view doc/check-seclevel.py @ 50338:81c7d04f4722 stable

match: match explicit file using a set The matcher as all the logic to do quick comparison against explicit patterns, however the pattern matcher was shadowing the code using that set and used the compiled regex pattern in all cases, which is quite slow. We restore the usage of the set based matching to boost performance. Building the regexp is still consuming a large amount of time (actually, the majority of the time), which is still silly. Maybe using re2 would help that, but this is a quest for another adventure. Another path to improve this is to have a pattern type dedicated to match the exact path to a file only (not a directory). This pattern could use the set matching only and be skipped in the regex all together. Benchmarks ========== In the following benchmark we are comparing the `hg cat` and `hg files` run time when matching against all files in the repository. They are run: - without the rust extensions - with the standard python engine (so without re2) Performance improvement in this series -------------------------------------- ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.230092 seconds prev-changeset: 0.230069 seconds this-changeset: 0.211425 seconds (-8.36%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.234235 seconds prev-changeset: 0.231165 seconds (-1.38%) this-changeset: 0.212300 seconds (-9.43%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.613567 seconds prev-changeset: 0.616799 seconds this-changeset: 0.510852 seconds (-16.82%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.801880 seconds prev-changeset: 0.616393 seconds (-23.22%) this-changeset: 0.511903 seconds (-36.23%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 21.541828 seconds prev-changeset: 21.586773 seconds this-changeset: 13.648347 seconds (-36.76%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 172.759857 seconds prev-changeset: 21.908197 seconds (-87.32%) this-changeset: 13.945110 seconds (-91.93%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 62.474221 seconds prev-changeset: 61.279490 seconds (-1.22%) this-changeset: 29.529469 seconds (-52.40%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1364.180218 seconds prev-changeset: 62.473549 seconds (-95.40%) this-changeset: 30.625249 seconds (-97.75%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 0.764407 seconds prev-changeset: 0.763883 seconds this-changeset: 0.737326 seconds (-3.68%) ### mercurial-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 0.768924 seconds prev-changeset: 0.765848 seconds this-changeset: 0.174d0b seconds (-4.44%) ### pypy-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 2.065220 seconds prev-changeset: 2.070498 seconds this-changeset: 1.939482 seconds (-6.08%) ### pypy-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 2.276388 seconds prev-changeset: 2.069197 seconds (-9.15%) this-changeset: 1.931746 seconds (-15.19%) ### netbeans-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 40.967983 seconds prev-changeset: 41.392423 seconds this-changeset: 32.181681 seconds (-22.20%) ### netbeans-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 216.388709 seconds prev-changeset: 41.648689 seconds (-80.88%) this-changeset: 32.580817 seconds (-85.04%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### sorted base-changeset: 105.228510 seconds prev-changeset: 103.315670 seconds (-1.23%) this-changeset: 69.416118 seconds (-33.64%) ### mozilla-central-2018-08-01-zstd-sparse-revlog ### shuffled base-changeset: 1448.722784 seconds prev-changeset: 104.369358 seconds (-92.80%) this-changeset: 70.554789 seconds (-95.13%) Different way to list the same data with this revision ------------------------------------------------------ ###### hg files ############################################################### ### mercurial-2018-08-01-zstd-sparse-revlog root: 0.119182 seconds glob: 0.120697 seconds (+1.27%) sorted: 0.211425 seconds (+77.40%) shuffled: 0.212300 seconds (+78.13%) ### pypy-2018-08-01-zstd-sparse-revlog root: 0.121986 seconds glob: 0.124822 seconds (+2.32%) sorted: 0.510852 seconds (+318.78%) shuffled: 0.511903 seconds (+319.64%) ### netbeans-2018-08-01-zstd-sparse-revlog root: 0.173984 seconds glob: 0.227203 seconds (+30.59%) sorted: 13.648347 seconds (+7744.59%) shuffled: 13.945110 seconds (+7915.16%) ### mozilla-central-2018-08-01-zstd-sparse-revlog root: 0.366463 seconds glob: 0.491030 seconds (+33.99%) sorted: 29.529469 seconds (+7957.96%) shuffled: 30.625249 seconds (+8256.97%) ###### hg cat ################################################################# ### mercurial-2018-08-01-zstd-sparse-revlog glob: 0.647471 seconds root: 0.643120 seconds shuffled: 0.174d0b seconds (+13.92%) sorted: 0.737326 seconds (+13.88%) ### mozilla-central-2018-08-01-zstd-sparse-revlog glob: 40.596983 seconds root: 40.129136 seconds shuffled: 70.554789 seconds (+73.79%) sorted: 69.416118 seconds (+70.99%) ### netbeans-2018-08-01-zstd-sparse-revlog glob: 18.777924 seconds root: 18.613905 seconds shuffled: 32.580817 seconds (+73.51%) sorted: 32.181681 seconds (+71.38%) ### pypy-2018-08-01-zstd-sparse-revlog glob: 1.555319 seconds root: 1.536534 seconds shuffled: 1.931746 seconds (+24.20%) sorted: 1.939482 seconds (+24.70%)
author Pierre-Yves David <pierre-yves.david@octobus.net>
date Sat, 01 Apr 2023 05:58:59 +0200
parents 98e7be1ed6c5
children
line wrap: on
line source

#!/usr/bin/env python3
#
# checkseclevel - checking section title levels in each online help document


import optparse
import os
import sys

# import from the live mercurial repo
os.environ['HGMODULEPOLICY'] = 'py'
sys.path.insert(0, os.path.abspath(".."))
from mercurial import demandimport

demandimport.enable()
from mercurial import (
    commands,
    extensions,
    help,
    minirst,
    ui as uimod,
)

table = commands.table
helptable = help.helptable

level2mark = [b'"', b'=', b'-', b'.', b'#']
reservedmarks = [b'"']

mark2level = {}
for m, l in zip(level2mark, range(len(level2mark))):
    if m not in reservedmarks:
        mark2level[m] = l

initlevel_topic = 0
initlevel_cmd = 1
initlevel_ext = 1
initlevel_ext_cmd = 3


def showavailables(ui, initlevel):
    avail = '    available marks and order of them in this help: %s\n' % (
        ', '.join(['%r' % (m * 4) for m in level2mark[initlevel + 1 :]])
    )
    ui.warn(avail.encode('utf-8'))


def checkseclevel(ui, doc, name, initlevel):
    ui.notenoi18n(('checking "%s"\n' % name).encode('utf-8'))
    if not isinstance(doc, bytes):
        doc = doc.encode('utf-8')
    blocks, pruned = minirst.parse(doc, 0, ['verbose'])
    errorcnt = 0
    curlevel = initlevel
    for block in blocks:
        if block[b'type'] != b'section':
            continue
        mark = block[b'underline']
        title = block[b'lines'][0]
        if (mark not in mark2level) or (mark2level[mark] <= initlevel):
            ui.warn(
                (
                    'invalid section mark %r for "%s" of %s\n'
                    % (mark * 4, title, name)
                ).encode('utf-8')
            )
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        nextlevel = mark2level[mark]
        if curlevel < nextlevel and curlevel + 1 != nextlevel:
            ui.warnnoi18n(
                ('gap of section level at "%s" of %s\n' % (title, name)).encode(
                    'utf-8'
                )
            )
            showavailables(ui, initlevel)
            errorcnt += 1
            continue
        ui.notenoi18n(
            (
                'appropriate section level for "%s %s"\n'
                % (mark * (nextlevel * 2), title)
            ).encode('utf-8')
        )
        curlevel = nextlevel

    return errorcnt


def checkcmdtable(ui, cmdtable, namefmt, initlevel):
    errorcnt = 0
    for k, entry in cmdtable.items():
        name = k.split(b"|")[0].lstrip(b"^")
        if not entry[0].__doc__:
            ui.notenoi18n(
                (
                    'skip checking %s: no help document\n' % (namefmt % name)
                ).encode('utf-8')
            )
            continue
        errorcnt += checkseclevel(
            ui, entry[0].__doc__, namefmt % name, initlevel
        )
    return errorcnt


def checkhghelps(ui):
    errorcnt = 0
    for h in helptable:
        names, sec, doc = h[0:3]
        if callable(doc):
            doc = doc(ui)
        errorcnt += checkseclevel(
            ui, doc, '%s help topic' % names[0], initlevel_topic
        )

    errorcnt += checkcmdtable(ui, table, '%s command', initlevel_cmd)

    for name in sorted(
        list(extensions.enabled()) + list(extensions.disabled())
    ):
        mod = extensions.load(ui, name, None)
        if not mod.__doc__:
            ui.notenoi18n(
                (
                    'skip checking %s extension: no help document\n' % name
                ).encode('utf-8')
            )
            continue
        errorcnt += checkseclevel(
            ui, mod.__doc__, '%s extension' % name, initlevel_ext
        )

        cmdtable = getattr(mod, 'cmdtable', None)
        if cmdtable:
            errorcnt += checkcmdtable(
                ui,
                cmdtable,
                '%%s command of %s extension' % name,
                initlevel_ext_cmd,
            )
    return errorcnt


def checkfile(ui, filename, initlevel):
    if filename == '-':
        filename = 'stdin'
        doc = sys.stdin.read()
    else:
        with open(filename) as fp:
            doc = fp.read()

    ui.notenoi18n(
        (
            'checking input from %s with initlevel %d\n' % (filename, initlevel)
        ).encode('utf-8')
    )
    return checkseclevel(ui, doc, 'input from %s' % filename, initlevel)


def main():
    optparser = optparse.OptionParser(
        """%prog [options]

This checks all help documents of Mercurial (topics, commands,
extensions and commands of them), if no file is specified by --file
option.
"""
    )
    optparser.add_option(
        "-v", "--verbose", help="enable additional output", action="store_true"
    )
    optparser.add_option(
        "-d", "--debug", help="debug mode", action="store_true"
    )
    optparser.add_option(
        "-f",
        "--file",
        help="filename to read in (or '-' for stdin)",
        action="store",
        default="",
    )

    optparser.add_option(
        "-t",
        "--topic",
        help="parse file as help topic",
        action="store_const",
        dest="initlevel",
        const=0,
    )
    optparser.add_option(
        "-c",
        "--command",
        help="parse file as help of core command",
        action="store_const",
        dest="initlevel",
        const=1,
    )
    optparser.add_option(
        "-e",
        "--extension",
        help="parse file as help of extension",
        action="store_const",
        dest="initlevel",
        const=1,
    )
    optparser.add_option(
        "-C",
        "--extension-command",
        help="parse file as help of extension command",
        action="store_const",
        dest="initlevel",
        const=3,
    )

    optparser.add_option(
        "-l",
        "--initlevel",
        help="set initial section level manually",
        action="store",
        type="int",
        default=0,
    )

    (options, args) = optparser.parse_args()

    ui = uimod.ui.load()
    ui.setconfig(b'ui', b'verbose', options.verbose, b'--verbose')
    ui.setconfig(b'ui', b'debug', options.debug, b'--debug')

    if options.file:
        if checkfile(ui, options.file, options.initlevel):
            sys.exit(1)
    else:
        if checkhghelps(ui):
            sys.exit(1)


if __name__ == "__main__":
    main()