view tests/test-contrib-testparseutil.t @ 47315:825d5a5907b4

exewrapper: avoid directly linking against python3X.dll

Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running.  This causes the whole process to fail if the DLL
isn't in the standard search path.  That also means it will never load the DLL
for HackableMercurial.  (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)

This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0.  (The environment variable persists after the
interpreter is initialized.)

Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly.  I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here.  This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.

With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`.  Legacy mode is required
though when Mercurial decides to spin up a pager.

[1] https://bugs.python.org/issue41941

Differential Revision: https://phab.mercurial-scm.org/D10756

  $ testparseutil="$TESTDIR"/../contrib/testparseutil.py

Internal test by doctest

  $ "$PYTHON" -m doctest "$testparseutil"

Tests for embedded python script

Typical cases

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF
  >   >>> for f in [1, 2, 3]:
  >   ...     foo = 1
  >   >>> foo = 2
  >   $ echo "doctest is terminated by command, empty line, or comment"
  >   >>> foo = 31
  >   expected output of doctest fragment
  >   >>> foo = 32
  >   
  >   >>> foo = 33
  > 
  >   >>> foo = 34
  > comment
  >   >>> foo = 35
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 4
  >   > 
  >   > EOF
  >   $ cat > foo.py <<EOF
  >   > foo = 5
  >   > EOF
  >   $ cat >> foo.py <<EOF
  >   > foo = 6 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ "\$PYTHON" <<NO_CHECK_EOF
  >   > foo = 7 # this should be ignored at detection
  >   > NO_CHECK_EOF
  >   $ cat > foo.py <<NO_CHECK_EOF
  >   > foo = 8 # this should be ignored at detection
  >   > NO_CHECK_EOF
  > 
  > doctest fragment ended by EOF
  > 
  >   >>> foo = 9
  > NO_CHECK_EOF
  <stdin>:1: <anonymous> starts
    |for f in [1, 2, 3]:
    |    foo = 1
    |foo = 2
  <stdin>:4: <anonymous> ends
  <stdin>:5: <anonymous> starts
    |foo = 31
    |
    |foo = 32
    |
    |foo = 33
  <stdin>:10: <anonymous> ends
  <stdin>:11: <anonymous> starts
    |foo = 34
  <stdin>:12: <anonymous> ends
  <stdin>:13: <anonymous> starts
    |foo = 35
  <stdin>:14: <anonymous> ends
  <stdin>:16: <anonymous> starts
    |foo = 4
    |
  <stdin>:18: <anonymous> ends
  <stdin>:20: foo.py starts
    |foo = 5
  <stdin>:21: foo.py ends
  <stdin>:23: foo.py starts
    |foo = 6 # appended
  <stdin>:24: foo.py ends
  <stdin>:38: <anonymous> starts
    |foo = 9
  <stdin>:39: <anonymous> ends

Invalid test script

(similar test for shell script and hgrc configuration is omitted,
because this tests common base class of them)

  $ "$PYTHON" "$testparseutil" -v pyembedded <<NO_CHECK_EOF > detected
  >   $ "\$PYTHON" <<EOF
  >   > foo = 1
  > 
  >   $ "\$PYTHON" <<EOF
  >   > foo = 2
  >   $ cat > bar.py <<EOF
  >   > bar = 2 # this fragment will be detected as expected
  >   > EOF
  > 
  >   $ cat > foo.py <<EOF
  >   > foo = 3
  > NO_CHECK_EOF
  <stdin>:3: unexpected line for "heredoc python invocation"
  <stdin>:6: unexpected line for "heredoc python invocation"
  <stdin>:11: unexpected end of file for "heredoc .py file"
  [1]
  $ cat detected
  <stdin>:7: bar.py starts
    |bar = 2 # this fragment will be detected as expected
  <stdin>:8: bar.py ends

Tests for embedded shell script

  $ "$PYTHON" "$testparseutil" -v shembedded <<NO_CHECK_EOF
  >   $ cat > foo.sh <<EOF
  >   > foo = 1
  >   > 
  >   > foo = 2
  >   > EOF
  >   $ cat >> foo.sh <<EOF
  >   > foo = 3 # appended
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > foo.sh <<NO_CHECK_EOF
  >   > # this should be ignored at detection
  >   > foo = 4
  >   > NO_CHECK_EOF
  > 
  > NO_CHECK_EOF
  <stdin>:2: foo.sh starts
    |foo = 1
    |
    |foo = 2
  <stdin>:5: foo.sh ends
  <stdin>:7: foo.sh starts
    |foo = 3 # appended
  <stdin>:8: foo.sh ends

Tests for embedded hgrc configuration

  $ "$PYTHON" "$testparseutil" -v hgrcembedded <<NO_CHECK_EOF
  >   $ cat > .hg/hgrc <<EOF
  >   > [ui]
  >   > verbose = true
  >   > 
  >   > # end of local configuration
  >   > EOF
  > 
  >   $ cat > \$HGRCPATH <<EOF
  >   > [extensions]
  >   > rebase =
  >   > # end of global configuration
  >   > EOF
  > 
  >   $ cat >> \$HGRCPATH <<EOF
  >   > # appended
  >   > [extensions]
  >   > rebase =!
  >   > EOF
  > 
  > NO_CHECK_EOF limit mark makes parsing ignore corresponded fragment
  > (this is useful to use bad code intentionally)
  > 
  >   $ cat > .hg/hgrc <<NO_CHECK_EOF
  >   > # this local configuration should be ignored at detection
  >   > [ui]
  >   > username = foo bar
  >   > NO_CHECK_EOF
  > 
  >   $ cat > \$HGRCPATH <<NO_CHECK_EOF
  >   > # this global configuration should be ignored at detection
  >   > [extensions]
  >   > foobar =
  >   > NO_CHECK_EOF
  > NO_CHECK_EOF
  <stdin>:2: .hg/hgrc starts
    |[ui]
    |verbose = true
    |
    |# end of local configuration
  <stdin>:6: .hg/hgrc ends
  <stdin>:9: $HGRCPATH starts
    |[extensions]
    |rebase =
    |# end of global configuration
  <stdin>:12: $HGRCPATH ends
  <stdin>:15: $HGRCPATH starts
    |# appended
    |[extensions]
    |rebase =!
  <stdin>:18: $HGRCPATH ends