help: use full name of extensions to look up them for keyword search
Before this patch, "hg help -k KEYWORD" fails, if there is the
extension of which name includes ".", because "extensions.load()"
invoked from "help.topicmatch()" fails to look such extension up, even
though it is already loaded in.
"help.topicmatch()" invokes "extensions.load()" with the name gotten
from "extensions.enabled()". The former expects full name of extension
(= key in '[extensions]' section), but the latter returns names
shortened by "split('.')[-1]". This difference causes failure of
looking extension up.
This patch adds "shortname" argument to "extensions.enabled()" to make
it return shortened names only if it is True. "help.topicmatch()"
turns it off to get full name of extensions.
Then, this patch shortens full name of extensions by "split('.')[-1]"
for showing them in the list of extensions.
Shortening is also applied on names gotten from
"extensions.disabled()" but harmless, because it returns only
extensions directly under "hgext" and their names should not include
".".
$ "$TESTDIR/hghave" serve || exit 80
$ hg init test
$ cd test
$ echo foo>foo
$ mkdir foo.d foo.d/bAr.hg.d foo.d/baR.d.hg
$ echo foo>foo.d/foo
$ echo bar>foo.d/bAr.hg.d/BaR
$ echo bar>foo.d/baR.d.hg/bAR
$ hg commit -A -m 1
adding foo
adding foo.d/bAr.hg.d/BaR
adding foo.d/baR.d.hg/bAR
adding foo.d/foo
$ hg serve -p $HGPORT -d --pid-file=../hg1.pid -E ../error.log
$ hg --config server.uncompressed=False serve -p $HGPORT1 -d --pid-file=../hg2.pid
Test server address cannot be reused
#if windows
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': * (glob)
[255]
#else
$ hg serve -p $HGPORT1 2>&1
abort: cannot start server at ':$HGPORT1': Address already in use
[255]
#endif
$ cd ..
$ cat hg1.pid hg2.pid >> $DAEMON_PIDS
clone via stream
$ hg clone --uncompressed http://localhost:$HGPORT/ copy 2>&1
streaming all changes
6 files to transfer, 606 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
try to clone via stream, should use pull instead
$ hg clone --uncompressed http://localhost:$HGPORT1/ copy2
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
clone via pull
$ hg clone http://localhost:$HGPORT1/ copy-pull
requesting all changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg verify -R copy-pull
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
4 files, 1 changesets, 4 total revisions
$ cd test
$ echo bar > bar
$ hg commit -A -d '1 0' -m 2
adding bar
$ cd ..
clone over http with --update
$ hg clone http://localhost:$HGPORT1/ updated --update 0
requesting all changes
adding changesets
adding manifests
adding file changes
added 2 changesets with 5 changes to 5 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg log -r . -R updated
changeset: 0:8b6053c928fe
user: test
date: Thu Jan 01 00:00:00 1970 +0000
summary: 1
$ rm -rf updated
incoming via HTTP
$ hg clone http://localhost:$HGPORT1/ --rev 0 partial
adding changesets
adding manifests
adding file changes
added 1 changesets with 4 changes to 4 files
updating to branch default
4 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ cd partial
$ touch LOCAL
$ hg ci -qAm LOCAL
$ hg incoming http://localhost:$HGPORT1/ --template '{desc}\n'
comparing with http://localhost:$HGPORT1/
searching for changes
2
$ cd ..
pull
$ cd copy-pull
$ echo '[hooks]' >> .hg/hgrc
$ echo "changegroup = python \"$TESTDIR/printenv.py\" changegroup" >> .hg/hgrc
$ hg pull
pulling from http://localhost:$HGPORT1/
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
changegroup hook: HG_NODE=5fed3813f7f5e1824344fdc9cf8f63bb662c292d HG_SOURCE=pull HG_URL=http://localhost:$HGPORT1/
(run 'hg update' to get a working copy)
$ cd ..
clone from invalid URL
$ hg clone http://localhost:$HGPORT/bad
abort: HTTP Error 404: Not Found
[255]
test http authentication
+ use the same server to test server side streaming preference
$ cd test
$ cat << EOT > userpass.py
> import base64
> from mercurial.hgweb import common
> def perform_authentication(hgweb, req, op):
> auth = req.env.get('HTTP_AUTHORIZATION')
> if not auth:
> raise common.ErrorResponse(common.HTTP_UNAUTHORIZED, 'who',
> [('WWW-Authenticate', 'Basic Realm="mercurial"')])
> if base64.b64decode(auth.split()[1]).split(':', 1) != ['user', 'pass']:
> raise common.ErrorResponse(common.HTTP_FORBIDDEN, 'no')
> def extsetup():
> common.permhooks.insert(0, perform_authentication)
> EOT
$ hg --config extensions.x=userpass.py serve -p $HGPORT2 -d --pid-file=pid \
> --config server.preferuncompressed=True
$ cat pid >> $DAEMON_PIDS
$ hg id http://localhost:$HGPORT2/
abort: http authorization required
[255]
$ hg id http://user@localhost:$HGPORT2/
abort: http authorization required
[255]
$ hg id http://user:pass@localhost:$HGPORT2/
5fed3813f7f5
$ echo '[auth]' >> .hg/hgrc
$ echo 'l.schemes=http' >> .hg/hgrc
$ echo 'l.prefix=lo' >> .hg/hgrc
$ echo 'l.username=user' >> .hg/hgrc
$ echo 'l.password=pass' >> .hg/hgrc
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://localhost:$HGPORT2/
5fed3813f7f5
$ hg id http://user@localhost:$HGPORT2/
5fed3813f7f5
$ hg clone http://user:pass@localhost:$HGPORT2/ dest 2>&1
streaming all changes
7 files to transfer, 916 bytes of data
transferred * bytes in * seconds (*/sec) (glob)
updating to branch default
5 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg id http://user2@localhost:$HGPORT2/
abort: http authorization required
[255]
$ hg id http://user:pass2@localhost:$HGPORT2/
abort: HTTP Error 403: no
[255]
$ cd ..
clone of serve with repo in root and unserved subrepo (issue2970)
$ hg --cwd test init sub
$ echo empty > test/sub/empty
$ hg --cwd test/sub add empty
$ hg --cwd test/sub commit -qm 'add empty'
$ hg --cwd test/sub tag -r 0 something
$ echo sub = sub > test/.hgsub
$ hg --cwd test add .hgsub
$ hg --cwd test commit -qm 'add subrepo'
$ hg clone http://localhost:$HGPORT noslash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
$ hg clone http://localhost:$HGPORT/ slash-clone
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 7 changes to 7 files
updating to branch default
abort: HTTP Error 404: Not Found
[255]
check error log
$ cat error.log