contrib: comment out the 64-bit py38 dependency installation on Windows
Not sure what is going on here, but it appears to not install py3.8 x64 in the
usual `C:\hgdev` directory. The x32 installer works fine. I'm assuming this is
a bug in this version of the installer, but didn't look into it too much.
Differential Revision: https://phab.mercurial-scm.org/D11274
# upgrade.py - functions for in place upgrade of Mercurial repository
#
# Copyright (c) 2016-present, Gregory Szorc
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
from .i18n import _
from . import (
error,
hg,
localrepo,
lock as lockmod,
pycompat,
requirements as requirementsmod,
scmutil,
)
from .upgrade_utils import (
actions as upgrade_actions,
engine as upgrade_engine,
)
from .utils import (
stringutil,
)
allformatvariant = upgrade_actions.allformatvariant
def upgraderepo(
ui,
repo,
run=False,
optimize=None,
backup=True,
manifest=None,
changelog=None,
filelogs=None,
):
"""Upgrade a repository in place."""
if optimize is None:
optimize = {}
repo = repo.unfiltered()
revlogs = set(upgrade_engine.UPGRADE_ALL_REVLOGS)
specentries = (
(upgrade_engine.UPGRADE_CHANGELOG, changelog),
(upgrade_engine.UPGRADE_MANIFEST, manifest),
(upgrade_engine.UPGRADE_FILELOGS, filelogs),
)
specified = [(y, x) for (y, x) in specentries if x is not None]
if specified:
# we have some limitation on revlogs to be recloned
if any(x for y, x in specified):
revlogs = set()
for upgrade, enabled in specified:
if enabled:
revlogs.add(upgrade)
else:
# none are enabled
for upgrade, __ in specified:
revlogs.discard(upgrade)
# Ensure the repository can be upgraded.
upgrade_actions.check_source_requirements(repo)
default_options = localrepo.defaultcreateopts(repo.ui)
newreqs = localrepo.newreporequirements(repo.ui, default_options)
newreqs.update(upgrade_actions.preservedrequirements(repo))
upgrade_actions.check_requirements_changes(repo, newreqs)
# Find and validate all improvements that can be made.
alloptimizations = upgrade_actions.findoptimizations(repo)
# Apply and Validate arguments.
optimizations = []
for o in alloptimizations:
if o.name in optimize:
optimizations.append(o)
optimize.discard(o.name)
if optimize: # anything left is unknown
raise error.Abort(
_(b'unknown optimization action requested: %s')
% b', '.join(sorted(optimize)),
hint=_(b'run without arguments to see valid optimizations'),
)
format_upgrades = upgrade_actions.find_format_upgrades(repo)
up_actions = upgrade_actions.determine_upgrade_actions(
repo, format_upgrades, optimizations, repo.requirements, newreqs
)
removed_actions = upgrade_actions.find_format_downgrades(repo)
removedreqs = repo.requirements - newreqs
addedreqs = newreqs - repo.requirements
if revlogs != upgrade_engine.UPGRADE_ALL_REVLOGS:
incompatible = upgrade_actions.RECLONES_REQUIREMENTS & (
removedreqs | addedreqs
)
if incompatible:
msg = _(
b'ignoring revlogs selection flags, format requirements '
b'change: %s\n'
)
ui.warn(msg % b', '.join(sorted(incompatible)))
revlogs = upgrade_engine.UPGRADE_ALL_REVLOGS
upgrade_op = upgrade_actions.UpgradeOperation(
ui,
newreqs,
repo.requirements,
up_actions,
removed_actions,
revlogs,
backup,
)
if not run:
fromconfig = []
onlydefault = []
for d in format_upgrades:
if d.fromconfig(repo):
fromconfig.append(d)
elif d.default:
onlydefault.append(d)
if fromconfig or onlydefault:
if fromconfig:
ui.status(
_(
b'repository lacks features recommended by '
b'current config options:\n\n'
)
)
for i in fromconfig:
ui.status(b'%s\n %s\n\n' % (i.name, i.description))
if onlydefault:
ui.status(
_(
b'repository lacks features used by the default '
b'config options:\n\n'
)
)
for i in onlydefault:
ui.status(b'%s\n %s\n\n' % (i.name, i.description))
ui.status(b'\n')
else:
ui.status(_(b'(no format upgrades found in existing repository)\n'))
ui.status(
_(
b'performing an upgrade with "--run" will make the following '
b'changes:\n\n'
)
)
upgrade_op.print_requirements()
upgrade_op.print_optimisations()
upgrade_op.print_upgrade_actions()
upgrade_op.print_affected_revlogs()
if upgrade_op.unused_optimizations:
ui.status(
_(
b'additional optimizations are available by specifying '
b'"--optimize <name>":\n\n'
)
)
upgrade_op.print_unused_optimizations()
return
if not (upgrade_op.upgrade_actions or upgrade_op.removed_actions):
ui.status(_(b'nothing to do\n'))
return
# Else we're in the run=true case.
ui.write(_(b'upgrade will perform the following actions:\n\n'))
upgrade_op.print_requirements()
upgrade_op.print_optimisations()
upgrade_op.print_upgrade_actions()
upgrade_op.print_affected_revlogs()
ui.status(_(b'beginning upgrade...\n'))
with repo.wlock(), repo.lock():
ui.status(_(b'repository locked and read-only\n'))
# Our strategy for upgrading the repository is to create a new,
# temporary repository, write data to it, then do a swap of the
# data. There are less heavyweight ways to do this, but it is easier
# to create a new repo object than to instantiate all the components
# (like the store) separately.
tmppath = pycompat.mkdtemp(prefix=b'upgrade.', dir=repo.path)
backuppath = None
try:
ui.status(
_(
b'creating temporary repository to stage upgraded '
b'data: %s\n'
)
% tmppath
)
# clone ui without using ui.copy because repo.ui is protected
repoui = repo.ui.__class__(repo.ui)
dstrepo = hg.repository(repoui, path=tmppath, create=True)
with dstrepo.wlock(), dstrepo.lock():
backuppath = upgrade_engine.upgrade(
ui, repo, dstrepo, upgrade_op
)
finally:
ui.status(_(b'removing temporary repository %s\n') % tmppath)
repo.vfs.rmtree(tmppath, forcibly=True)
if backuppath and not ui.quiet:
ui.warn(
_(b'copy of old repository backed up at %s\n') % backuppath
)
ui.warn(
_(
b'the old repository will not be deleted; remove '
b'it to free up disk space once the upgraded '
b'repository is verified\n'
)
)
upgrade_op.print_post_op_messages()
def upgrade_share_to_safe(
ui,
hgvfs,
storevfs,
current_requirements,
mismatch_config,
mismatch_warn,
):
"""Upgrades a share to use share-safe mechanism"""
wlock = None
store_requirements = localrepo._readrequires(storevfs, False)
original_crequirements = current_requirements.copy()
# after upgrade, store requires will be shared, so lets find
# the requirements which are not present in store and
# write them to share's .hg/requires
diffrequires = current_requirements - store_requirements
# add share-safe requirement as it will mark the share as share-safe
diffrequires.add(requirementsmod.SHARESAFE_REQUIREMENT)
current_requirements.add(requirementsmod.SHARESAFE_REQUIREMENT)
# in `allow` case, we don't try to upgrade, we just respect the source
# state, update requirements and continue
if mismatch_config == b'allow':
return
try:
wlock = lockmod.trylock(ui, hgvfs, b'wlock', 0, 0)
# some process might change the requirement in between, re-read
# and update current_requirements
locked_requirements = localrepo._readrequires(hgvfs, True)
if locked_requirements != original_crequirements:
removed = current_requirements - locked_requirements
# update current_requirements in place because it's passed
# as reference
current_requirements -= removed
current_requirements |= locked_requirements
diffrequires = current_requirements - store_requirements
# add share-safe requirement as it will mark the share as share-safe
diffrequires.add(requirementsmod.SHARESAFE_REQUIREMENT)
current_requirements.add(requirementsmod.SHARESAFE_REQUIREMENT)
scmutil.writerequires(hgvfs, diffrequires)
ui.warn(_(b'repository upgraded to use share-safe mode\n'))
except error.LockError as e:
hint = _(
"see `hg help config.format.use-share-safe` for more information"
)
if mismatch_config == b'upgrade-abort':
raise error.Abort(
_(b'failed to upgrade share, got error: %s')
% stringutil.forcebytestr(e.strerror),
hint=hint,
)
elif mismatch_warn:
ui.warn(
_(b'failed to upgrade share, got error: %s\n')
% stringutil.forcebytestr(e.strerror),
hint=hint,
)
finally:
if wlock:
wlock.release()
def downgrade_share_to_non_safe(
ui,
hgvfs,
sharedvfs,
current_requirements,
mismatch_config,
mismatch_warn,
):
"""Downgrades a share which use share-safe to not use it"""
wlock = None
source_requirements = localrepo._readrequires(sharedvfs, True)
original_crequirements = current_requirements.copy()
# we cannot be 100% sure on which requirements were present in store when
# the source supported share-safe. However, we do know that working
# directory requirements were not there. Hence we remove them
source_requirements -= requirementsmod.WORKING_DIR_REQUIREMENTS
current_requirements |= source_requirements
current_requirements.remove(requirementsmod.SHARESAFE_REQUIREMENT)
if mismatch_config == b'allow':
return
try:
wlock = lockmod.trylock(ui, hgvfs, b'wlock', 0, 0)
# some process might change the requirement in between, re-read
# and update current_requirements
locked_requirements = localrepo._readrequires(hgvfs, True)
if locked_requirements != original_crequirements:
removed = current_requirements - locked_requirements
# update current_requirements in place because it's passed
# as reference
current_requirements -= removed
current_requirements |= locked_requirements
current_requirements |= source_requirements
current_requirements -= set(requirementsmod.SHARESAFE_REQUIREMENT)
scmutil.writerequires(hgvfs, current_requirements)
ui.warn(_(b'repository downgraded to not use share-safe mode\n'))
except error.LockError as e:
hint = _(
"see `hg help config.format.use-share-safe` for more information"
)
# If upgrade-abort is set, abort when upgrade fails, else let the
# process continue as `upgrade-allow` is set
if mismatch_config == b'downgrade-abort':
raise error.Abort(
_(b'failed to downgrade share, got error: %s')
% stringutil.forcebytestr(e.strerror),
hint=hint,
)
elif mismatch_warn:
ui.warn(
_(b'failed to downgrade share, got error: %s\n')
% stringutil.forcebytestr(e.strerror),
hint=hint,
)
finally:
if wlock:
wlock.release()