view tests/test-pull-update.t @ 47315:825d5a5907b4

exewrapper: avoid directly linking against python3X.dll

Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running.  This causes the whole process to fail if the DLL
isn't in the standard search path.  That also means it will never load the DLL
for HackableMercurial.  (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)

This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0.  (The environment variable persists after the
interpreter is initialized.)

Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly.  I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here.  This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.

With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`.  Legacy mode is required
though when Mercurial decides to spin up a pager.

[1] https://bugs.python.org/issue41941

Differential Revision: https://phab.mercurial-scm.org/D10756

  $ hg init t
  $ cd t
  $ echo 1 > foo
  $ hg ci -Am m
  adding foo

  $ cd ..
  $ hg clone t tt
  updating to branch default
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ cd tt
  $ echo 1.1 > foo
  $ hg ci -Am m

  $ cd ../t
  $ echo 1.2 > foo
  $ hg ci -Am m

Should respect config to disable dirty update
  $ hg co -qC 0
  $ echo 2 > foo
  $ hg --config commands.update.check=abort pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  1 local changesets published
  abort: uncommitted changes
  [20]
  $ hg --config extensions.strip= strip --no-backup tip
  $ hg co -qC tip

Should not update to the other topological branch:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 107cefe13e42
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "800c91d5bfc1: m"
  1 other heads for branch "default"

  $ cd ../tt

Should not update to the other branch:

  $ hg pull -u ../t
  pulling from ../t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (+1 heads)
  new changesets 800c91d5bfc1
  1 local changesets published
  0 files updated, 0 files merged, 0 files removed, 0 files unresolved
  updated to "107cefe13e42: m"
  1 other heads for branch "default"

  $ HGMERGE=true hg merge
  merging foo
  0 files updated, 1 files merged, 0 files removed, 0 files unresolved
  (branch merge, don't forget to commit)
  $ hg ci -mm

  $ cd ../t

Should work:

  $ hg pull -u ../tt
  pulling from ../tt
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files (-1 heads)
  new changesets 483b76ad4309
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved

Similarity between "hg update" and "hg pull -u" in handling bookmark
====================================================================

Test that updating activates the bookmark, which matches with the
explicit destination of the update.

  $ echo 4 >> foo
  $ hg commit -m "#4"
  $ hg bookmark active-after-pull
  $ cd ../tt

(1) activating by --rev BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) activating by URL#BOOKMARK

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#active-after-pull
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  adding remote bookmark active-after-pull
  added 1 changesets with 1 changes to 1 files
  new changesets f815b3da6163
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (activating bookmark active-after-pull)

  $ hg parents -q
  4:f815b3da6163
  $ hg bookmarks
   * active-after-pull         4:f815b3da6163
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

Test that updating deactivates current active bookmark, if the
destination of the update is explicitly specified, and it doesn't
match with the name of any existing bookmarks.

  $ cd ../t
  $ hg bookmark -d active-after-pull
  $ hg branch bar -q
  $ hg commit -m "#5 (bar #1)"
  $ cd ../tt

(1) deactivating by --rev REV

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -r b5e4babfaaa7
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(2) deactivating by --branch BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u -b bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

(discard pulled changes)

  $ hg update -q 483b76ad4309
  $ hg rollback -q

(3) deactivating by URL#ANOTHER-BRANCH

  $ hg bookmark -f active-before-pull
  $ hg bookmarks
   * active-before-pull        3:483b76ad4309

  $ hg pull -u $TESTTMP/t#bar
  pulling from $TESTTMP/t
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 1 changes to 1 files
  new changesets f815b3da6163:b5e4babfaaa7
  1 local changesets published
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  (leaving bookmark active-before-pull)

  $ hg parents -q
  5:b5e4babfaaa7
  $ hg bookmarks
     active-before-pull        3:483b76ad4309

  $ cd ..

Issue622: hg init && hg pull -u URL doesn't checkout default branch

  $ hg init test
  $ cd test
  $ echo foo>foo
  $ hg addremove
  adding foo
  $ hg commit -m 1
  $ cd ..

  $ hg init empty
  $ cd empty
  $ hg pull -u ../test
  pulling from ../test
  requesting all changes
  adding changesets
  adding manifests
  adding file changes
  added 1 changesets with 1 changes to 1 files
  new changesets 340e38bdcde4
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved