/.hg/cache/storehash
../shared/subrepo-2/.hg/cache/storehash/* (glob)
../shared/subrepo-2/.hg/dirstate
../shared/subrepo-2/.hg/hgrc
../shared/subrepo-2/.hg/requires
../shared/subrepo-2/.hg/sharedpath
../shared/subrepo-2/.hg/wcache
../shared/subrepo-2/.hg/wcache/checkisexec (execbit !)
../shared/subrepo-2/.hg/wcache/checklink (symlink no-rust !)
../shared/subrepo-2/.hg/wcache/checklink-target (symlink no-rust !)
../shared/subrepo-2/.hg/wcache/manifestfulltextcache (reporevlogstore !)
../shared/subrepo-2/file
$ hg -R ../shared in
abort: repository default not found
[255]
$ hg -R ../shared/subrepo-2 showconfig paths
paths.default=$TESTTMP/subrepo-status/subrepo-2
$ hg -R ../shared/subrepo-1 sum --remote
parent: -1:000000000000 tip (empty repository)
branch: default
commit: (clean)
update: (current)
remote: (synced)
Check hg update --clean
$ cd $TESTTMP/t
$ rm -r t/t.orig
$ hg status -S --all
C .hgsub
C .hgsubstate
C a
C s/.hgsub
C s/.hgsubstate
C s/a
C s/ss/a
C t/t
$ echo c1 > s/a
$ cd s
$ echo c1 > b
$ echo c1 > c
$ hg add b
$ cd ..
$ hg status -S
M s/a
A s/b
? s/c
$ hg update -C
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
updated to "925c17564ef8: 13"
2 other heads for branch "default"
$ hg status -S
? s/b
? s/c
Sticky subrepositories, no changes
$ cd $TESTTMP/t
$ hg id
925c17564ef8 tip
$ hg -R s id
12a213df6fa9 tip
$ hg -R t id
52c0adc0515a tip
$ hg update 11
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id
365661e5936a
$ hg -R s id
fc627a69481f
$ hg -R t id
e95bcfa18a35
Sticky subrepositories, file changes
$ touch s/f1
$ touch t/f1
$ hg add -S s/f1
$ hg add -S t/f1
$ hg id
365661e5936a+
$ hg -R s id
fc627a69481f+
$ hg -R t id
e95bcfa18a35+
$ hg update tip
subrepository s diverged (local revision: fc627a69481f, remote revision: 12a213df6fa9)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository sources for s differ
you can use (l)ocal source (fc627a69481f) or (r)emote source (12a213df6fa9).
what do you want to do? l
subrepository t diverged (local revision: e95bcfa18a35, remote revision: 52c0adc0515a)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository sources for t differ
you can use (l)ocal source (e95bcfa18a35) or (r)emote source (52c0adc0515a).
what do you want to do? l
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id
925c17564ef8+ tip
$ hg -R s id
fc627a69481f+
$ hg -R t id
e95bcfa18a35+
$ hg update --clean tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
Sticky subrepository, revision updates
$ hg id
925c17564ef8 tip
$ hg -R s id
12a213df6fa9 tip
$ hg -R t id
52c0adc0515a tip
$ cd s
$ hg update -r -2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ../t
$ hg update -r 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..
$ hg update 10
subrepository s diverged (local revision: 12a213df6fa9, remote revision: fc627a69481f)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository t diverged (local revision: 52c0adc0515a, remote revision: 20a0db6fbf6c)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository sources for t differ (in checked out version)
you can use (l)ocal source (7af322bc1198) or (r)emote source (20a0db6fbf6c).
what do you want to do? l
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id
e45c8b14af55+
$ hg -R s id
02dcf1d70411
$ hg -R t id
7af322bc1198
Sticky subrepository, file changes and revision updates
$ touch s/f1
$ touch t/f1
$ hg add -S s/f1
$ hg add -S t/f1
$ hg id
e45c8b14af55+
$ hg -R s id
02dcf1d70411+
$ hg -R t id
7af322bc1198+
$ hg update tip
subrepository s diverged (local revision: 12a213df6fa9, remote revision: 12a213df6fa9)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository sources for s differ
you can use (l)ocal source (02dcf1d70411) or (r)emote source (12a213df6fa9).
what do you want to do? l
subrepository t diverged (local revision: 52c0adc0515a, remote revision: 52c0adc0515a)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
subrepository sources for t differ
you can use (l)ocal source (7af322bc1198) or (r)emote source (52c0adc0515a).
what do you want to do? l
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id
925c17564ef8+ tip
$ hg -R s id
02dcf1d70411+
$ hg -R t id
7af322bc1198+
Sticky repository, update --clean
$ hg update --clean tip
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id
925c17564ef8 tip
$ hg -R s id
12a213df6fa9 tip
$ hg -R t id
52c0adc0515a tip
Test subrepo already at intended revision:
$ cd s
$ hg update fc627a69481f
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd ..
$ hg update 11
subrepository s diverged (local revision: 12a213df6fa9, remote revision: fc627a69481f)
you can (m)erge, keep (l)ocal [working copy] or keep (r)emote [destination].
what do you want to do? m
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
0 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id -n
11+
$ hg -R s id
fc627a69481f
$ hg -R t id
e95bcfa18a35
Test that removing .hgsubstate doesn't break anything:
$ hg rm -f .hgsubstate
$ hg ci -mrm
nothing changed
[1]
$ hg log -vr tip
changeset: 13:925c17564ef8
tag: tip
user: test
date: Thu Jan 01 00:00:00 1970 +0000
files: .hgsubstate
description:
13
Test that removing .hgsub removes .hgsubstate:
$ hg rm .hgsub
$ hg ci -mrm2
created new head
$ hg log -vr tip
changeset: 14:2400bccd50af
tag: tip
parent: 11:365661e5936a
user: test
date: Thu Jan 01 00:00:00 1970 +0000
files: .hgsub .hgsubstate
description:
rm2
Test issue3153: diff -S with deleted subrepos
$ hg diff --nodates -S -c .
diff -r 365661e5936a -r 2400bccd50af .hgsub
--- a/.hgsub
+++ /dev/null
@@ -1,2 +0,0 @@
-s = s
-t = t
diff -r 365661e5936a -r 2400bccd50af .hgsubstate
--- a/.hgsubstate
+++ /dev/null
@@ -1,2 +0,0 @@
-fc627a69481fcbe5f1135069e8a3881c023e4cf5 s
-e95bcfa18a358dc4936da981ebf4147b4cad1362 t
Test behavior of add for explicit path in subrepo:
$ cd ..
$ hg init explicit
$ cd explicit
$ echo s = s > .hgsub
$ hg add .hgsub
$ hg init s
$ hg ci -m0
Adding with an explicit path in a subrepo adds the file
$ echo c1 > f1
$ echo c2 > s/f2
$ hg st -S
? f1
? s/f2
$ hg add s/f2
$ hg st -S
A s/f2
? f1
$ hg ci -R s -m0
$ hg ci -Am1
adding f1
Adding with an explicit path in a subrepo with -S has the same behavior
$ echo c3 > f3
$ echo c4 > s/f4
$ hg st -S
? f3
? s/f4
$ hg add -S s/f4
$ hg st -S
A s/f4
? f3
$ hg ci -R s -m1
$ hg ci -Ama2
adding f3
Adding without a path or pattern silently ignores subrepos
$ echo c5 > f5
$ echo c6 > s/f6
$ echo c7 > s/f7
$ hg st -S
? f5
? s/f6
? s/f7
$ hg add
adding f5
$ hg st -S
A f5
? s/f6
? s/f7
$ hg ci -R s -Am2
adding f6
adding f7
$ hg ci -m3
Adding without a path or pattern with -S also adds files in subrepos
$ echo c8 > f8
$ echo c9 > s/f9
$ echo c10 > s/f10
$ hg st -S
? f8
? s/f10
? s/f9
$ hg add -S
adding f8
adding s/f10
adding s/f9
$ hg st -S
A f8
A s/f10
A s/f9
$ hg ci -R s -m3
$ hg ci -m4
Adding with a pattern silently ignores subrepos
$ echo c11 > fm11
$ echo c12 > fn12
$ echo c13 > s/fm13
$ echo c14 > s/fn14
$ hg st -S
? fm11
? fn12
? s/fm13
? s/fn14
$ hg add 'glob:**fm*'
adding fm11
$ hg st -S
A fm11
? fn12
? s/fm13
? s/fn14
$ hg ci -R s -Am4
adding fm13
adding fn14
$ hg ci -Am5
adding fn12
Adding with a pattern with -S also adds matches in subrepos
$ echo c15 > fm15
$ echo c16 > fn16
$ echo c17 > s/fm17
$ echo c18 > s/fn18
$ hg st -S
? fm15
? fn16
? s/fm17
? s/fn18
$ hg add -S 'glob:**fm*'
adding fm15
adding s/fm17
$ hg st -S
A fm15
A s/fm17
? fn16
? s/fn18
$ hg ci -R s -Am5
adding fn18
$ hg ci -Am6
adding fn16
Test behavior of forget for explicit path in subrepo:
Forgetting an explicit path in a subrepo untracks the file
$ echo c19 > s/f19
$ hg add s/f19
$ hg st -S
A s/f19
$ hg forget s/f19
$ hg st -S
? s/f19
$ rm s/f19
$ cd ..
Courtesy phases synchronisation to publishing server does not block the push
(issue3781)
$ cp -R main issue3781
$ cp -R main issue3781-dest
$ cd issue3781-dest/s
$ hg phase tip # show we have draft changeset
5: draft
$ chmod a-w .hg/store/phaseroots # prevent phase push
$ cd ../../issue3781
$ cat >> .hg/hgrc << EOF
> [paths]
> default=../issue3781-dest/
> EOF
$ hg push --config devel.legacy.exchange=bundle1
pushing to $TESTTMP/issue3781-dest
pushing subrepo s to $TESTTMP/issue3781-dest/s
searching for changes
no changes found
searching for changes
no changes found
[1]
# clean the push cache
$ rm s/.hg/cache/storehash/*
$ hg push # bundle2+
pushing to $TESTTMP/issue3781-dest
pushing subrepo s to $TESTTMP/issue3781-dest/s
searching for changes
no changes found
searching for changes
no changes found
[1]
$ cd ..
Test phase choice for newly created commit with "phases.subrepochecks"
configuration
$ cd t
$ hg update -q -r 12
$ cat >> s/ss/.hg/hgrc <<EOF
> [phases]
> new-commit = secret
> EOF
$ cat >> s/.hg/hgrc <<EOF
> [phases]
> new-commit = draft
> EOF
$ echo phasecheck1 >> s/ss/a
$ hg -R s commit -S --config phases.checksubrepos=abort -m phasecheck1
committing subrepository ss
transaction abort!
rollback completed
abort: can't commit in draft phase conflicting secret from subrepository ss
[255]
$ echo phasecheck2 >> s/ss/a
$ hg -R s commit -S --config phases.checksubrepos=ignore -m phasecheck2
committing subrepository ss
$ hg -R s/ss phase tip
3: secret
$ hg -R s phase tip
6: draft
$ echo phasecheck3 >> s/ss/a
$ hg -R s commit -S -m phasecheck3
committing subrepository ss
warning: changes are committed in secret phase from subrepository ss
$ hg -R s/ss phase tip
4: secret
$ hg -R s phase tip
7: secret
$ cat >> t/.hg/hgrc <<EOF
> [phases]
> new-commit = draft
> EOF
$ cat >> .hg/hgrc <<EOF
> [phases]
> new-commit = public
> EOF
$ echo phasecheck4 >> s/ss/a
$ echo phasecheck4 >> t/t
$ hg commit -S -m phasecheck4
committing subrepository s
committing subrepository s/ss
warning: changes are committed in secret phase from subrepository ss
committing subrepository t
warning: changes are committed in secret phase from subrepository s
created new head
$ hg -R s/ss phase tip
5: secret
$ hg -R s phase tip
8: secret
$ hg -R t phase tip
6: draft
$ hg phase tip
15: secret
$ cd ..
Test that commit --secret works on both repo and subrepo (issue4182)
$ cd main
$ echo secret >> b
$ echo secret >> s/b
$ hg commit --secret --subrepo -m "secret"
committing subrepository s
$ hg phase -r .
6: secret
$ cd s
$ hg phase -r .
6: secret
$ cd ../../
Test "subrepos" template keyword
$ cd t
$ hg update -q 15
$ cat > .hgsub <<EOF
> s = s
> EOF
$ hg commit -m "16"
warning: changes are committed in secret phase from subrepository s
(addition of ".hgsub" itself)
$ hg diff --nodates -c 1 .hgsubstate
diff -r f7b1eb17ad24 -r 7cf8cfea66e4 .hgsubstate
--- /dev/null
+++ b/.hgsubstate
@@ -0,0 +1,1 @@
+e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
$ hg log -r 1 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
f7b1eb17ad24 000000000000
s
(modification of existing entry)
$ hg diff --nodates -c 2 .hgsubstate
diff -r 7cf8cfea66e4 -r df30734270ae .hgsubstate
--- a/.hgsubstate
+++ b/.hgsubstate
@@ -1,1 +1,1 @@
-e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
+dc73e2e6d2675eb2e41e33c205f4bdab4ea5111d s
$ hg log -r 2 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
7cf8cfea66e4 000000000000
s
(addition of entry)
$ hg diff --nodates -c 5 .hgsubstate
diff -r 7cf8cfea66e4 -r 1f14a2e2d3ec .hgsubstate
--- a/.hgsubstate
+++ b/.hgsubstate
@@ -1,1 +1,2 @@
e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
+60ca1237c19474e7a3978b0dc1ca4e6f36d51382 t
$ hg log -r 5 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
7cf8cfea66e4 000000000000
t
(removal of existing entry)
$ hg diff --nodates -c 16 .hgsubstate
diff -r 8bec38d2bd0b -r f2f70bc3d3c9 .hgsubstate
--- a/.hgsubstate
+++ b/.hgsubstate
@@ -1,2 +1,1 @@
0731af8ca9423976d3743119d0865097c07bdc1b s
-e202dc79b04c88a636ea8913d9182a1346d9b3dc t
$ hg log -r 16 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
8bec38d2bd0b 000000000000
t
(merging)
$ hg diff --nodates -c 9 .hgsubstate
diff -r f6affe3fbfaa -r f0d2028bf86d .hgsubstate
--- a/.hgsubstate
+++ b/.hgsubstate
@@ -1,1 +1,2 @@
fc627a69481fcbe5f1135069e8a3881c023e4cf5 s
+60ca1237c19474e7a3978b0dc1ca4e6f36d51382 t
$ hg log -r 9 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
f6affe3fbfaa 1f14a2e2d3ec
t
(removal of ".hgsub" itself)
$ hg diff --nodates -c 8 .hgsubstate
diff -r f94576341bcf -r 96615c1dad2d .hgsubstate
--- a/.hgsubstate
+++ /dev/null
@@ -1,2 +0,0 @@
-e4ece1bf43360ddc8f6a96432201a37b7cd27ae4 s
-7af322bc1198a32402fe903e0b7ebcfc5c9bf8f4 t
$ hg log -r 8 --template "{p1node|short} {p2node|short}\n{subrepos % '{subrepo}\n'}"
f94576341bcf 000000000000
Test that '[paths]' is configured correctly at subrepo creation
$ cd $TESTTMP/tc
$ cat > .hgsub <<EOF
> # to clear bogus subrepo path 'bogus=[boguspath'
> s = s
> t = t
> EOF
$ hg update -q --clean null
$ rm -rf s t
$ cat >> .hg/hgrc <<EOF
> [paths]
> default-push = /foo/bar
> EOF
$ hg update -q
$ cat s/.hg/hgrc
[paths]
default = $TESTTMP/t/s
default-push = /foo/bar/s
$ cat s/ss/.hg/hgrc
[paths]
default = $TESTTMP/t/s/ss
default-push = /foo/bar/s/ss
$ cat t/.hg/hgrc
[paths]
default = $TESTTMP/t/t
default-push = /foo/bar/t
$ cd $TESTTMP/t
$ hg up -qC 0
$ echo 'bar' > bar.txt
$ hg ci -Am 'branch before subrepo add'
adding bar.txt
created new head
$ hg merge -r "first(subrepo('s'))"
2 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg status -S -X '.hgsub*'
A s/a
? s/b
? s/c
? s/f1
$ hg status -S --rev 'p2()'
A bar.txt
? s/b
? s/c
? s/f1
$ hg diff -S -X '.hgsub*' --nodates
diff -r 000000000000 s/a
--- /dev/null
+++ b/s/a
@@ -0,0 +1,1 @@
+a
$ hg diff -S --rev 'p2()' --nodates
diff -r 7cf8cfea66e4 bar.txt
--- /dev/null
+++ b/bar.txt
@@ -0,0 +1,1 @@
+bar
$ hg diff -X '.hgsub*' --nodates s
diff -r 000000000000 s/a
--- /dev/null
+++ b/s/a
@@ -0,0 +1,1 @@
+a
$ hg diff -X '.hgsub*' --nodates s/a
diff -r 000000000000 s/a
--- /dev/null
+++ b/s/a
@@ -0,0 +1,1 @@
+a
$ cd ..
test for ssh exploit 2017-07-25
$ cat >> $HGRCPATH << EOF
> [ui]
> ssh = sh -c "read l; read l; read l"
> EOF
$ hg init malicious-proxycommand
$ cd malicious-proxycommand
$ echo 's = [hg]ssh://-oProxyCommand=touch${IFS}owned/path' > .hgsub
$ hg init s
$ cd s
$ echo init > init
$ hg add
adding init
$ hg commit -m init
$ cd ..
$ hg add .hgsub
$ hg ci -m 'add subrepo'
$ cd ..
$ hg clone malicious-proxycommand malicious-proxycommand-clone
updating to branch default
cloning subrepo s from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path' (in subrepository "s")
[255]
also check that a percent encoded '-' (%2D) doesn't work
$ cd malicious-proxycommand
$ echo 's = [hg]ssh://%2DoProxyCommand=touch${IFS}owned/path' > .hgsub
$ hg ci -m 'change url to percent encoded'
$ cd ..
$ rm -r malicious-proxycommand-clone
$ hg clone malicious-proxycommand malicious-proxycommand-clone
updating to branch default
cloning subrepo s from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path' (in subrepository "s")
[255]
also check for a pipe
$ cd malicious-proxycommand
$ echo 's = [hg]ssh://fakehost|touch${IFS}owned/path' > .hgsub
$ hg ci -m 'change url to pipe'
$ cd ..
$ rm -r malicious-proxycommand-clone
$ hg clone malicious-proxycommand malicious-proxycommand-clone
updating to branch default
cloning subrepo s from ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
abort: no suitable response from remote hg
[255]
$ [ ! -f owned ] || echo 'you got owned'
also check that a percent encoded '|' (%7C) doesn't work
$ cd malicious-proxycommand
$ echo 's = [hg]ssh://fakehost%7Ctouch%20owned/path' > .hgsub
$ hg ci -m 'change url to percent encoded pipe'
$ cd ..
$ rm -r malicious-proxycommand-clone
$ hg clone malicious-proxycommand malicious-proxycommand-clone
updating to branch default
cloning subrepo s from ssh://fakehost%7Ctouch%20owned/path
abort: no suitable response from remote hg
[255]
$ [ ! -f owned ] || echo 'you got owned'
and bad usernames:
$ cd malicious-proxycommand
$ echo 's = [hg]ssh://-oProxyCommand=touch owned@example.com/path' > .hgsub
$ hg ci -m 'owned username'
$ cd ..
$ rm -r malicious-proxycommand-clone
$ hg clone malicious-proxycommand malicious-proxycommand-clone
updating to branch default
cloning subrepo s from ssh://-oProxyCommand%3Dtouch%20owned@example.com/path
abort: potentially unsafe url: 'ssh://-oProxyCommand=touch owned@example.com/path' (in subrepository "s")
[255]
Test convert subrepositories including merge (issue5526):
$ hg init tconv
$ hg convert --config extensions.convert= -q t/s tconv/s
$ hg convert --config extensions.convert= -q t/s/ss tconv/s/ss
$ hg convert --config extensions.convert= -q t/t tconv/t
convert shouldn't fail because of pseudo filenode:
$ hg convert --config extensions.convert= t tconv
scanning source...
sorting...
converting...
17 0
16 1
15 2
14 3
13 4
12 5
11 6
10 7
9 8
8 9
7 10
6 11
5 12
4 13
3 rm2
2 phasecheck4
1 16
0 branch before subrepo add
converted .hgsubstate should point to valid nodes:
$ hg up -R tconv 9
3 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cat tconv/.hgsubstate
fc627a69481fcbe5f1135069e8a3881c023e4cf5 s
60ca1237c19474e7a3978b0dc1ca4e6f36d51382 t