tests/test-parseindex2.py

util: teach lrucachedict to enforce a max total cost

Now that lrucachedict entries can have a numeric cost associated
with them and we can easily pop the oldest item in the cache, it
now becomes relatively trivial to implement support for enforcing
a high water mark on the total cost of items in the cache.

This commit teaches lrucachedict instances to have a max cost
associated with them. When items are inserted, we pop old items
until enough "cost" frees up to make room for the new item.

This feature is close to zero cost when not used (modulo the insertion
regressed introduced by the previous commit):

$ ./hg perflrucachedict --size 4 --gets 1000000 --sets 1000000 --mixed 1000000
! gets
! wall 0.607444 comb 0.610000 user 0.610000 sys 0.000000 (best of 17)
! wall 0.601653 comb 0.600000 user 0.600000 sys 0.000000 (best of 17)
! inserts
! wall 0.678261 comb 0.680000 user 0.680000 sys 0.000000 (best of 14)
! wall 0.685042 comb 0.680000 user 0.680000 sys 0.000000 (best of 15)
! sets
! wall 0.808770 comb 0.800000 user 0.800000 sys 0.000000 (best of 13)
! wall 0.834241 comb 0.830000 user 0.830000 sys 0.000000 (best of 12)
! mixed
! wall 0.782441 comb 0.780000 user 0.780000 sys 0.000000 (best of 13)
! wall 0.803804 comb 0.800000 user 0.800000 sys 0.000000 (best of 13)

$ hg perflrucachedict --size 1000 --gets 1000000 --sets 1000000 --mixed 1000000
! init
! wall 0.006952 comb 0.010000 user 0.010000 sys 0.000000 (best of 418)
! gets
! wall 0.613350 comb 0.610000 user 0.610000 sys 0.000000 (best of 17)
! wall 0.617415 comb 0.620000 user 0.620000 sys 0.000000 (best of 17)
! inserts
! wall 0.701270 comb 0.700000 user 0.700000 sys 0.000000 (best of 15)
! wall 0.700516 comb 0.700000 user 0.700000 sys 0.000000 (best of 15)
! sets
! wall 0.825720 comb 0.830000 user 0.830000 sys 0.000000 (best of 13)
! wall 0.837946 comb 0.840000 user 0.830000 sys 0.010000 (best of 12)
! mixed
! wall 0.821644 comb 0.820000 user 0.820000 sys 0.000000 (best of 13)
! wall 0.850559 comb 0.850000 user 0.850000 sys 0.000000 (best of 12)

I reckon the slight slowdown on insert is due to added if checks.

For caches with total cost limiting enabled:

$ hg perflrucachedict --size 4 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 100
! gets w/ cost limit
! wall 0.598737 comb 0.590000 user 0.590000 sys 0.000000 (best of 17)
! inserts w/ cost limit
! wall 1.694282 comb 1.700000 user 1.700000 sys 0.000000 (best of 6)
! mixed w/ cost limit
! wall 1.157655 comb 1.150000 user 1.150000 sys 0.000000 (best of 9)

$ hg perflrucachedict --size 1000 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 10000
! gets w/ cost limit
! wall 0.598526 comb 0.600000 user 0.600000 sys 0.000000 (best of 17)
! inserts w/ cost limit
! wall 37.838315 comb 37.840000 user 37.840000 sys 0.000000 (best of 3)
! mixed w/ cost limit
! wall 18.060198 comb 18.060000 user 18.060000 sys 0.000000 (best of 3)

$ hg perflrucachedict --size 1000 --gets 1000000 --sets 1000000 --mixed 1000000 --costlimit 10000 --mixedgetfreq 90
! gets w/ cost limit
! wall 0.600024 comb 0.600000 user 0.600000 sys 0.000000 (best of 17)
! inserts w/ cost limit
! wall 37.154547 comb 37.120000 user 37.120000 sys 0.000000 (best of 3)
! mixed w/ cost limit
! wall 4.381602 comb 4.380000 user 4.370000 sys 0.010000 (best of 3)

The functions we're benchmarking are slightly different, which could
move numbers by a few milliseconds. But the slowdown on insert is too
great to be explained by that. The slowness is due to insert heavy
operations needing to call popoldest() repeatedly when the cache is
at capacity. The next commit will address this.

Differential Revision: https://phab.mercurial-scm.org/D4503

"""This unit test primarily tests parsers.parse_index2().

It also checks certain aspects of the parsers module as a whole.
"""

from __future__ import absolute_import, print_function

import struct
import subprocess
import sys
import unittest

from mercurial.node import (
    nullid,
    nullrev,
)
from mercurial import (
    node as nodemod,
    policy,
    pycompat,
)

parsers = policy.importmod(r'parsers')

# original python implementation
def gettype(q):
    return int(q & 0xFFFF)

def offset_type(offset, type):
    return int(int(offset) << 16 | type)

indexformatng = ">Qiiiiii20s12x"

def py_parseindex(data, inline) :
    s = 64
    cache = None
    index = []
    nodemap = {nullid: nullrev}
    n = off = 0

    l = len(data) - s
    append = index.append
    if inline:
        cache = (0, data)
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            if e[1] < 0:
                break
            off += e[1] + s
    else:
        while off <= l:
            e = struct.unpack(indexformatng, data[off:off + s])
            nodemap[e[7]] = n
            append(e)
            n += 1
            off += s

    e = list(index[0])
    type = gettype(e[0])
    e[0] = offset_type(0, type)
    index[0] = tuple(e)

    return index, cache

data_inlined = (
    b'\x00\x01\x00\x01\x00\x00\x00\x00\x00\x00\x01\x8c'
    b'\x00\x00\x04\x07\x00\x00\x00\x00\x00\x00\x15\x15\xff\xff\xff'
    b'\xff\xff\xff\xff\xff\xebG\x97\xb7\x1fB\x04\xcf\x13V\x81\tw\x1b'
    b'w\xdduR\xda\xc6\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
    b'x\x9c\x9d\x93?O\xc30\x10\xc5\xf7|\x8a\xdb\x9a\xa8m\x06\xd8*\x95'
    b'\x81B\xa1\xa2\xa2R\xcb\x86Pd\x9a\x0b5$vd_\x04\xfd\xf6\x9c\xff@'
    b'\x11!\x0b\xd9\xec\xf7\xbbw\xe7gG6\xad6\x04\xdaN\xc0\x92\xa0$)'
    b'\xb1\x82\xa2\xd1%\x16\xa4\x8b7\xa9\xca\xd4-\xb2Y\x02\xfc\xc9'
    b'\xcaS\xf9\xaeX\xed\xb6\xd77Q\x02\x83\xd4\x19\xf5--Y\xea\xe1W'
    b'\xab\xed\x10\xceR\x0f_\xdf\xdf\r\xe1,\xf5\xf0\xcb\xf5 \xceR\x0f'
    b'_\xdc\x0e\x0e\xc3R\x0f_\xae\x96\x9b!\x9e\xa5\x1e\xbf\xdb,\x06'
    b'\xc7q\x9a/\x88\x82\xc3B\xea\xb5\xb4TJ\x93\xb6\x82\x0e\xe16\xe6'
    b'KQ\xdb\xaf\xecG\xa3\xd1 \x01\xd3\x0b_^\xe8\xaa\xa0\xae\xad\xd1'
    b'&\xbef\x1bz\x08\xb0|\xc9Xz\x06\xf6Z\x91\x90J\xaa\x17\x90\xaa'
    b'\xd2\xa6\x11$5C\xcf\xba#\xa0\x03\x02*2\x92-\xfc\xb1\x94\xdf\xe2'
    b'\xae\xb8\'m\x8ey0^\x85\xd3\x82\xb4\xf0`:\x9c\x00\x8a\xfd\x01'
    b'\xb0\xc6\x86\x8b\xdd\xae\x80\xf3\xa9\x9fd\x16\n\x00R%\x1a\x06'
    b'\xe9\xd8b\x98\x1d\xf4\xf3+\x9bf\x01\xd8p\x1b\xf3.\xed\x9f^g\xc3'
    b'^\xd9W81T\xdb\xd5\x04sx|\xf2\xeb\xd6`%?x\xed"\x831\xbf\xf3\xdc'
    b'b\xeb%gaY\xe1\xad\x9f\xb9f\'1w\xa9\xa5a\x83s\x82J\xb98\xbc4\x8b'
    b'\x83\x00\x9f$z\xb8#\xa5\xb1\xdf\x98\xd9\xec\x1b\x89O\xe3Ts\x9a4'
    b'\x17m\x8b\xfc\x8f\xa5\x95\x9a\xfc\xfa\xed,\xe5|\xa1\xfe\x15\xb9'
    b'\xbc\xb2\x93\x1f\xf2\x95\xff\xdf,\x1a\xc5\xe7\x17*\x93Oz:>\x0e'
    )

data_non_inlined = (
    b'\x00\x00\x00\x01\x00\x00\x00\x00\x00\x01D\x19'
    b'\x00\x07e\x12\x00\x00\x00\x00\x00\x00\x00\x00\xff\xff\xff\xff'
    b'\xff\xff\xff\xff\xd1\xf4\xbb\xb0\xbe\xfc\x13\xbd\x8c\xd3\x9d'
    b'\x0f\xcd\xd9;\x8c\x07\x8cJ/\x00\x00\x00\x00\x00\x00\x00\x00\x00'
    b'\x00\x00\x00\x00\x00\x00\x01D\x19\x00\x00\x00\x00\x00\xdf\x00'
    b'\x00\x01q\x00\x00\x00\x01\x00\x00\x00\x01\x00\x00\x00\x00\xff'
    b'\xff\xff\xff\xc1\x12\xb9\x04\x96\xa4Z1t\x91\xdfsJ\x90\xf0\x9bh'
    b'\x07l&\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00'
    b'\x00\x01D\xf8\x00\x00\x00\x00\x01\x1b\x00\x00\x01\xb8\x00\x00'
    b'\x00\x01\x00\x00\x00\x02\x00\x00\x00\x01\xff\xff\xff\xff\x02\n'
    b'\x0e\xc6&\xa1\x92\xae6\x0b\x02i\xfe-\xe5\xbao\x05\xd1\xe7\x00'
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x01F'
    b'\x13\x00\x00\x00\x00\x01\xec\x00\x00\x03\x06\x00\x00\x00\x01'
    b'\x00\x00\x00\x03\x00\x00\x00\x02\xff\xff\xff\xff\x12\xcb\xeby1'
    b'\xb6\r\x98B\xcb\x07\xbd`\x8f\x92\xd9\xc4\x84\xbdK\x00\x00\x00'
    b'\x00\x00\x00\x00\x00\x00\x00\x00\x00'
    )

def parse_index2(data, inline):
    index, chunkcache = parsers.parse_index2(data, inline)
    return list(index), chunkcache

def importparsers(hexversion):
    """Import mercurial.parsers with the given sys.hexversion."""
    # The file parsers.c inspects sys.hexversion to determine the version
    # of the currently-running Python interpreter, so we monkey-patch
    # sys.hexversion to simulate using different versions.
    code = ("import sys; sys.hexversion=%s; "
            "import mercurial.cext.parsers" % hexversion)
    cmd = "python -c \"%s\"" % code
    # We need to do these tests inside a subprocess because parser.c's
    # version-checking code happens inside the module init function, and
    # when using reload() to reimport an extension module, "The init function
    # of extension modules is not called a second time"
    # (from http://docs.python.org/2/library/functions.html?#reload).
    p = subprocess.Popen(cmd, shell=True,
                         stdout=subprocess.PIPE, stderr=subprocess.STDOUT)
    return p.communicate()  # returns stdout, stderr

def hexfailmsg(testnumber, hexversion, stdout, expected):
    try:
        hexstring = hex(hexversion)
    except TypeError:
        hexstring = None
    return ("FAILED: version test #%s with Python %s and patched "
            "sys.hexversion %r (%r):\n Expected %s but got:\n-->'%s'\n" %
            (testnumber, sys.version_info, hexversion, hexstring, expected,
             stdout))

def makehex(major, minor, micro):
    return int("%x%02x%02x00" % (major, minor, micro), 16)

class parseindex2tests(unittest.TestCase):

    def assertversionokay(self, testnumber, hexversion):
        stdout, stderr = importparsers(hexversion)
        self.assertFalse(
            stdout, hexfailmsg(testnumber, hexversion, stdout, 'no stdout'))

    def assertversionfail(self, testnumber, hexversion):
        stdout, stderr = importparsers(hexversion)
        # We include versionerrortext to distinguish from other ImportErrors.
        errtext = b"ImportError: %s" % pycompat.sysbytes(
            parsers.versionerrortext)
        self.assertIn(errtext, stdout,
                      hexfailmsg(testnumber, hexversion, stdout,
                                 expected="stdout to contain %r" % errtext))

    def testversiondetection(self):
        """Check the version-detection logic when importing parsers."""
        # Only test the version-detection logic if it is present.
        try:
            parsers.versionerrortext
        except AttributeError:
            return
        info = sys.version_info
        major, minor, micro = info[0], info[1], info[2]
        # Test same major-minor versions.
        self.assertversionokay(1, makehex(major, minor, micro))
        self.assertversionokay(2, makehex(major, minor, micro + 1))
        # Test different major-minor versions.
        self.assertversionfail(3, makehex(major + 1, minor, micro))
        self.assertversionfail(4, makehex(major, minor + 1, micro))
        self.assertversionfail(5, "'foo'")

    def testbadargs(self):
        # Check that parse_index2() raises TypeError on bad arguments.
        with self.assertRaises(TypeError):
            parse_index2(0, True)

    def testparseindexfile(self):
        # Check parsers.parse_index2() on an index file against the
        # original Python implementation of parseindex, both with and
        # without inlined data.

        want = py_parseindex(data_inlined, True)
        got = parse_index2(data_inlined, True)
        self.assertEqual(want, got) # inline data

        want = py_parseindex(data_non_inlined, False)
        got = parse_index2(data_non_inlined, False)
        self.assertEqual(want, got) # no inline data

        ix = parsers.parse_index2(data_inlined, True)[0]
        for i, r in enumerate(ix):
            if r[7] == nullid:
                i = -1
            try:
                self.assertEqual(
                    ix[r[7]], i,
                    'Reverse lookup inconsistent for %r' % nodemod.hex(r[7]))
            except TypeError:
                # pure version doesn't support this
                break

    def testminusone(self):
        want = (0, 0, 0, -1, -1, -1, -1, nullid)
        index, junk = parsers.parse_index2(data_inlined, True)
        got = index[-1]
        self.assertEqual(want, got) # inline data

        index, junk = parsers.parse_index2(data_non_inlined, False)
        got = index[-1]
        self.assertEqual(want, got) # no inline data

if __name__ == '__main__':
    import silenttestrunner
    silenttestrunner.main(__name__)