view tests/test-mq-eol.t @ 47315:825d5a5907b4

exewrapper: avoid directly linking against python3X.dll

Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running.  This causes the whole process to fail if the DLL
isn't in the standard search path.  That also means it will never load the DLL
for HackableMercurial.  (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)

This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0.  (The environment variable persists after the
interpreter is initialized.)

Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly.  I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here.  This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.

With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`.  Legacy mode is required
though when Mercurial decides to spin up a pager.

[1] https://bugs.python.org/issue41941

Differential Revision: https://phab.mercurial-scm.org/D10756

Test interactions between mq and patch.eol


  $ cat <<EOF >> $HGRCPATH
  > [extensions]
  > mq =
  > [diff]
  > nodates = 1
  > EOF

  $ cat > makepatch.py <<EOF
  > f = open('eol.diff', 'wb')
  > w = f.write
  > w(b'test message\n')
  > w(b'diff --git a/a b/a\n')
  > w(b'--- a/a\n')
  > w(b'+++ b/a\n')
  > w(b'@@ -1,5 +1,5 @@\n')
  > w(b' a\n')
  > w(b'-b\r\n')
  > w(b'+y\r\n')
  > w(b' c\r\n')
  > w(b' d\n')
  > w(b'-e\n')
  > w(b'\\\\ No newline at end of file\n')
  > w(b'+z\r\n')
  > w(b'\\\\ No newline at end of file\r\n')
  > EOF

  $ cat > cateol.py <<EOF
  > import sys
  > try:
  >     stdout = sys.stdout.buffer
  > except AttributeError:
  >     stdout = sys.stdout
  > for line in open(sys.argv[1], 'rb'):
  >     line = line.replace(b'\r', b'<CR>')
  >     line = line.replace(b'\n', b'<LF>')
  >     stdout.write(line + b'\n')
  > EOF

  $ hg init repo
  $ cd repo
  $ echo '\.diff' > .hgignore
  $ echo '\.rej' >> .hgignore


Test different --eol values

  $ "$PYTHON" -c 'open("a", "wb").write(b"a\nb\nc\nd\ne")'
  $ hg ci -Am adda
  adding .hgignore
  adding a
  $ "$PYTHON" ../makepatch.py
  $ hg qimport eol.diff
  adding eol.diff to series file

should fail in strict mode

  $ hg qpush
  applying eol.diff
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

invalid eol

  $ hg --config patch.eol='LFCR' qpush
  applying eol.diff
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh eol.diff
  [2]
  $ hg qpop
  popping eol.diff
  patch queue now empty

force LF

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ hg qrefresh
  $ "$PYTHON" ../cateol.py .hg/patches/eol.diff
  # HG changeset patch<LF>
  # Parent  0d0bf99a8b7a3842c6f8ef09e34f69156c4bd9d0<LF>
  test message<LF>
  <LF>
  diff -r 0d0bf99a8b7a a<LF>
  --- a/a<LF>
  +++ b/a<LF>
  @@ -1,5 +1,5 @@<LF>
  -a<LF>
  -b<LF>
  -c<LF>
  -d<LF>
  -e<LF>
  \ No newline at end of file<LF>
  +a<CR><LF>
  +y<CR><LF>
  +c<CR><LF>
  +d<CR><LF>
  +z<LF>
  \ No newline at end of file<LF>
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again forcing LF and compare revisions

  $ hg --config patch.eol='CRLF' qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty

push again without LF and compare revisions

  $ hg qpush
  applying eol.diff
  now at: eol.diff
  $ "$PYTHON" ../cateol.py a
  a<CR><LF>
  y<CR><LF>
  c<CR><LF>
  d<CR><LF>
  z
  $ hg qpop
  popping eol.diff
  patch queue now empty
  $ cd ..


Test .rej file EOL are left unchanged

  $ hg init testeol
  $ cd testeol
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n3\r\n4')"
  $ hg ci -Am adda
  adding a
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n2\r\n33\r\n4')"
  $ hg qnew patch1
  $ hg qpop
  popping patch1
  patch queue now empty
  $ "$PYTHON" -c "open('a', 'wb').write(b'1\r\n22\r\n33\r\n4')"
  $ hg ci -m changea

  $ hg --config 'patch.eol=LF' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file

  $ hg --config 'patch.eol=auto' qpush
  applying patch1
  patching file a
  Hunk #1 FAILED at 0
  1 out of 1 hunks FAILED -- saving rejects to file a.rej
  patch failed, unable to continue (try -v)
  patch failed, rejects left in working directory
  errors during apply, please fix and qrefresh patch1
  [2]
  $ hg qpop
  popping patch1
  patch queue now empty
  $ cat a.rej
  --- a
  +++ a
  @@ -1,4 +1,4 @@
   1\r (esc)
   2\r (esc)
  -3\r (esc)
  +33\r (esc)
   4
  \ No newline at end of file
  $ cd ..