Mercurial > hg
view tests/test-status.t @ 47315:825d5a5907b4
exewrapper: avoid directly linking against python3X.dll
Subsequent code calls `LoadLibrary()` to attempt to load the DLL, but because of
this symbol reference, there is an attempt to load the DLL used during the build
prior to `_main()` running. This causes the whole process to fail if the DLL
isn't in the standard search path. That also means it will never load the DLL
for HackableMercurial. (Maybe we should get rid of that for py3, since you can
install python for a user without admin rights?)
This could also be resolved by calling `GetProcAddress()` on the symbol and
dereferencing it, but using the environment variable is consistent with the
*.bat file since fc8a5c9ecee0. (The environment variable persists after the
interpreter is initialized.)
Far more concerning is somehow I've gotten my system into a state where setting
the flag causes any output to the pager to be lost (as if it wasn't set at all)
in MSYS, cmd.exe, WSL, and PowerShell using py3.9.0, but the environment
variable works properly. I'm sure this flag worked on some versions of py3, so
I'm not sure what's going on here. This is might be related to init config
related changes in 3.8[1], since it works with 3.7.8, but fails with 3.8.1.
Somebody who understands encoding issues better than I do should give some
thought to if we need to make some changes to our encoding strategy on Windows
with py3.
With or without the flag/envvar, there is proper output if the command is
directly paged by piping to `more.com` (in any environment) or `less` (in MSYS
and WSL), or if paging is disabled with `--pager=no`. Legacy mode is required
though when Mercurial decides to spin up a pager.
[1] https://bugs.python.org/issue41941
Differential Revision: https://phab.mercurial-scm.org/D10756
author | Matt Harbison <matt_harbison@yahoo.com> |
---|---|
date | Tue, 11 May 2021 01:05:38 -0400 |
parents | 6763913fa175 |
children | 717a94b423b9 |
line wrap: on
line source
#testcases dirstate-v1 dirstate-v1-tree dirstate-v2 #if no-rust $ hg init repo0 --config format.exp-dirstate-v2=1 abort: dirstate v2 format requested by config but not supported (requires Rust extensions) [255] #endif #if dirstate-v1-tree #require rust $ echo '[experimental]' >> $HGRCPATH $ echo 'dirstate-tree.in-memory=1' >> $HGRCPATH #endif #if dirstate-v2 #require rust $ echo '[format]' >> $HGRCPATH $ echo 'exp-dirstate-v2=1' >> $HGRCPATH #endif $ hg init repo1 $ cd repo1 $ mkdir a b a/1 b/1 b/2 $ touch in_root a/in_a b/in_b a/1/in_a_1 b/1/in_b_1 b/2/in_b_2 hg status in repo root: $ hg status ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root hg status . in repo root: $ hg status . ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a . ? 1/in_a_1 ? in_a $ hg status --cwd a .. ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd b ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b . ? 1/in_b_1 ? 2/in_b_2 ? in_b $ hg status --cwd b .. ? ../a/1/in_a_1 ? ../a/in_a ? 1/in_b_1 ? 2/in_b_2 ? in_b ? ../in_root $ hg status --cwd a/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd a/1 . ? in_a_1 $ hg status --cwd a/1 .. ? in_a_1 ? ../in_a $ hg status --cwd b/1 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/1 . ? in_b_1 $ hg status --cwd b/1 .. ? in_b_1 ? ../2/in_b_2 ? ../in_b $ hg status --cwd b/2 ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ hg status --cwd b/2 . ? in_b_2 $ hg status --cwd b/2 .. ? ../1/in_b_1 ? in_b_2 ? ../in_b combining patterns with root and patterns without a root works $ hg st a/in_a re:.*b$ ? a/in_a ? b/in_b tweaking defaults works $ hg status --cwd a --config ui.tweakdefaults=yes ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ HGPLAIN=1 hg status --cwd a --config ui.tweakdefaults=yes ? a/1/in_a_1 (glob) ? a/in_a (glob) ? b/1/in_b_1 (glob) ? b/2/in_b_2 (glob) ? b/in_b (glob) ? in_root $ HGPLAINEXCEPT=tweakdefaults hg status --cwd a --config ui.tweakdefaults=yes ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root (glob) relative paths can be requested $ hg status --cwd a --config ui.relative-paths=yes ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ hg status --cwd a . --config ui.relative-paths=legacy ? 1/in_a_1 ? in_a $ hg status --cwd a . --config ui.relative-paths=no ? a/1/in_a_1 ? a/in_a commands.status.relative overrides ui.relative-paths $ cat >> $HGRCPATH <<EOF > [ui] > relative-paths = False > [commands] > status.relative = True > EOF $ hg status --cwd a ? 1/in_a_1 ? in_a ? ../b/1/in_b_1 ? ../b/2/in_b_2 ? ../b/in_b ? ../in_root $ HGPLAIN=1 hg status --cwd a ? a/1/in_a_1 (glob) ? a/in_a (glob) ? b/1/in_b_1 (glob) ? b/2/in_b_2 (glob) ? b/in_b (glob) ? in_root if relative paths are explicitly off, tweakdefaults doesn't change it $ cat >> $HGRCPATH <<EOF > [commands] > status.relative = False > EOF $ hg status --cwd a --config ui.tweakdefaults=yes ? a/1/in_a_1 ? a/in_a ? b/1/in_b_1 ? b/2/in_b_2 ? b/in_b ? in_root $ cd .. $ hg init repo2 $ cd repo2 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg ci -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch modified added unknown ignored $ hg add added $ hg remove removed $ rm deleted hg status: $ hg status A added R removed ! deleted ? unknown hg status modified added removed deleted unknown never-existed ignored: $ hg status modified added removed deleted unknown never-existed ignored never-existed: * (glob) A added R removed ! deleted ? unknown $ hg copy modified copied hg status -C: $ hg status -C A added A copied modified R removed ! deleted ? unknown hg status -A: $ hg status -A A added A copied modified R removed ! deleted ? unknown I ignored C .hgignore C modified $ hg status -A -T '{status} {path} {node|shortest}\n' A added ffff A copied ffff R removed ffff ! deleted ffff ? unknown ffff I ignored ffff C .hgignore ffff C modified ffff $ hg status -A -Tjson [ { "itemtype": "file", "path": "added", "status": "A" }, { "itemtype": "file", "path": "copied", "source": "modified", "status": "A" }, { "itemtype": "file", "path": "removed", "status": "R" }, { "itemtype": "file", "path": "deleted", "status": "!" }, { "itemtype": "file", "path": "unknown", "status": "?" }, { "itemtype": "file", "path": "ignored", "status": "I" }, { "itemtype": "file", "path": ".hgignore", "status": "C" }, { "itemtype": "file", "path": "modified", "status": "C" } ] $ hg status -A -Tpickle > pickle >>> from __future__ import print_function >>> from mercurial import util >>> pickle = util.pickle >>> data = sorted((x[b'status'].decode(), x[b'path'].decode()) for x in pickle.load(open("pickle", r"rb"))) >>> for s, p in data: print("%s %s" % (s, p)) ! deleted ? pickle ? unknown A added A copied C .hgignore C modified I ignored R removed $ rm pickle $ echo "^ignoreddir$" > .hgignore $ mkdir ignoreddir $ touch ignoreddir/file Test templater support: $ hg status -AT "[{status}]\t{if(source, '{source} -> ')}{path}\n" [M] .hgignore [A] added [A] modified -> copied [R] removed [!] deleted [?] ignored [?] unknown [I] ignoreddir/file [C] modified $ hg status -AT default M .hgignore A added A copied modified R removed ! deleted ? ignored ? unknown I ignoreddir/file C modified $ hg status -T compact abort: "status" not in template map [255] hg status ignoreddir/file: $ hg status ignoreddir/file hg status -i ignoreddir/file: $ hg status -i ignoreddir/file I ignoreddir/file $ cd .. Check 'status -q' and some combinations $ hg init repo3 $ cd repo3 $ touch modified removed deleted ignored $ echo "^ignored$" > .hgignore $ hg commit -A -m 'initial checkin' adding .hgignore adding deleted adding modified adding removed $ touch added unknown ignored $ hg add added $ echo "test" >> modified $ hg remove removed $ rm deleted $ hg copy modified copied Specify working directory revision explicitly, that should be the same as "hg status" $ hg status --change "wdir()" M modified A added A copied R removed ! deleted ? unknown Run status with 2 different flags. Check if result is the same or different. If result is not as expected, raise error $ assert() { > hg status $1 > ../a > hg status $2 > ../b > if diff ../a ../b > /dev/null; then > out=0 > else > out=1 > fi > if [ $3 -eq 0 ]; then > df="same" > else > df="different" > fi > if [ $out -ne $3 ]; then > echo "Error on $1 and $2, should be $df." > fi > } Assert flag1 flag2 [0-same | 1-different] $ assert "-q" "-mard" 0 $ assert "-A" "-marduicC" 0 $ assert "-qA" "-mardcC" 0 $ assert "-qAui" "-A" 0 $ assert "-qAu" "-marducC" 0 $ assert "-qAi" "-mardicC" 0 $ assert "-qu" "-u" 0 $ assert "-q" "-u" 1 $ assert "-m" "-a" 1 $ assert "-r" "-d" 1 $ cd .. $ hg init repo4 $ cd repo4 $ touch modified removed deleted $ hg ci -q -A -m 'initial checkin' $ touch added unknown $ hg add added $ hg remove removed $ rm deleted $ echo x > modified $ hg copy modified copied $ hg ci -m 'test checkin' -d "1000001 0" $ rm * $ touch unrelated $ hg ci -q -A -m 'unrelated checkin' -d "1000002 0" hg status --change 1: $ hg status --change 1 M modified A added A copied R removed hg status --change 1 unrelated: $ hg status --change 1 unrelated hg status -C --change 1 added modified copied removed deleted: $ hg status -C --change 1 added modified copied removed deleted M modified A added A copied modified R removed hg status -A --change 1 and revset: $ hg status -A --change '1|1' M modified A added A copied modified R removed C deleted $ cd .. hg status with --rev and reverted changes: $ hg init reverted-changes-repo $ cd reverted-changes-repo $ echo a > file $ hg add file $ hg ci -m a $ echo b > file $ hg ci -m b reverted file should appear clean $ hg revert -r 0 . reverting file $ hg status -A --rev 0 C file #if execbit reverted file with changed flag should appear modified $ chmod +x file $ hg status -A --rev 0 M file $ hg revert -r 0 . reverting file reverted and committed file with changed flag should appear modified $ hg co -C . 1 files updated, 0 files merged, 0 files removed, 0 files unresolved $ chmod +x file $ hg ci -m 'change flag' $ hg status -A --rev 1 --rev 2 M file $ hg diff -r 1 -r 2 #endif $ cd .. hg status of binary file starting with '\1\n', a separator for metadata: $ hg init repo5 $ cd repo5 >>> open("010a", r"wb").write(b"\1\nfoo") and None $ hg ci -q -A -m 'initial checkin' $ hg status -A C 010a >>> open("010a", r"wb").write(b"\1\nbar") and None $ hg status -A M 010a $ hg ci -q -m 'modify 010a' $ hg status -A --rev 0:1 M 010a $ touch empty $ hg ci -q -A -m 'add another file' $ hg status -A --rev 1:2 010a C 010a $ cd .. test "hg status" with "directory pattern" which matches against files only known on target revision. $ hg init repo6 $ cd repo6 $ echo a > a.txt $ hg add a.txt $ hg commit -m '#0' $ mkdir -p 1/2/3/4/5 $ echo b > 1/2/3/4/5/b.txt $ hg add 1/2/3/4/5/b.txt $ hg commit -m '#1' $ hg update -C 0 > /dev/null $ hg status -A C a.txt the directory matching against specified pattern should be removed, because directory existence prevents 'dirstate.walk()' from showing warning message about such pattern. $ test ! -d 1 $ hg status -A --rev 1 1/2/3/4/5/b.txt R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3/4/5 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1/2/3 R 1/2/3/4/5/b.txt $ hg status -A --rev 1 1 R 1/2/3/4/5/b.txt $ hg status --config ui.formatdebug=True --rev 1 1 status = [ { 'itemtype': 'file', 'path': '1/2/3/4/5/b.txt', 'status': 'R' }, ] #if windows $ hg --config ui.slash=false status -A --rev 1 1 R 1\2\3\4\5\b.txt #endif $ cd .. Status after move overwriting a file (issue4458) ================================================= $ hg init issue4458 $ cd issue4458 $ echo a > a $ echo b > b $ hg commit -Am base adding a adding b with --force $ hg mv b --force a $ hg st --copies M a b R b $ hg revert --all reverting a undeleting b $ rm *.orig without force $ hg rm a $ hg st --copies R a $ hg mv b a $ hg st --copies M a b R b using ui.statuscopies setting $ hg st --config ui.statuscopies=true M a b R b $ hg st --config ui.statuscopies=false M a R b $ hg st --config ui.tweakdefaults=yes M a b R b using log status template (issue5155) $ hg log -Tstatus -r 'wdir()' -C changeset: 2147483647:ffffffffffff parent: 0:8c55c58b4c0e user: test date: * (glob) files: M a b R b $ hg log -GTstatus -r 'wdir()' -C o changeset: 2147483647:ffffffffffff | parent: 0:8c55c58b4c0e ~ user: test date: * (glob) files: M a b R b Other "bug" highlight, the revision status does not report the copy information. This is buggy behavior. $ hg commit -m 'blah' $ hg st --copies --change . M a R b using log status template, the copy information is displayed correctly. $ hg log -Tstatus -r. -C changeset: 1:6685fde43d21 tag: tip user: test date: * (glob) summary: blah files: M a b R b $ cd .. Make sure .hg doesn't show up even as a symlink $ hg init repo0 $ mkdir symlink-repo0 $ cd symlink-repo0 $ ln -s ../repo0/.hg $ hg status If the size hasn’t changed but mtime has, status needs to read the contents of the file to check whether it has changed $ echo 1 > a $ echo 1 > b $ touch -t 200102030000 a b $ hg commit -Aqm '#0' $ echo 2 > a $ touch -t 200102040000 a b $ hg status M a Asking specifically for the status of a deleted/removed file $ rm a $ rm b $ hg status a ! a $ hg rm a $ hg rm b $ hg status a R a $ hg commit -qm '#1' $ hg status a a: $ENOENT$ Check using include flag with pattern when status does not need to traverse the working directory (issue6483) $ cd .. $ hg init issue6483 $ cd issue6483 $ touch a.py b.rs $ hg add a.py b.rs $ hg st -aI "*.py" A a.py Also check exclude pattern $ hg st -aX "*.rs" A a.py issue6335 When a directory containing a tracked file gets symlinked, as of 5.8 `hg st` only gives the correct answer about clean (or deleted) files if also listing unknowns. The tree-based dirstate and status algorithm fix this: #if symlink no-dirstate-v1 $ cd .. $ hg init issue6335 $ cd issue6335 $ mkdir foo $ touch foo/a $ hg ci -Ama adding foo/a $ mv foo bar $ ln -s bar foo $ hg status ! foo/a ? bar/a ? foo $ hg status -c # incorrect output with `dirstate-v1` $ hg status -cu ? bar/a ? foo $ hg status -d # incorrect output with `dirstate-v1` ! foo/a $ hg status -du ! foo/a ? bar/a ? foo #endif Create a repo with files in each possible status $ cd .. $ hg init repo7 $ cd repo7 $ mkdir subdir $ touch clean modified deleted removed $ touch subdir/clean subdir/modified subdir/deleted subdir/removed $ echo ignored > .hgignore $ hg ci -Aqm '#0' $ echo 1 > modified $ echo 1 > subdir/modified $ rm deleted $ rm subdir/deleted $ hg rm removed $ hg rm subdir/removed $ touch unknown ignored $ touch subdir/unknown subdir/ignored Check the output $ hg status M modified M subdir/modified R removed R subdir/removed ! deleted ! subdir/deleted ? subdir/unknown ? unknown $ hg status -mard M modified M subdir/modified R removed R subdir/removed ! deleted ! subdir/deleted $ hg status -A M modified M subdir/modified R removed R subdir/removed ! deleted ! subdir/deleted ? subdir/unknown ? unknown I ignored I subdir/ignored C .hgignore C clean C subdir/clean Note: `hg status some-name` creates a patternmatcher which is not supported yet by the Rust implementation of status, but includematcher is supported. --include is used below for that reason Remove a directory that contains tracked files $ rm -r subdir $ hg status --include subdir R subdir/removed ! subdir/clean ! subdir/deleted ! subdir/modified … and replace it by a file $ touch subdir $ hg status --include subdir R subdir/removed ! subdir/clean ! subdir/deleted ! subdir/modified ? subdir Replaced a deleted or removed file with a directory $ mkdir deleted removed $ touch deleted/1 removed/1 $ hg status --include deleted --include removed R removed ! deleted ? deleted/1 ? removed/1 $ hg add removed/1 $ hg status --include deleted --include removed A removed/1 R removed ! deleted ? deleted/1 Deeply nested files in an ignored directory are still listed on request $ echo ignored-dir >> .hgignore $ mkdir ignored-dir $ mkdir ignored-dir/subdir $ touch ignored-dir/subdir/1 $ hg status --ignored I ignored I ignored-dir/subdir/1