view tests/test-pull-network.t @ 47315:825d5a5907b4

exewrapper: avoid directly linking against python3X.dll

Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running.  This causes the whole process to fail if the DLL
isn't in the standard search path.  That also means it will never load the DLL
for HackableMercurial.  (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)

This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0.  (The environment variable persists after the
interpreter is initialized.)

Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly.  I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here.  This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.

With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`.  Legacy mode is required
though when Mercurial decides to spin up a pager.

[1] https://bugs.python.org/issue41941

Differential Revision: https://phab.mercurial-scm.org/D10756

#require serve

#testcases sshv1 sshv2

#if sshv2
  $ cat >> $HGRCPATH << EOF
  > [experimental]
  > sshpeer.advertise-v2 = true
  > sshserver.support-v2 = true
  > EOF
#endif

  $ hg init test
  $ cd test

  $ echo foo>foo
  $ hg addremove
  adding foo
  $ hg commit -m 1

  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files

  $ hg serve -p $HGPORT -d --pid-file=hg.pid
  $ cat hg.pid >> $DAEMON_PIDS
  $ cd ..

  $ hg clone --pull http://foo:bar@localhost:$HGPORT/ copy
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

  $ cd copy
  $ hg verify
  checking changesets
  checking manifests
  crosschecking files in changesets and manifests
  checking files
  checked 1 changesets with 1 changes to 1 files

  $ hg co
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cat foo
  foo

  $ hg manifest --debug
  2ed2a3912a0b24502043eae84ee4b279c18b90dd 644   foo

  $ hg pull
  pulling from http://foo@localhost:$HGPORT/
  searching for changes
  no changes found

  $ hg rollback --dry-run --verbose
  repository tip rolled back to revision -1 (undo pull: http://foo:***@localhost:$HGPORT/)

Test pull of non-existing 20 character revision specification, making sure plain ascii identifiers
not are encoded like a node:

  $ hg pull -r 'xxxxxxxxxxxxxxxxxxxy'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'xxxxxxxxxxxxxxxxxxxy'
  [255]
  $ hg pull -r 'xxxxxxxxxxxxxxxxxx y'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'xxxxxxxxxxxxxxxxxx y'
  [255]

Test pull of working copy revision
  $ hg pull -r 'ffffffffffff'
  pulling from http://foo@localhost:$HGPORT/
  abort: unknown revision 'ffffffffffff'
  [255]

Test 'file:' uri handling:

  $ hg pull -q file://../test-does-not-exist
  abort: file:// URLs can only refer to localhost
  [255]

  $ hg pull -q file://../test
  abort: file:// URLs can only refer to localhost
  [255]

MSYS changes 'file:' into 'file;'

#if no-msys
  $ hg pull -q file:../test  # no-msys
#endif

It's tricky to make file:// URLs working on every platform with
regular shell commands.

  $ URL=`"$PYTHON" -c "from __future__ import print_function; import os; print('file://foobar' + ('/' + os.getcwd().replace(os.sep, '/')).replace('//', '/') + '/../test')"`
  $ hg pull -q "$URL"
  abort: file:// URLs can only refer to localhost
  [255]

  $ URL=`"$PYTHON" -c "from __future__ import print_function; import os; print('file://localhost' + ('/' + os.getcwd().replace(os.sep, '/')).replace('//', '/') + '/../test')"`
  $ hg pull -q "$URL"

SEC: check for unsafe ssh url

  $ cat >> $HGRCPATH << EOF
  > [ui]
  > ssh = sh -c "read l; read l; read l"
  > EOF

  $ hg pull 'ssh://-oProxyCommand=touch${IFS}owned/path'
  pulling from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg pull 'ssh://%2DoProxyCommand=touch${IFS}owned/path'
  pulling from ssh://-oProxyCommand%3Dtouch%24%7BIFS%7Downed/path
  abort: potentially unsafe url: 'ssh://-oProxyCommand=touch${IFS}owned/path'
  [255]
  $ hg pull 'ssh://fakehost|touch${IFS}owned/path'
  pulling from ssh://fakehost%7Ctouch%24%7BIFS%7Downed/path
  abort: no suitable response from remote hg
  [255]
  $ hg --config ui.timestamp-output=true pull 'ssh://fakehost%7Ctouch%20owned/path'
  \[20[2-9][0-9]-[01][0-9]-[0-3][0-9]T[0-5][0-9]:[0-5][0-9]:[0-5][0-9]\.[0-9][0-9][0-9][0-9][0-9][0-9]\] pulling from ssh://fakehost%7Ctouch%20owned/path (re)
  \[20[2-9][0-9]-[01][0-9]-[0-3][0-9]T[0-5][0-9]:[0-5][0-9]:[0-5][0-9]\.[0-9][0-9][0-9][0-9][0-9][0-9]\] abort: no suitable response from remote hg (re)
  [255]

  $ [ ! -f owned ] || echo 'you got owned'

  $ cd ..