view tests/test-diffstat.t @ 47315:825d5a5907b4

exewrapper: avoid directly linking against python3X.dll

Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running.  This causes the whole process to fail if the DLL
isn't in the standard search path.  That also means it will never load the DLL
for HackableMercurial.  (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)

This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0.  (The environment variable persists after the
interpreter is initialized.)

Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly.  I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here.  This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.

With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`.  Legacy mode is required
though when Mercurial decides to spin up a pager.

[1] https://bugs.python.org/issue41941

Differential Revision: https://phab.mercurial-scm.org/D10756

  $ hg init repo
  $ cd repo
  $ i=0; while [ "$i" -lt 213 ]; do echo a >> a; i=`expr $i + 1`; done
  $ hg add a
  $ cp a b
  $ hg add b

Wide diffstat:

  $ hg diff --stat
   a |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   b |  213 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

diffstat width:

  $ COLUMNS=24 hg diff --config ui.interactive=true --stat
   a |  213 ++++++++++++++
   b |  213 ++++++++++++++
   2 files changed, 426 insertions(+), 0 deletions(-)

  $ hg ci -m adda

  $ cat >> a <<EOF
  > a
  > a
  > a
  > EOF

Narrow diffstat:

  $ hg diff --stat
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)

  $ hg ci -m appenda

  >>> open("c", "wb").write(b"\0") and None
  $ touch d
  $ hg add c d

Binary diffstat:

  $ hg diff --stat
   c |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Binary git diffstat:

  $ hg diff --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg ci -m createb

  >>> open("file with spaces", "wb").write(b"\0") and None
  $ hg add "file with spaces"

Filename with spaces diffstat:

  $ hg diff --stat
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename with spaces git diffstat:

  $ hg diff --stat --git
   file with spaces |  Bin 
   1 files changed, 0 insertions(+), 0 deletions(-)

Filename without "a/" or "b/" (issue5759):

  $ hg diff --config 'diff.noprefix=1' -c1 --stat --git
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  $ hg diff --config 'diff.noprefix=1' -c2 --stat --git
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)

  $ hg log --config 'diff.noprefix=1' -r '1:' -p --stat --git
  changeset:   1:3a95b07bb77f
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     appenda
  
   a |  3 +++
   1 files changed, 3 insertions(+), 0 deletions(-)
  
  diff --git a a
  --- a
  +++ a
  @@ -211,3 +211,6 @@
   a
   a
   a
  +a
  +a
  +a
  
  changeset:   2:c60a6c753773
  tag:         tip
  user:        test
  date:        Thu Jan 01 00:00:00 1970 +0000
  summary:     createb
  
   c |  Bin 
   d |    0 
   2 files changed, 0 insertions(+), 0 deletions(-)
  
  diff --git c c
  new file mode 100644
  index 0000000000000000000000000000000000000000..f76dd238ade08917e6712764a16a22005a50573d
  GIT binary patch
  literal 1
  Ic${MZ000310RR91
  
  diff --git d d
  new file mode 100644
  

diffstat within directories:

  $ hg rm -f 'file with spaces'

  $ mkdir dir1 dir2
  $ echo new1 > dir1/new
  $ echo new2 > dir2/new
  $ hg add dir1/new dir2/new
  $ hg diff --stat
   dir1/new |  1 +
   dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root dir1 dir2
  warning: dir2 not inside relative root dir1

  $ hg diff --stat --root dir1 -I dir1/old

  $ cd dir1
  $ hg diff --stat .
   dir1/new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
  $ hg diff --stat --root .
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)

  $ hg diff --stat --root . --config ui.relative-paths=yes
   new |  1 +
   1 files changed, 1 insertions(+), 0 deletions(-)
--root trumps ui.relative-paths
  $ hg diff --stat --root .. --config ui.relative-paths=yes
   new         |  1 +
   ../dir2/new |  1 +
   2 files changed, 2 insertions(+), 0 deletions(-)
  $ hg diff --stat --root ../dir1 ../dir2
  warning: ../dir2 not inside relative root .

  $ hg diff --stat --root . -I old

  $ cd ..

Files with lines beginning with '--' or '++' should be properly counted in diffstat

  $ hg up -Cr tip
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ rm dir1/new
  $ rm dir2/new
  $ rm "file with spaces"
  $ cat > file << EOF
  > line 1
  > line 2
  > line 3
  > EOF
  $ hg commit -Am file
  adding file

Lines added starting with '--' should count as additions
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes
  > line 3
  > EOF

  $ hg diff --root .
  diff -r be1569354b24 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  -line 2
  +-- line 2, with dashes
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
  $ hg commit -m filev2
  $ cat > file << EOF
  > line 1
  > -- line 2, with dashes, changed again
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +-- line 2, with dashes, changed again
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

Lines changed starting with '--' should count as deletions
and starting with '++' should count as additions
  $ cat > file << EOF
  > line 1
  > ++ line 2, switched dashes to plusses
  > line 3
  > EOF

  $ hg diff --root .
  diff -r 160f7c034df6 file
  --- a/file	Thu Jan 01 00:00:00 1970 +0000
  +++ b/file	* (glob)
  @@ -1,3 +1,3 @@
   line 1
  --- line 2, with dashes
  +++ line 2, switched dashes to plusses
   line 3

  $ hg diff --root . --stat
   file |  2 +-
   1 files changed, 1 insertions(+), 1 deletions(-)

When a file is renamed, --git shouldn't loss the info about old file
  $ hg init issue6025
  $ cd issue6025
  $ echo > a
  $ hg ci -Am 'add a'
  adding a
  $ hg mv a b
  $ hg diff --git
  diff --git a/a b/b
  rename from a
  rename to b
  $ hg diff --stat
   a |  1 -
   b |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   a => b |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)
-- filename may contain whitespaces
  $ echo > c
  $ hg ci -Am 'add c'
  adding c
  $ hg mv c 'new c'
  $ hg diff --git
  diff --git a/c b/new c
  rename from c
  rename to new c
  $ hg diff --stat
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)
  $ hg diff --stat --git
   c => new c |  0 
   1 files changed, 0 insertions(+), 0 deletions(-)

Make sure `diff --stat -q --config diff.git-0` shows stat (issue4037)

  $ hg status
  A new c
  R c
  $ hg diff --stat -q
   c     |  1 -
   new c |  1 +
   2 files changed, 1 insertions(+), 1 deletions(-)