phases: change publish behavior to only alter behavior when server.
Older publish=True was:
1) Content of Publishing server are seen as public by client.
2) Any changegroup *added* to a publish=True server is public.
New definition are:
1) Content of Publishing server are seen as public by client.
2) Any changegroup *pushed* to a publish=True server is public.
See mercurial/phase.py documentation for exact final behavior
""" Mercurial phases support code
---
Copyright 2011 Pierre-Yves David <pierre-yves.david@ens-lyon.org>
Logilab SA <contact@logilab.fr>
Augie Fackler <durin42@gmail.com>
This software may be used and distributed according to the terms of the
GNU General Public License version 2 or any later version.
---
This module implements most phase logic in mercurial.
Basic Concept
=============
A 'changeset phases' is an indicator that tells us how a changeset is
manipulated and communicated. The details of each phase is described below,
here we describe the properties they have in common.
Like bookmarks, phases are not stored in history and thus are not permanent and
leave no audit trail.
First, no changeset can be in two phases at once. Phases are ordered, so they
can be considered from lowest to highest. The default, lowest phase is 'public'
- this is the normal phase of existing changesets. A child changeset can not be
in a lower phase than its parents.
These phases share a hierarchy of traits:
immutable shared
public: X X
draft: X
local commits are draft by default
Phase movement and exchange
============================
Phase data are exchanged by pushkey on pull and push. Some server have a
publish option set, we call them publishing server. Pushing to such server make
draft changeset publish.
A small list of fact/rules define the exchange of phase:
* old client never changes server states
* pull never changes server states
* publish and old server csets are seen as public by client
Here is the final table summing up the 49 possible usecase of phase exchange:
server
old publish non-publish
N X N D P N D P
old client
pull
N - X/X - X/D X/P - X/D X/P
X - X/X - X/D X/P - X/D X/P
push
X X/X X/X X/P X/P X/P X/D X/D X/P
new client
pull
N - P/X - P/D P/P - D/D P/P
D - P/X - P/D P/P - D/D P/P
P - P/X - P/D P/P - P/D P/P
push
D P/X P/X P/P P/P P/P D/D D/D P/P
P P/X P/X P/P P/P P/P P/P P/P P/P
Legend:
A/B = final state on client / state on server
* N = new/not present,
* P = public,
* D = draft,
* X = not tracked (ie: the old client or server has no internal way of
recording the phase.)
passive = only pushes
A cell here can be read like this:
"When a new client pushes a draft changeset (D) to a publishing server
where it's not present (N), it's marked public on both sides (P/P)."
Note: old client behave as publish server with Draft only content
- other people see it as public
- content is pushed as draft
"""
import errno
from node import nullid, bin, hex, short
from i18n import _
allphases = range(2)
trackedphases = allphases[1:]
def readroots(repo):
"""Read phase roots from disk"""
roots = [set() for i in allphases]
roots[0].add(nullid)
try:
f = repo.sopener('phaseroots')
try:
for line in f:
phase, nh = line.strip().split()
roots[int(phase)].add(bin(nh))
finally:
f.close()
except IOError, inst:
if inst.errno != errno.ENOENT:
raise
return roots
def writeroots(repo):
"""Write phase roots from disk"""
f = repo.sopener('phaseroots', 'w', atomictemp=True)
try:
for phase, roots in enumerate(repo._phaseroots):
for h in roots:
f.write('%i %s\n' % (phase, hex(h)))
repo._dirtyphases = False
finally:
f.close()
def filterunknown(repo, phaseroots=None):
"""remove unknown nodes from the phase boundary
no data is lost as unknown node only old data for their descentants
"""
if phaseroots is None:
phaseroots = repo._phaseroots
for phase, nodes in enumerate(phaseroots):
missing = [node for node in nodes if node not in repo]
if missing:
for mnode in missing:
msg = _('Removing unknown node %(n)s from %(p)i-phase boundary')
repo.ui.debug(msg, {'n': short(mnode), 'p': phase})
nodes.symmetric_difference_update(missing)
repo._dirtyphases = True
def advanceboundary(repo, targetphase, nodes):
"""Add nodes to a phase changing other nodes phases if necessary.
This function move boundary *forward* this means that all nodes are set
in the target phase or kept in a *lower* phase.
Simplify boundary to contains phase roots only."""
for phase in xrange(targetphase + 1, len(allphases)):
# filter nodes that are not in a compatible phase already
# XXX rev phase cache might have been invalidated by a previous loop
# XXX we need to be smarter here
nodes = [n for n in nodes if repo[n].phase() >= phase]
if not nodes:
break # no roots to move anymore
roots = repo._phaseroots[phase]
olds = roots.copy()
ctxs = list(repo.set('roots((%ln::) - (%ln::%ln))', olds, olds, nodes))
roots.clear()
roots.update(ctx.node() for ctx in ctxs)
if olds != roots:
# invalidate cache (we probably could be smarter here
if '_phaserev' in vars(repo):
del repo._phaserev
repo._dirtyphases = True
def retractboundary(repo, targetphase, nodes):
"""Set nodes back to a phase changing other nodes phases if necessary.
This function move boundary *backward* this means that all nodes are set
in the target phase or kept in a *higher* phase.
Simplify boundary to contains phase roots only."""
currentroots = repo._phaseroots[targetphase]
newroots = [n for n in nodes if repo[n].phase() < targetphase]
if newroots:
currentroots.update(newroots)
ctxs = repo.set('roots(%ln::)', currentroots)
currentroots.intersection_update(ctx.node() for ctx in ctxs)
if '_phaserev' in vars(repo):
del repo._phaserev
repo._dirtyphases = True
def listphases(repo):
"""List phases root for serialisation over pushkey"""
keys = {}
for phase in trackedphases:
for root in repo._phaseroots[phase]:
keys[hex(root)] = '%i' % phase
if repo.ui.configbool('phases', 'publish', True):
# Add an extra data to let remote know we are a publishing repo.
# Publishing repo can't just pretend they are old repo. When pushing to
# a publishing repo, the client still need to push phase boundary
#
# Push do not only push changeset. It also push phase data. New
# phase data may apply to common changeset which won't be push (as they
# are common). Here is a very simple example:
#
# 1) repo A push changeset X as draft to repo B
# 2) repo B make changeset X public
# 3) repo B push to repo A. X is not pushed but the data that X as now
# public should
#
# The server can't handle it on it's own as it has no idea of client
# phase data.
keys['publishing'] = 'True'
return keys
def pushphase(repo, nhex, oldphasestr, newphasestr):
"""List phases root for serialisation over pushkey"""
lock = repo.lock()
try:
currentphase = repo[nhex].phase()
newphase = abs(int(newphasestr)) # let's avoid negative index surprise
oldphase = abs(int(oldphasestr)) # let's avoid negative index surprise
if currentphase == oldphase and newphase < oldphase:
advanceboundary(repo, newphase, [bin(nhex)])
return 1
else:
return 0
finally:
lock.release()
def analyzeremotephases(repo, subset, roots):
"""Compute phases heads and root in a subset of node from root dict
* subset is heads of the subset
* roots is {<nodeid> => phase} mapping. key and value are string.
Accept unknown element input
"""
# build list from dictionary
phaseroots = [[] for p in allphases]
for nhex, phase in roots.iteritems():
if nhex == 'publishing': # ignore data related to publish option
continue
node = bin(nhex)
phase = int(phase)
if node in repo:
phaseroots[phase].append(node)
# compute heads
phaseheads = [[] for p in allphases]
for phase in allphases[:-1]:
toproof = phaseroots[phase + 1]
revset = repo.set('heads((%ln + parents(%ln)) - (%ln::%ln))',
subset, toproof, toproof, subset)
phaseheads[phase].extend(c.node() for c in revset)
return phaseheads, phaseroots