view tests/test-dirstate-race.t @ 34857:84c6b9384d6a

log: add -L/--line-range option to follow file history by line range

We add an experimental -L/--line-range option to 'hg log' taking file patterns
along with a line range using the (new) FILE,FROMLINE-TOLINE syntax where FILE
may be a pattern (matching exactly one file). The resulting history is similar
to what the "followlines" revset except that, if --patch is specified,
only diff hunks within specified line range are shown.

Basically, this brings the CLI on par with what currently only exists in hgweb
through line selection in "file" and "annotate" views resulting in a file log
with filtered patch to only display followed line range.

The option may be specified multiple times and can be combined with --rev and
regular file patterns to further restrict revisions. Usage of this option
requires --follow; revisions are shown in descending order and renames are
followed. Only the --graph option is currently not supported.

The UI is the result of a consensus from review feedback at:

  https://www.mercurial-scm.org/pipermail/mercurial-devel/2017-October/106749.html


The implementation spreads between commands.log() and cmdutil module.
In commands.log(), the main loop may now use a "hunksfilter" factory (similar
to "filematcher") that, for a given "rev", produces a filtering function
for diff hunks for a given file context object.
The logic to build revisions from -L/--line-range options lives in
cmdutil.getloglinerangerevs() which produces "revs", "filematcher" and
"hunksfilter" information. Revisions obtained by following files' line range
are filtered if they do not match the revset specified by --rev option. If
regular FILE arguments are passed along with -L options, both filematchers are
combined into a new matcher.

.. feature::

   Add an experimental -L/--line-range FILE,FROMLINE-TOLINE option to 'hg log'
   command to follow the history of files by line range. In combination with
   -p/--patch option, only diff hunks within specified line range will be
   displayed. Feedback, especially on UX aspects, is welcome.

  $ hg init repo
  $ cd repo
  $ echo a > a
  $ hg add a
  $ hg commit -m test

Do we ever miss a sub-second change?:

  $ for i in 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20; do
  >     hg co -qC 0
  >     echo b > a
  >     hg st
  > done
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a
  M a

  $ echo test > b
  $ mkdir dir1
  $ echo test > dir1/c
  $ echo test > d

  $ echo test > e
#if execbit
A directory will typically have the execute bit -- make sure it doesn't get
confused with a file with the exec bit set
  $ chmod +x e
#endif

  $ hg add b dir1 d e
  adding dir1/c (glob)
  $ hg commit -m test2

  $ cat >> $TESTTMP/dirstaterace.py << EOF
  > from mercurial import (
  >     context,
  >     extensions,
  > )
  > def extsetup():
  >     extensions.wrapfunction(context.workingctx, '_checklookup', overridechecklookup)
  > def overridechecklookup(orig, self, files):
  >     # make an update that changes the dirstate from underneath
  >     self._repo.ui.system(r"sh '$TESTTMP/dirstaterace.sh'",
  >                          cwd=self._repo.root)
  >     return orig(self, files)
  > EOF

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

XXX Note that this returns M for files that got replaced by directories. This is
definitely a bug, but the fix for that is hard and the next status run is fine
anyway.

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm b && rm -r dir1 && rm d && mkdir d && rm e && mkdir e
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py
  M d
  M e
  ! b
  ! dir1/c
  $ hg debugdirstate
  n 644          2 * a (glob)
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ hg status
  ! b
  ! d
  ! dir1/c
  ! e

  $ rmdir d e
  $ hg update -C -q .

Test that dirstate changes aren't written out at the end of "hg
status", if .hg/dirstate is already changed simultaneously before
acquisition of wlock in workingctx._poststatusfixup().

This avoidance is important to keep consistency of dirstate in race
condition (see issue5584 for detail).

  $ hg parents -q
  1:* (glob)

  $ hg debugrebuilddirstate
  $ hg debugdirstate
  n   0         -1 unset               a
  n   0         -1 unset               b
  n   0         -1 unset               d
  n   0         -1 unset               dir1/c
  n   0         -1 unset               e

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > # This script assumes timetable of typical issue5584 case below:
  > #
  > # 1. "hg status" loads .hg/dirstate
  > # 2. "hg status" confirms clean-ness of FILE
  > # 3. "hg update -C 0" updates the working directory simultaneously
  > #    (FILE is removed, and FILE is dropped from .hg/dirstate)
  > # 4. "hg status" acquires wlock
  > #    (.hg/dirstate is re-loaded = no FILE entry in dirstate)
  > # 5. "hg status" marks FILE in dirstate as clean
  > #    (FILE entry is added to in-memory dirstate)
  > # 6. "hg status" writes dirstate changes into .hg/dirstate
  > #    (FILE entry is written into .hg/dirstate)
  > #
  > # To reproduce similar situation easily and certainly, #2 and #3
  > # are swapped.  "hg cat" below ensures #2 on "hg status" side.
  > 
  > hg update -q -C 0
  > hg cat -r 1 b > b
  > EOF

"hg status" below should excludes "e", of which exec flag is set, for
portability of test scenario, because unsure but missing "e" is
treated differently in _checklookup() according to runtime platform.

- "missing(!)" on POSIX, "pctx[f].cmp(self[f])" raises ENOENT
- "modified(M)" on Windows, "self.flags(f) != pctx.flags(f)" is True

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug -X path:e
  skip updating dirstate: identity mismatch
  M a
  ! d
  ! dir1/c

  $ hg parents -q
  0:* (glob)
  $ hg files
  a
  $ hg debugdirstate
  n * * * a (glob)

  $ rm b

#if fsmonitor

Create fsmonitor state.

  $ hg status
  $ f --type .hg/fsmonitor.state
  .hg/fsmonitor.state: file

Test that invalidating fsmonitor state in the middle (which doesn't require the
wlock) causes the fsmonitor update to be skipped.
hg debugrebuilddirstate ensures that the dirstaterace hook will be called, but
it also invalidates the fsmonitor state. So back it up and restore it.

  $ mv .hg/fsmonitor.state .hg/fsmonitor.state.tmp
  $ hg debugrebuilddirstate
  $ mv .hg/fsmonitor.state.tmp .hg/fsmonitor.state

  $ cat > $TESTTMP/dirstaterace.sh <<EOF
  > rm .hg/fsmonitor.state
  > EOF

  $ hg status --config extensions.dirstaterace=$TESTTMP/dirstaterace.py --debug
  skip updating fsmonitor.state: identity mismatch
  $ f .hg/fsmonitor.state
  .hg/fsmonitor.state: file not found

#endif

Set up a rebase situation for issue5581.

  $ echo c2 > a
  $ echo c2 > b
  $ hg add b
  $ hg commit -m c2
  created new head
  $ echo c3 >> a
  $ hg commit -m c3
  $ hg update 2
  1 files updated, 0 files merged, 0 files removed, 0 files unresolved
  $ echo c4 >> a
  $ echo c4 >> b
  $ hg commit -m c4
  created new head

Configure a merge tool that runs status in the middle of the rebase. The goal of
the status call is to trigger a potential bug if fsmonitor's state is written
even though the wlock is held by another process. The output of 'hg status' in
the merge tool goes to /dev/null because we're more interested in the results of
'hg status' run after the rebase.

  $ cat >> $TESTTMP/mergetool-race.sh << EOF
  > echo "custom merge tool"
  > printf "c2\nc3\nc4\n" > \$1
  > hg --cwd "$TESTTMP/repo" status > /dev/null
  > echo "custom merge tool end"
  > EOF
  $ cat >> $HGRCPATH << EOF
  > [extensions]
  > rebase =
  > [merge-tools]
  > test.executable=sh
  > test.args=$TESTTMP/mergetool-race.sh \$output
  > EOF

  $ hg rebase -s . -d 3 --tool test
  rebasing 4:b08445fd6b2a "c4" (tip)
  merging a
  custom merge tool
  custom merge tool end
  saved backup bundle to $TESTTMP/repo/.hg/strip-backup/* (glob)

This hg status should be empty, whether or not fsmonitor is enabled (issue5581).

  $ hg status