tests: also allow "Protocol not supported" in test-http-proxy error
I've seen this in a (misconfigured) FreeBSD jail which has ::1 as an
entry for localhost, but IPv6 support is disabled in the jail. It took
me months to figure out what was going on (and I only figured it out
when tinyproxy.py got confused by similar IPv4-level misconfiguration
of the localhost domain in /etc/hosts.)
I don't feel strongly about this patch: on the one hand, it's papering
over a host-level misconfiguration, but on the other it avoids some
weird and hard to diagnose problems that can occur in weirdly
restricted environments.
# debugcommands.py - command processing for debug* commands
#
# Copyright 2005-2016 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
from __future__ import absolute_import
import operator
import os
import random
from .i18n import _
from .node import (
bin,
hex,
nullid,
short,
)
from . import (
bundle2,
changegroup,
cmdutil,
commands,
context,
dagparser,
dagutil,
error,
exchange,
extensions,
fileset,
hg,
localrepo,
lock as lockmod,
pycompat,
repair,
revlog,
scmutil,
setdiscovery,
simplemerge,
streamclone,
treediscovery,
util,
)
release = lockmod.release
# We reuse the command table from commands because it is easier than
# teaching dispatch about multiple tables.
command = cmdutil.command(commands.table)
@command('debugancestor', [], _('[INDEX] REV1 REV2'), optionalrepo=True)
def debugancestor(ui, repo, *args):
"""find the ancestor revision of two revisions in a given index"""
if len(args) == 3:
index, rev1, rev2 = args
r = revlog.revlog(scmutil.opener(pycompat.getcwd(), audit=False), index)
lookup = r.lookup
elif len(args) == 2:
if not repo:
raise error.Abort(_('there is no Mercurial repository here '
'(.hg not found)'))
rev1, rev2 = args
r = repo.changelog
lookup = repo.lookup
else:
raise error.Abort(_('either two or three arguments required'))
a = r.ancestor(lookup(rev1), lookup(rev2))
ui.write('%d:%s\n' % (r.rev(a), hex(a)))
@command('debugapplystreamclonebundle', [], 'FILE')
def debugapplystreamclonebundle(ui, repo, fname):
"""apply a stream clone bundle file"""
f = hg.openpath(ui, fname)
gen = exchange.readbundle(ui, f, fname)
gen.apply(repo)
@command('debugbuilddag',
[('m', 'mergeable-file', None, _('add single file mergeable changes')),
('o', 'overwritten-file', None, _('add single file all revs overwrite')),
('n', 'new-file', None, _('add new file at each rev'))],
_('[OPTION]... [TEXT]'))
def debugbuilddag(ui, repo, text=None,
mergeable_file=False,
overwritten_file=False,
new_file=False):
"""builds a repo with a given DAG from scratch in the current empty repo
The description of the DAG is read from stdin if not given on the
command line.
Elements:
- "+n" is a linear run of n nodes based on the current default parent
- "." is a single node based on the current default parent
- "$" resets the default parent to null (implied at the start);
otherwise the default parent is always the last node created
- "<p" sets the default parent to the backref p
- "*p" is a fork at parent p, which is a backref
- "*p1/p2" is a merge of parents p1 and p2, which are backrefs
- "/p2" is a merge of the preceding node and p2
- ":tag" defines a local tag for the preceding node
- "@branch" sets the named branch for subsequent nodes
- "#...\\n" is a comment up to the end of the line
Whitespace between the above elements is ignored.
A backref is either
- a number n, which references the node curr-n, where curr is the current
node, or
- the name of a local tag you placed earlier using ":tag", or
- empty to denote the default parent.
All string valued-elements are either strictly alphanumeric, or must
be enclosed in double quotes ("..."), with "\\" as escape character.
"""
if text is None:
ui.status(_("reading DAG from stdin\n"))
text = ui.fin.read()
cl = repo.changelog
if len(cl) > 0:
raise error.Abort(_('repository is not empty'))
# determine number of revs in DAG
total = 0
for type, data in dagparser.parsedag(text):
if type == 'n':
total += 1
if mergeable_file:
linesperrev = 2
# make a file with k lines per rev
initialmergedlines = [str(i) for i in xrange(0, total * linesperrev)]
initialmergedlines.append("")
tags = []
wlock = lock = tr = None
try:
wlock = repo.wlock()
lock = repo.lock()
tr = repo.transaction("builddag")
at = -1
atbranch = 'default'
nodeids = []
id = 0
ui.progress(_('building'), id, unit=_('revisions'), total=total)
for type, data in dagparser.parsedag(text):
if type == 'n':
ui.note(('node %s\n' % str(data)))
id, ps = data
files = []
fctxs = {}
p2 = None
if mergeable_file:
fn = "mf"
p1 = repo[ps[0]]
if len(ps) > 1:
p2 = repo[ps[1]]
pa = p1.ancestor(p2)
base, local, other = [x[fn].data() for x in (pa, p1,
p2)]
m3 = simplemerge.Merge3Text(base, local, other)
ml = [l.strip() for l in m3.merge_lines()]
ml.append("")
elif at > 0:
ml = p1[fn].data().split("\n")
else:
ml = initialmergedlines
ml[id * linesperrev] += " r%i" % id
mergedtext = "\n".join(ml)
files.append(fn)
fctxs[fn] = context.memfilectx(repo, fn, mergedtext)
if overwritten_file:
fn = "of"
files.append(fn)
fctxs[fn] = context.memfilectx(repo, fn, "r%i\n" % id)
if new_file:
fn = "nf%i" % id
files.append(fn)
fctxs[fn] = context.memfilectx(repo, fn, "r%i\n" % id)
if len(ps) > 1:
if not p2:
p2 = repo[ps[1]]
for fn in p2:
if fn.startswith("nf"):
files.append(fn)
fctxs[fn] = p2[fn]
def fctxfn(repo, cx, path):
return fctxs.get(path)
if len(ps) == 0 or ps[0] < 0:
pars = [None, None]
elif len(ps) == 1:
pars = [nodeids[ps[0]], None]
else:
pars = [nodeids[p] for p in ps]
cx = context.memctx(repo, pars, "r%i" % id, files, fctxfn,
date=(id, 0),
user="debugbuilddag",
extra={'branch': atbranch})
nodeid = repo.commitctx(cx)
nodeids.append(nodeid)
at = id
elif type == 'l':
id, name = data
ui.note(('tag %s\n' % name))
tags.append("%s %s\n" % (hex(repo.changelog.node(id)), name))
elif type == 'a':
ui.note(('branch %s\n' % data))
atbranch = data
ui.progress(_('building'), id, unit=_('revisions'), total=total)
tr.close()
if tags:
repo.vfs.write("localtags", "".join(tags))
finally:
ui.progress(_('building'), None)
release(tr, lock, wlock)
def _debugchangegroup(ui, gen, all=None, indent=0, **opts):
indent_string = ' ' * indent
if all:
ui.write(("%sformat: id, p1, p2, cset, delta base, len(delta)\n")
% indent_string)
def showchunks(named):
ui.write("\n%s%s\n" % (indent_string, named))
chain = None
for chunkdata in iter(lambda: gen.deltachunk(chain), {}):
node = chunkdata['node']
p1 = chunkdata['p1']
p2 = chunkdata['p2']
cs = chunkdata['cs']
deltabase = chunkdata['deltabase']
delta = chunkdata['delta']
ui.write("%s%s %s %s %s %s %s\n" %
(indent_string, hex(node), hex(p1), hex(p2),
hex(cs), hex(deltabase), len(delta)))
chain = node
chunkdata = gen.changelogheader()
showchunks("changelog")
chunkdata = gen.manifestheader()
showchunks("manifest")
for chunkdata in iter(gen.filelogheader, {}):
fname = chunkdata['filename']
showchunks(fname)
else:
if isinstance(gen, bundle2.unbundle20):
raise error.Abort(_('use debugbundle2 for this file'))
chunkdata = gen.changelogheader()
chain = None
for chunkdata in iter(lambda: gen.deltachunk(chain), {}):
node = chunkdata['node']
ui.write("%s%s\n" % (indent_string, hex(node)))
chain = node
def _debugbundle2(ui, gen, all=None, **opts):
"""lists the contents of a bundle2"""
if not isinstance(gen, bundle2.unbundle20):
raise error.Abort(_('not a bundle2 file'))
ui.write(('Stream params: %s\n' % repr(gen.params)))
for part in gen.iterparts():
ui.write('%s -- %r\n' % (part.type, repr(part.params)))
if part.type == 'changegroup':
version = part.params.get('version', '01')
cg = changegroup.getunbundler(version, part, 'UN')
_debugchangegroup(ui, cg, all=all, indent=4, **opts)
@command('debugbundle',
[('a', 'all', None, _('show all details')),
('', 'spec', None, _('print the bundlespec of the bundle'))],
_('FILE'),
norepo=True)
def debugbundle(ui, bundlepath, all=None, spec=None, **opts):
"""lists the contents of a bundle"""
with hg.openpath(ui, bundlepath) as f:
if spec:
spec = exchange.getbundlespec(ui, f)
ui.write('%s\n' % spec)
return
gen = exchange.readbundle(ui, f, bundlepath)
if isinstance(gen, bundle2.unbundle20):
return _debugbundle2(ui, gen, all=all, **opts)
_debugchangegroup(ui, gen, all=all, **opts)
@command('debugcheckstate', [], '')
def debugcheckstate(ui, repo):
"""validate the correctness of the current dirstate"""
parent1, parent2 = repo.dirstate.parents()
m1 = repo[parent1].manifest()
m2 = repo[parent2].manifest()
errors = 0
for f in repo.dirstate:
state = repo.dirstate[f]
if state in "nr" and f not in m1:
ui.warn(_("%s in state %s, but not in manifest1\n") % (f, state))
errors += 1
if state in "a" and f in m1:
ui.warn(_("%s in state %s, but also in manifest1\n") % (f, state))
errors += 1
if state in "m" and f not in m1 and f not in m2:
ui.warn(_("%s in state %s, but not in either manifest\n") %
(f, state))
errors += 1
for f in m1:
state = repo.dirstate[f]
if state not in "nrm":
ui.warn(_("%s in manifest1, but listed as state %s") % (f, state))
errors += 1
if errors:
error = _(".hg/dirstate inconsistent with current parent's manifest")
raise error.Abort(error)
@command('debugcommands', [], _('[COMMAND]'), norepo=True)
def debugcommands(ui, cmd='', *args):
"""list all available commands and options"""
for cmd, vals in sorted(commands.table.iteritems()):
cmd = cmd.split('|')[0].strip('^')
opts = ', '.join([i[1] for i in vals[1]])
ui.write('%s: %s\n' % (cmd, opts))
@command('debugcomplete',
[('o', 'options', None, _('show the command options'))],
_('[-o] CMD'),
norepo=True)
def debugcomplete(ui, cmd='', **opts):
"""returns the completion list associated with the given command"""
if opts.get('options'):
options = []
otables = [commands.globalopts]
if cmd:
aliases, entry = cmdutil.findcmd(cmd, commands.table, False)
otables.append(entry[1])
for t in otables:
for o in t:
if "(DEPRECATED)" in o[3]:
continue
if o[0]:
options.append('-%s' % o[0])
options.append('--%s' % o[1])
ui.write("%s\n" % "\n".join(options))
return
cmdlist, unused_allcmds = cmdutil.findpossible(cmd, commands.table)
if ui.verbose:
cmdlist = [' '.join(c[0]) for c in cmdlist.values()]
ui.write("%s\n" % "\n".join(sorted(cmdlist)))
@command('debugcreatestreamclonebundle', [], 'FILE')
def debugcreatestreamclonebundle(ui, repo, fname):
"""create a stream clone bundle file
Stream bundles are special bundles that are essentially archives of
revlog files. They are commonly used for cloning very quickly.
"""
requirements, gen = streamclone.generatebundlev1(repo)
changegroup.writechunks(ui, gen, fname)
ui.write(_('bundle requirements: %s\n') % ', '.join(sorted(requirements)))
@command('debugdag',
[('t', 'tags', None, _('use tags as labels')),
('b', 'branches', None, _('annotate with branch names')),
('', 'dots', None, _('use dots for runs')),
('s', 'spaces', None, _('separate elements by spaces'))],
_('[OPTION]... [FILE [REV]...]'),
optionalrepo=True)
def debugdag(ui, repo, file_=None, *revs, **opts):
"""format the changelog or an index DAG as a concise textual description
If you pass a revlog index, the revlog's DAG is emitted. If you list
revision numbers, they get labeled in the output as rN.
Otherwise, the changelog DAG of the current repo is emitted.
"""
spaces = opts.get('spaces')
dots = opts.get('dots')
if file_:
rlog = revlog.revlog(scmutil.opener(pycompat.getcwd(), audit=False),
file_)
revs = set((int(r) for r in revs))
def events():
for r in rlog:
yield 'n', (r, list(p for p in rlog.parentrevs(r)
if p != -1))
if r in revs:
yield 'l', (r, "r%i" % r)
elif repo:
cl = repo.changelog
tags = opts.get('tags')
branches = opts.get('branches')
if tags:
labels = {}
for l, n in repo.tags().items():
labels.setdefault(cl.rev(n), []).append(l)
def events():
b = "default"
for r in cl:
if branches:
newb = cl.read(cl.node(r))[5]['branch']
if newb != b:
yield 'a', newb
b = newb
yield 'n', (r, list(p for p in cl.parentrevs(r)
if p != -1))
if tags:
ls = labels.get(r)
if ls:
for l in ls:
yield 'l', (r, l)
else:
raise error.Abort(_('need repo for changelog dag'))
for line in dagparser.dagtextlines(events(),
addspaces=spaces,
wraplabels=True,
wrapannotations=True,
wrapnonlinear=dots,
usedots=dots,
maxlinewidth=70):
ui.write(line)
ui.write("\n")
@command('debugdata', commands.debugrevlogopts, _('-c|-m|FILE REV'))
def debugdata(ui, repo, file_, rev=None, **opts):
"""dump the contents of a data file revision"""
if opts.get('changelog') or opts.get('manifest') or opts.get('dir'):
if rev is not None:
raise error.CommandError('debugdata', _('invalid arguments'))
file_, rev = None, file_
elif rev is None:
raise error.CommandError('debugdata', _('invalid arguments'))
r = cmdutil.openrevlog(repo, 'debugdata', file_, opts)
try:
ui.write(r.revision(r.lookup(rev), raw=True))
except KeyError:
raise error.Abort(_('invalid revision identifier %s') % rev)
@command('debugdate',
[('e', 'extended', None, _('try extended date formats'))],
_('[-e] DATE [RANGE]'),
norepo=True, optionalrepo=True)
def debugdate(ui, date, range=None, **opts):
"""parse and display a date"""
if opts["extended"]:
d = util.parsedate(date, util.extendeddateformats)
else:
d = util.parsedate(date)
ui.write(("internal: %s %s\n") % d)
ui.write(("standard: %s\n") % util.datestr(d))
if range:
m = util.matchdate(range)
ui.write(("match: %s\n") % m(d[0]))
@command('debugdeltachain',
commands.debugrevlogopts + commands.formatteropts,
_('-c|-m|FILE'),
optionalrepo=True)
def debugdeltachain(ui, repo, file_=None, **opts):
"""dump information about delta chains in a revlog
Output can be templatized. Available template keywords are:
:``rev``: revision number
:``chainid``: delta chain identifier (numbered by unique base)
:``chainlen``: delta chain length to this revision
:``prevrev``: previous revision in delta chain
:``deltatype``: role of delta / how it was computed
:``compsize``: compressed size of revision
:``uncompsize``: uncompressed size of revision
:``chainsize``: total size of compressed revisions in chain
:``chainratio``: total chain size divided by uncompressed revision size
(new delta chains typically start at ratio 2.00)
:``lindist``: linear distance from base revision in delta chain to end
of this revision
:``extradist``: total size of revisions not part of this delta chain from
base of delta chain to end of this revision; a measurement
of how much extra data we need to read/seek across to read
the delta chain for this revision
:``extraratio``: extradist divided by chainsize; another representation of
how much unrelated data is needed to load this delta chain
"""
r = cmdutil.openrevlog(repo, 'debugdeltachain', file_, opts)
index = r.index
generaldelta = r.version & revlog.REVLOGGENERALDELTA
def revinfo(rev):
e = index[rev]
compsize = e[1]
uncompsize = e[2]
chainsize = 0
if generaldelta:
if e[3] == e[5]:
deltatype = 'p1'
elif e[3] == e[6]:
deltatype = 'p2'
elif e[3] == rev - 1:
deltatype = 'prev'
elif e[3] == rev:
deltatype = 'base'
else:
deltatype = 'other'
else:
if e[3] == rev:
deltatype = 'base'
else:
deltatype = 'prev'
chain = r._deltachain(rev)[0]
for iterrev in chain:
e = index[iterrev]
chainsize += e[1]
return compsize, uncompsize, deltatype, chain, chainsize
fm = ui.formatter('debugdeltachain', opts)
fm.plain(' rev chain# chainlen prev delta '
'size rawsize chainsize ratio lindist extradist '
'extraratio\n')
chainbases = {}
for rev in r:
comp, uncomp, deltatype, chain, chainsize = revinfo(rev)
chainbase = chain[0]
chainid = chainbases.setdefault(chainbase, len(chainbases) + 1)
basestart = r.start(chainbase)
revstart = r.start(rev)
lineardist = revstart + comp - basestart
extradist = lineardist - chainsize
try:
prevrev = chain[-2]
except IndexError:
prevrev = -1
chainratio = float(chainsize) / float(uncomp)
extraratio = float(extradist) / float(chainsize)
fm.startitem()
fm.write('rev chainid chainlen prevrev deltatype compsize '
'uncompsize chainsize chainratio lindist extradist '
'extraratio',
'%7d %7d %8d %8d %7s %10d %10d %10d %9.5f %9d %9d %10.5f\n',
rev, chainid, len(chain), prevrev, deltatype, comp,
uncomp, chainsize, chainratio, lineardist, extradist,
extraratio,
rev=rev, chainid=chainid, chainlen=len(chain),
prevrev=prevrev, deltatype=deltatype, compsize=comp,
uncompsize=uncomp, chainsize=chainsize,
chainratio=chainratio, lindist=lineardist,
extradist=extradist, extraratio=extraratio)
fm.end()
@command('debugdiscovery',
[('', 'old', None, _('use old-style discovery')),
('', 'nonheads', None,
_('use old-style discovery with non-heads included')),
] + commands.remoteopts,
_('[-l REV] [-r REV] [-b BRANCH]... [OTHER]'))
def debugdiscovery(ui, repo, remoteurl="default", **opts):
"""runs the changeset discovery protocol in isolation"""
remoteurl, branches = hg.parseurl(ui.expandpath(remoteurl),
opts.get('branch'))
remote = hg.peer(repo, opts, remoteurl)
ui.status(_('comparing with %s\n') % util.hidepassword(remoteurl))
# make sure tests are repeatable
random.seed(12323)
def doit(localheads, remoteheads, remote=remote):
if opts.get('old'):
if localheads:
raise error.Abort('cannot use localheads with old style '
'discovery')
if not util.safehasattr(remote, 'branches'):
# enable in-client legacy support
remote = localrepo.locallegacypeer(remote.local())
common, _in, hds = treediscovery.findcommonincoming(repo, remote,
force=True)
common = set(common)
if not opts.get('nonheads'):
ui.write(("unpruned common: %s\n") %
" ".join(sorted(short(n) for n in common)))
dag = dagutil.revlogdag(repo.changelog)
all = dag.ancestorset(dag.internalizeall(common))
common = dag.externalizeall(dag.headsetofconnecteds(all))
else:
common, any, hds = setdiscovery.findcommonheads(ui, repo, remote)
common = set(common)
rheads = set(hds)
lheads = set(repo.heads())
ui.write(("common heads: %s\n") %
" ".join(sorted(short(n) for n in common)))
if lheads <= common:
ui.write(("local is subset\n"))
elif rheads <= common:
ui.write(("remote is subset\n"))
serverlogs = opts.get('serverlog')
if serverlogs:
for filename in serverlogs:
with open(filename, 'r') as logfile:
line = logfile.readline()
while line:
parts = line.strip().split(';')
op = parts[1]
if op == 'cg':
pass
elif op == 'cgss':
doit(parts[2].split(' '), parts[3].split(' '))
elif op == 'unb':
doit(parts[3].split(' '), parts[2].split(' '))
line = logfile.readline()
else:
remoterevs, _checkout = hg.addbranchrevs(repo, remote, branches,
opts.get('remote_head'))
localrevs = opts.get('local_head')
doit(localrevs, remoterevs)
@command('debugextensions', commands.formatteropts, [], norepo=True)
def debugextensions(ui, **opts):
'''show information about active extensions'''
exts = extensions.extensions(ui)
hgver = util.version()
fm = ui.formatter('debugextensions', opts)
for extname, extmod in sorted(exts, key=operator.itemgetter(0)):
isinternal = extensions.ismoduleinternal(extmod)
extsource = extmod.__file__
if isinternal:
exttestedwith = [] # never expose magic string to users
else:
exttestedwith = getattr(extmod, 'testedwith', '').split()
extbuglink = getattr(extmod, 'buglink', None)
fm.startitem()
if ui.quiet or ui.verbose:
fm.write('name', '%s\n', extname)
else:
fm.write('name', '%s', extname)
if isinternal or hgver in exttestedwith:
fm.plain('\n')
elif not exttestedwith:
fm.plain(_(' (untested!)\n'))
else:
lasttestedversion = exttestedwith[-1]
fm.plain(' (%s!)\n' % lasttestedversion)
fm.condwrite(ui.verbose and extsource, 'source',
_(' location: %s\n'), extsource or "")
if ui.verbose:
fm.plain(_(' bundled: %s\n') % ['no', 'yes'][isinternal])
fm.data(bundled=isinternal)
fm.condwrite(ui.verbose and exttestedwith, 'testedwith',
_(' tested with: %s\n'),
fm.formatlist(exttestedwith, name='ver'))
fm.condwrite(ui.verbose and extbuglink, 'buglink',
_(' bug reporting: %s\n'), extbuglink or "")
fm.end()
@command('debugfileset',
[('r', 'rev', '', _('apply the filespec on this revision'), _('REV'))],
_('[-r REV] FILESPEC'))
def debugfileset(ui, repo, expr, **opts):
'''parse and apply a fileset specification'''
ctx = scmutil.revsingle(repo, opts.get('rev'), None)
if ui.verbose:
tree = fileset.parse(expr)
ui.note(fileset.prettyformat(tree), "\n")
for f in ctx.getfileset(expr):
ui.write("%s\n" % f)
@command('debugfsinfo', [], _('[PATH]'), norepo=True)
def debugfsinfo(ui, path="."):
"""show information detected about current filesystem"""
util.writefile('.debugfsinfo', '')
ui.write(('exec: %s\n') % (util.checkexec(path) and 'yes' or 'no'))
ui.write(('symlink: %s\n') % (util.checklink(path) and 'yes' or 'no'))
ui.write(('hardlink: %s\n') % (util.checknlink(path) and 'yes' or 'no'))
ui.write(('case-sensitive: %s\n') % (util.fscasesensitive('.debugfsinfo')
and 'yes' or 'no'))
os.unlink('.debugfsinfo')
@command('debuggetbundle',
[('H', 'head', [], _('id of head node'), _('ID')),
('C', 'common', [], _('id of common node'), _('ID')),
('t', 'type', 'bzip2', _('bundle compression type to use'), _('TYPE'))],
_('REPO FILE [-H|-C ID]...'),
norepo=True)
def debuggetbundle(ui, repopath, bundlepath, head=None, common=None, **opts):
"""retrieves a bundle from a repo
Every ID must be a full-length hex node id string. Saves the bundle to the
given file.
"""
repo = hg.peer(ui, opts, repopath)
if not repo.capable('getbundle'):
raise error.Abort("getbundle() not supported by target repository")
args = {}
if common:
args['common'] = [bin(s) for s in common]
if head:
args['heads'] = [bin(s) for s in head]
# TODO: get desired bundlecaps from command line.
args['bundlecaps'] = None
bundle = repo.getbundle('debug', **args)
bundletype = opts.get('type', 'bzip2').lower()
btypes = {'none': 'HG10UN',
'bzip2': 'HG10BZ',
'gzip': 'HG10GZ',
'bundle2': 'HG20'}
bundletype = btypes.get(bundletype)
if bundletype not in bundle2.bundletypes:
raise error.Abort(_('unknown bundle type specified with --type'))
bundle2.writebundle(ui, bundle, bundlepath, bundletype)
@command('debugignore', [], '[FILE]')
def debugignore(ui, repo, *files, **opts):
"""display the combined ignore pattern and information about ignored files
With no argument display the combined ignore pattern.
Given space separated file names, shows if the given file is ignored and
if so, show the ignore rule (file and line number) that matched it.
"""
ignore = repo.dirstate._ignore
if not files:
# Show all the patterns
includepat = getattr(ignore, 'includepat', None)
if includepat is not None:
ui.write("%s\n" % includepat)
else:
raise error.Abort(_("no ignore patterns found"))
else:
for f in files:
nf = util.normpath(f)
ignored = None
ignoredata = None
if nf != '.':
if ignore(nf):
ignored = nf
ignoredata = repo.dirstate._ignorefileandline(nf)
else:
for p in util.finddirs(nf):
if ignore(p):
ignored = p
ignoredata = repo.dirstate._ignorefileandline(p)
break
if ignored:
if ignored == nf:
ui.write(_("%s is ignored\n") % f)
else:
ui.write(_("%s is ignored because of "
"containing folder %s\n")
% (f, ignored))
ignorefile, lineno, line = ignoredata
ui.write(_("(ignore rule in %s, line %d: '%s')\n")
% (ignorefile, lineno, line))
else:
ui.write(_("%s is not ignored\n") % f)
@command('debugindex', commands.debugrevlogopts +
[('f', 'format', 0, _('revlog format'), _('FORMAT'))],
_('[-f FORMAT] -c|-m|FILE'),
optionalrepo=True)
def debugindex(ui, repo, file_=None, **opts):
"""dump the contents of an index file"""
r = cmdutil.openrevlog(repo, 'debugindex', file_, opts)
format = opts.get('format', 0)
if format not in (0, 1):
raise error.Abort(_("unknown format %d") % format)
generaldelta = r.version & revlog.REVLOGGENERALDELTA
if generaldelta:
basehdr = ' delta'
else:
basehdr = ' base'
if ui.debugflag:
shortfn = hex
else:
shortfn = short
# There might not be anything in r, so have a sane default
idlen = 12
for i in r:
idlen = len(shortfn(r.node(i)))
break
if format == 0:
ui.write((" rev offset length " + basehdr + " linkrev"
" %s %s p2\n") % ("nodeid".ljust(idlen), "p1".ljust(idlen)))
elif format == 1:
ui.write((" rev flag offset length"
" size " + basehdr + " link p1 p2"
" %s\n") % "nodeid".rjust(idlen))
for i in r:
node = r.node(i)
if generaldelta:
base = r.deltaparent(i)
else:
base = r.chainbase(i)
if format == 0:
try:
pp = r.parents(node)
except Exception:
pp = [nullid, nullid]
ui.write("% 6d % 9d % 7d % 6d % 7d %s %s %s\n" % (
i, r.start(i), r.length(i), base, r.linkrev(i),
shortfn(node), shortfn(pp[0]), shortfn(pp[1])))
elif format == 1:
pr = r.parentrevs(i)
ui.write("% 6d %04x % 8d % 8d % 8d % 6d % 6d % 6d % 6d %s\n" % (
i, r.flags(i), r.start(i), r.length(i), r.rawsize(i),
base, r.linkrev(i), pr[0], pr[1], shortfn(node)))
@command('debugindexdot', commands.debugrevlogopts,
_('-c|-m|FILE'), optionalrepo=True)
def debugindexdot(ui, repo, file_=None, **opts):
"""dump an index DAG as a graphviz dot file"""
r = cmdutil.openrevlog(repo, 'debugindexdot', file_, opts)
ui.write(("digraph G {\n"))
for i in r:
node = r.node(i)
pp = r.parents(node)
ui.write("\t%d -> %d\n" % (r.rev(pp[0]), i))
if pp[1] != nullid:
ui.write("\t%d -> %d\n" % (r.rev(pp[1]), i))
ui.write("}\n")
@command('debugupgraderepo', [
('o', 'optimize', [], _('extra optimization to perform'), _('NAME')),
('', 'run', False, _('performs an upgrade')),
])
def debugupgraderepo(ui, repo, run=False, optimize=None):
"""upgrade a repository to use different features
If no arguments are specified, the repository is evaluated for upgrade
and a list of problems and potential optimizations is printed.
With ``--run``, a repository upgrade is performed. Behavior of the upgrade
can be influenced via additional arguments. More details will be provided
by the command output when run without ``--run``.
During the upgrade, the repository will be locked and no writes will be
allowed.
At the end of the upgrade, the repository may not be readable while new
repository data is swapped in. This window will be as long as it takes to
rename some directories inside the ``.hg`` directory. On most machines, this
should complete almost instantaneously and the chances of a consumer being
unable to access the repository should be low.
"""
return repair.upgraderepo(ui, repo, run=run, optimize=optimize)