view tests/test-progress.t @ 28103:7d852bb47b0a

merge: give priority to "not at head" failures for bare 'hg merge'

We refuse to pick a destination for a bare 'hg merge' if the working copy is not
at head. This is meant to prevent strange merge from user who forget to update.
(Moreover, such merge does not reduce actually the number of heads)

However, we were doing that as the last possible failure type. So user were
recommended to merge with an explicit head (from this bad location) if the
branch had too many heads.

We now make "not on branch heads" class of failure the first things to check
and fail on. The one test that change was actually trying to check for these
failure (and did not). The new test output is correct.

  $ cat > loop.py <<EOF
  > from mercurial import cmdutil, commands
  > import time
  > 
  > cmdtable = {}
  > command = cmdutil.command(cmdtable)
  > 
  > class incrementingtime(object):
  >     def __init__(self):
  >         self._time = 0.0
  >     def __call__(self):
  >         self._time += 0.25
  >         return self._time
  > time.time = incrementingtime()
  > 
  > @command('loop',
  >     [('', 'total', '', 'override for total'),
  >     ('', 'nested', False, 'show nested results'),
  >     ('', 'parallel', False, 'show parallel sets of results')],
  >     'hg loop LOOPS',
  >     norepo=True)
  > def loop(ui, loops, **opts):
  >     loops = int(loops)
  >     total = None
  >     if loops >= 0:
  >         total = loops
  >     if opts.get('total', None):
  >         total = int(opts.get('total'))
  >     nested = False
  >     if opts.get('nested', None):
  >         nested = True
  >     loops = abs(loops)
  > 
  >     for i in range(loops):
  >         ui.progress(topiclabel, i, getloopitem(i), 'loopnum', total)
  >         if opts.get('parallel'):
  >             ui.progress('other', i, 'other.%d' % i, 'othernum', total)
  >         if nested:
  >             nested_steps = 2
  >             if i and i % 4 == 0:
  >                 nested_steps = 5
  >             for j in range(nested_steps):
  >                 ui.progress(
  >                   'nested', j, 'nested.%d' % j, 'nestnum', nested_steps)
  >             ui.progress(
  >               'nested', None, 'nested.done', 'nestnum', nested_steps)
  >     ui.progress(topiclabel, None, 'loop.done', 'loopnum', total)
  > 
  > topiclabel = 'loop'
  > def getloopitem(i):
  >     return 'loop.%d' % i
  > 
  > EOF

  $ cp $HGRCPATH $HGRCPATH.orig
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "format = topic bar number" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

test default params, display nothing because of delay

  $ hg -y loop 3
  $ echo "delay=0" >> $HGRCPATH
  $ echo "refresh=0" >> $HGRCPATH

test with delay=0, refresh=0

  $ hg -y loop 3
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
no progress with --quiet
  $ hg -y loop 3 --quiet

test nested short-lived topics (which shouldn't display with nestdelay):

  $ hg -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Test nested long-lived topic which has the same name as a short-lived
peer. We shouldn't get stuck showing the short-lived inner steps, and
should go back to skipping the inner steps when the slow nested step
finishes.

  $ hg -y loop 7 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/7\r (no-eol) (esc)
  loop [=====>                                          ] 1/7\r (no-eol) (esc)
  loop [============>                                   ] 2/7\r (no-eol) (esc)
  loop [===================>                            ] 3/7\r (no-eol) (esc)
  loop [==========================>                     ] 4/7\r (no-eol) (esc)
  nested [==========================>                   ] 3/5\r (no-eol) (esc)
  nested [===================================>          ] 4/5\r (no-eol) (esc)
  loop [=================================>              ] 5/7\r (no-eol) (esc)
  loop [========================================>       ] 6/7\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ hg --config progress.changedelay=0 -y loop 3 --nested
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
  nested [                                              ] 0/2\r (no-eol) (esc)
  nested [======================>                       ] 1/2\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


test two topics being printed in parallel (as when we're doing a local
--pull clone, where you get the unbundle and bundle progress at the
same time):
  $ hg loop 3 --parallel
  \r (no-eol) (esc)
  loop [                                                ] 0/3\r (no-eol) (esc)
  loop [===============>                                ] 1/3\r (no-eol) (esc)
  loop [===============================>                ] 2/3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)
test refresh is taken in account

  $ hg -y --config progress.refresh=100 loop 3

test format options 1

  $ hg -y --config 'progress.format=number topic item+2' loop 2
  \r (no-eol) (esc)
  0/2 loop lo\r (no-eol) (esc)
  1/2 loop lo\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options 2

  $ hg -y --config 'progress.format=number item-3 bar' loop 2
  \r (no-eol) (esc)
  0/2 p.0 [                                                 ]\r (no-eol) (esc)
  1/2 p.1 [=======================>                         ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test format options and indeterminate progress

  $ hg -y --config 'progress.format=number item bar' loop -- -2
  \r (no-eol) (esc)
  0 loop.0               [ <=>                              ]\r (no-eol) (esc)
  1 loop.1               [  <=>                             ]\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

make sure things don't fall over if count > total

  $ hg -y loop --total 4 6
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [===========>                                    ] 1/4\r (no-eol) (esc)
  loop [=======================>                        ] 2/4\r (no-eol) (esc)
  loop [===================================>            ] 3/4\r (no-eol) (esc)
  loop [===============================================>] 4/4\r (no-eol) (esc)
  loop [ <=>                                            ] 5/4\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test immediate progress completion

  $ hg -y loop 0

test delay time estimates

  $ cat > mocktime.py <<EOF
  > import os
  > import time
  > 
  > class mocktime(object):
  >     def __init__(self, increment):
  >         self.time = 0
  >         self.increment = increment
  >     def __call__(self):
  >         self.time += self.increment
  >         return self.time
  > 
  > def uisetup(ui):
  >     time.time = mocktime(int(os.environ.get('MOCKTIME', '11')))
  > EOF

  $ cp $HGRCPATH.orig $HGRCPATH
  $ echo "[extensions]" >> $HGRCPATH
  $ echo "mocktime=`pwd`/mocktime.py" >> $HGRCPATH
  $ echo "progress=" >> $HGRCPATH
  $ echo "loop=`pwd`/loop.py" >> $HGRCPATH
  $ echo "[progress]" >> $HGRCPATH
  $ echo "assume-tty=1" >> $HGRCPATH
  $ echo "delay=25" >> $HGRCPATH
  $ echo "width=60" >> $HGRCPATH

  $ hg -y loop 8
  \r (no-eol) (esc)
  loop [=========>                                ] 2/8 1m07s\r (no-eol) (esc)
  loop [===============>                            ] 3/8 56s\r (no-eol) (esc)
  loop [=====================>                      ] 4/8 45s\r (no-eol) (esc)
  loop [==========================>                 ] 5/8 34s\r (no-eol) (esc)
  loop [================================>           ] 6/8 23s\r (no-eol) (esc)
  loop [=====================================>      ] 7/8 12s\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=10000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 8h21m\r (no-eol) (esc)
  loop [====================>                     ] 2/4 5h34m\r (no-eol) (esc)
  loop [==============================>           ] 3/4 2h47m\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

  $ MOCKTIME=1000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 5w00d\r (no-eol) (esc)
  loop [====================>                     ] 2/4 3w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 11d14h\r (no-eol) (esc)
                                                              \r (no-eol) (esc)


  $ MOCKTIME=14000000 hg -y loop 4
  \r (no-eol) (esc)
  loop [                                                ] 0/4\r (no-eol) (esc)
  loop [=========>                                ] 1/4 1y18w\r (no-eol) (esc)
  loop [===================>                     ] 2/4 46w03d\r (no-eol) (esc)
  loop [=============================>           ] 3/4 23w02d\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

Time estimates should not fail when there's no end point:
  $ hg -y loop -- -4
  \r (no-eol) (esc)
  loop [ <=>                                              ] 2\r (no-eol) (esc)
  loop [  <=>                                             ] 3\r (no-eol) (esc)
                                                              \r (no-eol) (esc)

test line trimming by '[progress] width', when progress topic contains
multi-byte characters, of which length of byte sequence and columns in
display are different from each other.

  $ cp $HGRCPATH.orig $HGRCPATH
  $ cat >> $HGRCPATH <<EOF
  > [extensions]
  > progress=
  > loop=`pwd`/loop.py
  > [progress]
  > assume-tty = 1
  > delay = 0
  > refresh = 0
  > EOF

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as topic label of progress
  > # 2 x 4 = 8 columns, but 3 x 4 = 12 bytes
  > topiclabel = u'\u3042\u3044\u3046\u3048'.encode('utf-8')
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic number
  > width= 12
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 0/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 1/3\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 2/3\r (no-eol) (esc)
              \r (no-eol) (esc)

test calculation of bar width, when progress topic contains multi-byte
characters, of which length of byte sequence and columns in display
are different from each other.

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > format = topic bar
  > width= 21
  > # progwidth should be 9 (= 21 - (8+1) - 3)
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [         ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [==>      ]\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\xe3\x81\x88 [=====>   ]\r (no-eol) (esc)
                       \r (no-eol) (esc)

test trimming progress items, when they contain multi-byte characters,
of which length of byte sequence and columns in display are different
from each other.

  $ rm -f loop.pyc
  $ cat >> loop.py <<EOF
  > # use non-ascii characters as loop items of progress
  > loopitems = [
  >     u'\u3042\u3044'.encode('utf-8'), # 2 x 2 = 4 columns
  >     u'\u3042\u3044\u3046'.encode('utf-8'), # 2 x 3 = 6 columns
  >     u'\u3042\u3044\u3046\u3048'.encode('utf-8'), # 2 x 4 = 8 columns
  > ]
  > def getloopitem(i):
  >     return loopitems[i % len(loopitems)]
  > EOF

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at tail side
  > format = item+6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
                       \r (no-eol) (esc)

  $ cat >> $HGRCPATH <<EOF
  > [progress]
  > # trim at left side
  > format = item-6
  > EOF

  $ hg --encoding utf-8 -y loop --total 3 3
  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84  \r (no-eol) (esc)
  \xe3\x81\x82\xe3\x81\x84\xe3\x81\x86\r (no-eol) (esc)
  \xe3\x81\x84\xe3\x81\x86\xe3\x81\x88\r (no-eol) (esc)
                       \r (no-eol) (esc)