view mercurial/dispatch.py @ 46490:86b019899737 stable

hooks: forbid ':' in hook name

The `:` character is a special separator in the config and it seems same do to
the same for hooks. This is necessary to improve the experience around the
HGPLAIN behavior change in 5.7. See next changesets for details.

Differential Revision: https://phab.mercurial-scm.org/D9978

# dispatch.py - command dispatching for mercurial
#
# Copyright 2005-2007 Matt Mackall <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

from __future__ import absolute_import, print_function

import errno
import getopt
import io
import os
import pdb
import re
import signal
import sys
import traceback


from .i18n import _
from .pycompat import getattr

from hgdemandimport import tracing

from . import (
    cmdutil,
    color,
    commands,
    demandimport,
    encoding,
    error,
    extensions,
    fancyopts,
    help,
    hg,
    hook,
    localrepo,
    profiling,
    pycompat,
    rcutil,
    registrar,
    requirements as requirementsmod,
    scmutil,
    ui as uimod,
    util,
    vfs,
)

from .utils import (
    procutil,
    stringutil,
)


class request(object):
    def __init__(
        self,
        args,
        ui=None,
        repo=None,
        fin=None,
        fout=None,
        ferr=None,
        fmsg=None,
        prereposetups=None,
    ):
        self.args = args
        self.ui = ui
        self.repo = repo

        # input/output/error streams
        self.fin = fin
        self.fout = fout
        self.ferr = ferr
        # separate stream for status/error messages
        self.fmsg = fmsg

        # remember options pre-parsed by _earlyparseopts()
        self.earlyoptions = {}

        # reposetups which run before extensions, useful for chg to pre-fill
        # low-level repo state (for example, changelog) before extensions.
        self.prereposetups = prereposetups or []

        # store the parsed and canonical command
        self.canonical_command = None

    def _runexithandlers(self):
        exc = None
        handlers = self.ui._exithandlers
        try:
            while handlers:
                func, args, kwargs = handlers.pop()
                try:
                    func(*args, **kwargs)
                except:  # re-raises below
                    if exc is None:
                        exc = sys.exc_info()[1]
                    self.ui.warnnoi18n(b'error in exit handlers:\n')
                    self.ui.traceback(force=True)
        finally:
            if exc is not None:
                raise exc


def _flushstdio(ui, err):
    status = None
    # In all cases we try to flush stdio streams.
    if util.safehasattr(ui, b'fout'):
        assert ui is not None  # help pytype
        assert ui.fout is not None  # help pytype
        try:
            ui.fout.flush()
        except IOError as e:
            err = e
            status = -1

    if util.safehasattr(ui, b'ferr'):
        assert ui is not None  # help pytype
        assert ui.ferr is not None  # help pytype
        try:
            if err is not None and err.errno != errno.EPIPE:
                ui.ferr.write(
                    b'abort: %s\n' % encoding.strtolocal(err.strerror)
                )
            ui.ferr.flush()
        # There's not much we can do about an I/O error here. So (possibly)
        # change the status code and move on.
        except IOError:
            status = -1

    return status


def run():
    """run the command in sys.argv"""
    try:
        initstdio()
        with tracing.log('parse args into request'):
            req = request(pycompat.sysargv[1:])

        status = dispatch(req)
        _silencestdio()
    except KeyboardInterrupt:
        # Catch early/late KeyboardInterrupt as last ditch. Here nothing will
        # be printed to console to avoid another IOError/KeyboardInterrupt.
        status = -1
    sys.exit(status & 255)


if pycompat.ispy3:

    def initstdio():
        # stdio streams on Python 3 are io.TextIOWrapper instances proxying another
        # buffer. These streams will normalize \n to \r\n by default. Mercurial's
        # preferred mechanism for writing output (ui.write()) uses io.BufferedWriter
        # instances, which write to the underlying stdio file descriptor in binary
        # mode. ui.write() uses \n for line endings and no line ending normalization
        # is attempted through this interface. This "just works," even if the system
        # preferred line ending is not \n.
        #
        # But some parts of Mercurial (e.g. hooks) can still send data to sys.stdout
        # and sys.stderr. They will inherit the line ending normalization settings,
        # potentially causing e.g. \r\n to be emitted. Since emitting \n should
        # "just work," here we change the sys.* streams to disable line ending
        # normalization, ensuring compatibility with our ui type.

        if sys.stdout is not None:
            # write_through is new in Python 3.7.
            kwargs = {
                "newline": "\n",
                "line_buffering": sys.stdout.line_buffering,
            }
            if util.safehasattr(sys.stdout, "write_through"):
                kwargs["write_through"] = sys.stdout.write_through
            sys.stdout = io.TextIOWrapper(
                sys.stdout.buffer,
                sys.stdout.encoding,
                sys.stdout.errors,
                **kwargs
            )

        if sys.stderr is not None:
            kwargs = {
                "newline": "\n",
                "line_buffering": sys.stderr.line_buffering,
            }
            if util.safehasattr(sys.stderr, "write_through"):
                kwargs["write_through"] = sys.stderr.write_through
            sys.stderr = io.TextIOWrapper(
                sys.stderr.buffer,
                sys.stderr.encoding,
                sys.stderr.errors,
                **kwargs
            )

        if sys.stdin is not None:
            # No write_through on read-only stream.
            sys.stdin = io.TextIOWrapper(
                sys.stdin.buffer,
                sys.stdin.encoding,
                sys.stdin.errors,
                # None is universal newlines mode.
                newline=None,
                line_buffering=sys.stdin.line_buffering,
            )

    def _silencestdio():
        for fp in (sys.stdout, sys.stderr):
            if fp is None:
                continue
            # Check if the file is okay
            try:
                fp.flush()
                continue
            except IOError:
                pass
            # Otherwise mark it as closed to silence "Exception ignored in"
            # message emitted by the interpreter finalizer.
            try:
                fp.close()
            except IOError:
                pass


else:

    def initstdio():
        for fp in (sys.stdin, sys.stdout, sys.stderr):
            procutil.setbinary(fp)

    def _silencestdio():
        pass


def _formatargs(args):
    return b' '.join(procutil.shellquote(a) for a in args)


def dispatch(req):
    """run the command specified in req.args; returns an integer status code"""
    err = None
    try:
        status = _rundispatch(req)
    except error.StdioError as e:
        err = e
        status = -1

    ret = _flushstdio(req.ui, err)
    if ret:
        status = ret
    return status


def _rundispatch(req):
    with tracing.log('dispatch._rundispatch'):
        if req.ferr:
            ferr = req.ferr
        elif req.ui:
            ferr = req.ui.ferr
        else:
            ferr = procutil.stderr

        try:
            if not req.ui:
                req.ui = uimod.ui.load()
            req.earlyoptions.update(_earlyparseopts(req.ui, req.args))
            if req.earlyoptions[b'traceback']:
                req.ui.setconfig(b'ui', b'traceback', b'on', b'--traceback')

            # set ui streams from the request
            if req.fin:
                req.ui.fin = req.fin
            if req.fout:
                req.ui.fout = req.fout
            if req.ferr:
                req.ui.ferr = req.ferr
            if req.fmsg:
                req.ui.fmsg = req.fmsg
        except error.Abort as inst:
            ferr.write(inst.format())
            return -1

        msg = _formatargs(req.args)
        starttime = util.timer()
        ret = 1  # default of Python exit code on unhandled exception
        try:
            ret = _runcatch(req) or 0
        except error.ProgrammingError as inst:
            req.ui.error(_(b'** ProgrammingError: %s\n') % inst)
            if inst.hint:
                req.ui.error(_(b'** (%s)\n') % inst.hint)
            raise
        except KeyboardInterrupt as inst:
            try:
                if isinstance(inst, error.SignalInterrupt):
                    msg = _(b"killed!\n")
                else:
                    msg = _(b"interrupted!\n")
                req.ui.error(msg)
            except error.SignalInterrupt:
                # maybe pager would quit without consuming all the output, and
                # SIGPIPE was raised. we cannot print anything in this case.
                pass
            except IOError as inst:
                if inst.errno != errno.EPIPE:
                    raise
            ret = -1
        finally:
            duration = util.timer() - starttime
            req.ui.flush()  # record blocked times
            if req.ui.logblockedtimes:
                req.ui._blockedtimes[b'command_duration'] = duration * 1000
                req.ui.log(
                    b'uiblocked',
                    b'ui blocked ms\n',
                    **pycompat.strkwargs(req.ui._blockedtimes)
                )
            return_code = ret & 255
            req.ui.log(
                b"commandfinish",
                b"%s exited %d after %0.2f seconds\n",
                msg,
                return_code,
                duration,
                return_code=return_code,
                duration=duration,
                canonical_command=req.canonical_command,
            )
            try:
                req._runexithandlers()
            except:  # exiting, so no re-raises
                ret = ret or -1
            # do flush again since ui.log() and exit handlers may write to ui
            req.ui.flush()
        return ret


def _runcatch(req):
    with tracing.log('dispatch._runcatch'):

        def catchterm(*args):
            raise error.SignalInterrupt

        ui = req.ui
        try:
            for name in b'SIGBREAK', b'SIGHUP', b'SIGTERM':
                num = getattr(signal, name, None)
                if num:
                    signal.signal(num, catchterm)
        except ValueError:
            pass  # happens if called in a thread

        def _runcatchfunc():
            realcmd = None
            try:
                cmdargs = fancyopts.fancyopts(
                    req.args[:], commands.globalopts, {}
                )
                cmd = cmdargs[0]
                aliases, entry = cmdutil.findcmd(cmd, commands.table, False)
                realcmd = aliases[0]
            except (
                error.UnknownCommand,
                error.AmbiguousCommand,
                IndexError,
                getopt.GetoptError,
            ):
                # Don't handle this here. We know the command is
                # invalid, but all we're worried about for now is that
                # it's not a command that server operators expect to
                # be safe to offer to users in a sandbox.
                pass
            if realcmd == b'serve' and b'--stdio' in cmdargs:
                # We want to constrain 'hg serve --stdio' instances pretty
                # closely, as many shared-ssh access tools want to grant
                # access to run *only* 'hg -R $repo serve --stdio'. We
                # restrict to exactly that set of arguments, and prohibit
                # any repo name that starts with '--' to prevent
                # shenanigans wherein a user does something like pass
                # --debugger or --config=ui.debugger=1 as a repo
                # name. This used to actually run the debugger.
                if (
                    len(req.args) != 4
                    or req.args[0] != b'-R'
                    or req.args[1].startswith(b'--')
                    or req.args[2] != b'serve'
                    or req.args[3] != b'--stdio'
                ):
                    raise error.Abort(
                        _(b'potentially unsafe serve --stdio invocation: %s')
                        % (stringutil.pprint(req.args),)
                    )

            try:
                debugger = b'pdb'
                debugtrace = {b'pdb': pdb.set_trace}
                debugmortem = {b'pdb': pdb.post_mortem}

                # read --config before doing anything else
                # (e.g. to change trust settings for reading .hg/hgrc)
                cfgs = _parseconfig(req.ui, req.earlyoptions[b'config'])

                if req.repo:
                    # copy configs that were passed on the cmdline (--config) to
                    # the repo ui
                    for sec, name, val in cfgs:
                        req.repo.ui.setconfig(
                            sec, name, val, source=b'--config'
                        )

                # developer config: ui.debugger
                debugger = ui.config(b"ui", b"debugger")
                debugmod = pdb
                if not debugger or ui.plain():
                    # if we are in HGPLAIN mode, then disable custom debugging
                    debugger = b'pdb'
                elif req.earlyoptions[b'debugger']:
                    # This import can be slow for fancy debuggers, so only
                    # do it when absolutely necessary, i.e. when actual
                    # debugging has been requested
                    with demandimport.deactivated():
                        try:
                            debugmod = __import__(debugger)
                        except ImportError:
                            pass  # Leave debugmod = pdb

                debugtrace[debugger] = debugmod.set_trace
                debugmortem[debugger] = debugmod.post_mortem

                # enter the debugger before command execution
                if req.earlyoptions[b'debugger']:
                    ui.warn(
                        _(
                            b"entering debugger - "
                            b"type c to continue starting hg or h for help\n"
                        )
                    )

                    if (
                        debugger != b'pdb'
                        and debugtrace[debugger] == debugtrace[b'pdb']
                    ):
                        ui.warn(
                            _(
                                b"%s debugger specified "
                                b"but its module was not found\n"
                            )
                            % debugger
                        )
                    with demandimport.deactivated():
                        debugtrace[debugger]()
                try:
                    return _dispatch(req)
                finally:
                    ui.flush()
            except:  # re-raises
                # enter the debugger when we hit an exception
                if req.earlyoptions[b'debugger']:
                    traceback.print_exc()
                    debugmortem[debugger](sys.exc_info()[2])
                raise

        return _callcatch(ui, _runcatchfunc)


def _callcatch(ui, func):
    """like scmutil.callcatch but handles more high-level exceptions about
    config parsing and commands. besides, use handlecommandexception to handle
    uncaught exceptions.
    """
    detailed_exit_code = -1
    try:
        return scmutil.callcatch(ui, func)
    except error.AmbiguousCommand as inst:
        detailed_exit_code = 10
        ui.warn(
            _(b"hg: command '%s' is ambiguous:\n    %s\n")
            % (inst.prefix, b" ".join(inst.matches))
        )
    except error.CommandError as inst:
        detailed_exit_code = 10
        if inst.command:
            ui.pager(b'help')
            msgbytes = pycompat.bytestr(inst.message)
            ui.warn(_(b"hg %s: %s\n") % (inst.command, msgbytes))
            commands.help_(ui, inst.command, full=False, command=True)
        else:
            ui.warn(_(b"hg: %s\n") % inst.message)
            ui.warn(_(b"(use 'hg help -v' for a list of global options)\n"))
    except error.UnknownCommand as inst:
        detailed_exit_code = 10
        nocmdmsg = _(b"hg: unknown command '%s'\n") % inst.command
        try:
            # check if the command is in a disabled extension
            # (but don't check for extensions themselves)
            formatted = help.formattedhelp(
                ui, commands, inst.command, unknowncmd=True
            )
            ui.warn(nocmdmsg)
            ui.write(formatted)
        except (error.UnknownCommand, error.Abort):
            suggested = False
            if inst.all_commands:
                sim = error.getsimilar(inst.all_commands, inst.command)
                if sim:
                    ui.warn(nocmdmsg)
                    ui.warn(b"(%s)\n" % error.similarity_hint(sim))
                    suggested = True
            if not suggested:
                ui.warn(nocmdmsg)
                ui.warn(_(b"(use 'hg help' for a list of commands)\n"))
    except IOError:
        raise
    except KeyboardInterrupt:
        raise
    except:  # probably re-raises
        if not handlecommandexception(ui):
            raise

    if ui.configbool(b'ui', b'detailed-exit-code'):
        return detailed_exit_code
    else:
        return -1


def aliasargs(fn, givenargs):
    args = []
    # only care about alias 'args', ignore 'args' set by extensions.wrapfunction
    if not util.safehasattr(fn, b'_origfunc'):
        args = getattr(fn, 'args', args)
    if args:
        cmd = b' '.join(map(procutil.shellquote, args))

        nums = []

        def replacer(m):
            num = int(m.group(1)) - 1
            nums.append(num)
            if num < len(givenargs):
                return givenargs[num]
            raise error.InputError(_(b'too few arguments for command alias'))

        cmd = re.sub(br'\$(\d+|\$)', replacer, cmd)
        givenargs = [x for i, x in enumerate(givenargs) if i not in nums]
        args = pycompat.shlexsplit(cmd)
    return args + givenargs


def aliasinterpolate(name, args, cmd):
    """interpolate args into cmd for shell aliases

    This also handles $0, $@ and "$@".
    """
    # util.interpolate can't deal with "$@" (with quotes) because it's only
    # built to match prefix + patterns.
    replacemap = {b'$%d' % (i + 1): arg for i, arg in enumerate(args)}
    replacemap[b'$0'] = name
    replacemap[b'$$'] = b'$'
    replacemap[b'$@'] = b' '.join(args)
    # Typical Unix shells interpolate "$@" (with quotes) as all the positional
    # parameters, separated out into words. Emulate the same behavior here by
    # quoting the arguments individually. POSIX shells will then typically
    # tokenize each argument into exactly one word.
    replacemap[b'"$@"'] = b' '.join(procutil.shellquote(arg) for arg in args)
    # escape '\$' for regex
    regex = b'|'.join(replacemap.keys()).replace(b'$', br'\$')
    r = re.compile(regex)
    return r.sub(lambda x: replacemap[x.group()], cmd)


class cmdalias(object):
    def __init__(self, ui, name, definition, cmdtable, source):
        self.name = self.cmd = name
        self.cmdname = b''
        self.definition = definition
        self.fn = None
        self.givenargs = []
        self.opts = []
        self.help = b''
        self.badalias = None
        self.unknowncmd = False
        self.source = source

        try:
            aliases, entry = cmdutil.findcmd(self.name, cmdtable)
            for alias, e in pycompat.iteritems(cmdtable):
                if e is entry:
                    self.cmd = alias
                    break
            self.shadows = True
        except error.UnknownCommand:
            self.shadows = False

        if not self.definition:
            self.badalias = _(b"no definition for alias '%s'") % self.name
            return

        if self.definition.startswith(b'!'):
            shdef = self.definition[1:]
            self.shell = True

            def fn(ui, *args):
                env = {b'HG_ARGS': b' '.join((self.name,) + args)}

                def _checkvar(m):
                    if m.groups()[0] == b'$':
                        return m.group()
                    elif int(m.groups()[0]) <= len(args):
                        return m.group()
                    else:
                        ui.debug(
                            b"No argument found for substitution "
                            b"of %i variable in alias '%s' definition.\n"
                            % (int(m.groups()[0]), self.name)
                        )
                        return b''

                cmd = re.sub(br'\$(\d+|\$)', _checkvar, shdef)
                cmd = aliasinterpolate(self.name, args, cmd)
                return ui.system(
                    cmd, environ=env, blockedtag=b'alias_%s' % self.name
                )

            self.fn = fn
            self.alias = True
            self._populatehelp(ui, name, shdef, self.fn)
            return

        try:
            args = pycompat.shlexsplit(self.definition)
        except ValueError as inst:
            self.badalias = _(b"error in definition for alias '%s': %s") % (
                self.name,
                stringutil.forcebytestr(inst),
            )
            return
        earlyopts, args = _earlysplitopts(args)
        if earlyopts:
            self.badalias = _(
                b"error in definition for alias '%s': %s may "
                b"only be given on the command line"
            ) % (self.name, b'/'.join(pycompat.ziplist(*earlyopts)[0]))
            return
        self.cmdname = cmd = args.pop(0)
        self.givenargs = args

        try:
            tableentry = cmdutil.findcmd(cmd, cmdtable, False)[1]
            if len(tableentry) > 2:
                self.fn, self.opts, cmdhelp = tableentry
            else:
                self.fn, self.opts = tableentry
                cmdhelp = None

            self.alias = True
            self._populatehelp(ui, name, cmd, self.fn, cmdhelp)

        except error.UnknownCommand:
            self.badalias = _(
                b"alias '%s' resolves to unknown command '%s'"
            ) % (
                self.name,
                cmd,
            )
            self.unknowncmd = True
        except error.AmbiguousCommand:
            self.badalias = _(
                b"alias '%s' resolves to ambiguous command '%s'"
            ) % (
                self.name,
                cmd,
            )

    def _populatehelp(self, ui, name, cmd, fn, defaulthelp=None):
        # confine strings to be passed to i18n.gettext()
        cfg = {}
        for k in (b'doc', b'help', b'category'):
            v = ui.config(b'alias', b'%s:%s' % (name, k), None)
            if v is None:
                continue
            if not encoding.isasciistr(v):
                self.badalias = _(
                    b"non-ASCII character in alias definition '%s:%s'"
                ) % (name, k)
                return
            cfg[k] = v

        self.help = cfg.get(b'help', defaulthelp or b'')
        if self.help and self.help.startswith(b"hg " + cmd):
            # drop prefix in old-style help lines so hg shows the alias
            self.help = self.help[4 + len(cmd) :]

        self.owndoc = b'doc' in cfg
        doc = cfg.get(b'doc', pycompat.getdoc(fn))
        if doc is not None:
            doc = pycompat.sysstr(doc)
        self.__doc__ = doc

        self.helpcategory = cfg.get(
            b'category', registrar.command.CATEGORY_NONE
        )

    @property
    def args(self):
        args = pycompat.maplist(util.expandpath, self.givenargs)
        return aliasargs(self.fn, args)

    def __getattr__(self, name):
        adefaults = {
            'norepo': True,
            'intents': set(),
            'optionalrepo': False,
            'inferrepo': False,
        }
        if name not in adefaults:
            raise AttributeError(name)
        if self.badalias or util.safehasattr(self, b'shell'):
            return adefaults[name]
        return getattr(self.fn, name)

    def __call__(self, ui, *args, **opts):
        if self.badalias:
            hint = None
            if self.unknowncmd:
                try:
                    # check if the command is in a disabled extension
                    cmd, ext = extensions.disabledcmd(ui, self.cmdname)[:2]
                    hint = _(b"'%s' is provided by '%s' extension") % (cmd, ext)
                except error.UnknownCommand:
                    pass
            raise error.ConfigError(self.badalias, hint=hint)
        if self.shadows:
            ui.debug(
                b"alias '%s' shadows command '%s'\n" % (self.name, self.cmdname)
            )

        ui.log(
            b'commandalias',
            b"alias '%s' expands to '%s'\n",
            self.name,
            self.definition,
        )
        if util.safehasattr(self, b'shell'):
            return self.fn(ui, *args, **opts)
        else:
            try:
                return util.checksignature(self.fn)(ui, *args, **opts)
            except error.SignatureError:
                args = b' '.join([self.cmdname] + self.args)
                ui.debug(b"alias '%s' expands to '%s'\n" % (self.name, args))
                raise


class lazyaliasentry(object):
    """like a typical command entry (func, opts, help), but is lazy"""

    def __init__(self, ui, name, definition, cmdtable, source):
        self.ui = ui
        self.name = name
        self.definition = definition
        self.cmdtable = cmdtable.copy()
        self.source = source
        self.alias = True

    @util.propertycache
    def _aliasdef(self):
        return cmdalias(
            self.ui, self.name, self.definition, self.cmdtable, self.source
        )

    def __getitem__(self, n):
        aliasdef = self._aliasdef
        if n == 0:
            return aliasdef
        elif n == 1:
            return aliasdef.opts
        elif n == 2:
            return aliasdef.help
        else:
            raise IndexError

    def __iter__(self):
        for i in range(3):
            yield self[i]

    def __len__(self):
        return 3


def addaliases(ui, cmdtable):
    # aliases are processed after extensions have been loaded, so they
    # may use extension commands. Aliases can also use other alias definitions,
    # but only if they have been defined prior to the current definition.
    for alias, definition in ui.configitems(b'alias', ignoresub=True):
        try:
            if cmdtable[alias].definition == definition:
                continue
        except (KeyError, AttributeError):
            # definition might not exist or it might not be a cmdalias
            pass

        source = ui.configsource(b'alias', alias)
        entry = lazyaliasentry(ui, alias, definition, cmdtable, source)
        cmdtable[alias] = entry


def _parse(ui, args):
    options = {}
    cmdoptions = {}

    try:
        args = fancyopts.fancyopts(args, commands.globalopts, options)
    except getopt.GetoptError as inst:
        raise error.CommandError(None, stringutil.forcebytestr(inst))

    if args:
        cmd, args = args[0], args[1:]
        aliases, entry = cmdutil.findcmd(
            cmd, commands.table, ui.configbool(b"ui", b"strict")
        )
        cmd = aliases[0]
        args = aliasargs(entry[0], args)
        defaults = ui.config(b"defaults", cmd)
        if defaults:
            args = (
                pycompat.maplist(util.expandpath, pycompat.shlexsplit(defaults))
                + args
            )
        c = list(entry[1])
    else:
        cmd = None
        c = []

    # combine global options into local
    for o in commands.globalopts:
        c.append((o[0], o[1], options[o[1]], o[3]))

    try:
        args = fancyopts.fancyopts(args, c, cmdoptions, gnu=True)
    except getopt.GetoptError as inst:
        raise error.CommandError(cmd, stringutil.forcebytestr(inst))

    # separate global options back out
    for o in commands.globalopts:
        n = o[1]
        options[n] = cmdoptions[n]
        del cmdoptions[n]

    return (cmd, cmd and entry[0] or None, args, options, cmdoptions)


def _parseconfig(ui, config):
    """parse the --config options from the command line"""
    configs = []

    for cfg in config:
        try:
            name, value = [cfgelem.strip() for cfgelem in cfg.split(b'=', 1)]
            section, name = name.split(b'.', 1)
            if not section or not name:
                raise IndexError
            ui.setconfig(section, name, value, b'--config')
            configs.append((section, name, value))
        except (IndexError, ValueError):
            raise error.InputError(
                _(
                    b'malformed --config option: %r '
                    b'(use --config section.name=value)'
                )
                % pycompat.bytestr(cfg)
            )

    return configs


def _earlyparseopts(ui, args):
    options = {}
    fancyopts.fancyopts(
        args,
        commands.globalopts,
        options,
        gnu=not ui.plain(b'strictflags'),
        early=True,
        optaliases={b'repository': [b'repo']},
    )
    return options


def _earlysplitopts(args):
    """Split args into a list of possible early options and remainder args"""
    shortoptions = b'R:'
    # TODO: perhaps 'debugger' should be included
    longoptions = [b'cwd=', b'repository=', b'repo=', b'config=']
    return fancyopts.earlygetopt(
        args, shortoptions, longoptions, gnu=True, keepsep=True
    )


def runcommand(lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions):
    # run pre-hook, and abort if it fails
    hook.hook(
        lui,
        repo,
        b"pre-%s" % cmd,
        True,
        args=b" ".join(fullargs),
        pats=cmdpats,
        opts=cmdoptions,
    )
    try:
        ret = _runcommand(ui, options, cmd, d)
        # run post-hook, passing command result
        hook.hook(
            lui,
            repo,
            b"post-%s" % cmd,
            False,
            args=b" ".join(fullargs),
            result=ret,
            pats=cmdpats,
            opts=cmdoptions,
        )
    except Exception:
        # run failure hook and re-raise
        hook.hook(
            lui,
            repo,
            b"fail-%s" % cmd,
            False,
            args=b" ".join(fullargs),
            pats=cmdpats,
            opts=cmdoptions,
        )
        raise
    return ret


def _readsharedsourceconfig(ui, path):
    """if the current repository is shared one, this tries to read
    .hg/hgrc of shared source if we are in share-safe mode

    Config read is loaded into the ui object passed

    This should be called before reading .hg/hgrc or the main repo
    as that overrides config set in shared source"""
    try:
        with open(os.path.join(path, b".hg", b"requires"), "rb") as fp:
            requirements = set(fp.read().splitlines())
            if not (
                requirementsmod.SHARESAFE_REQUIREMENT in requirements
                and requirementsmod.SHARED_REQUIREMENT in requirements
            ):
                return
            hgvfs = vfs.vfs(os.path.join(path, b".hg"))
            sharedvfs = localrepo._getsharedvfs(hgvfs, requirements)
            root = sharedvfs.base
            ui.readconfig(sharedvfs.join(b"hgrc"), root)
    except IOError:
        pass


def _getlocal(ui, rpath, wd=None):
    """Return (path, local ui object) for the given target path.

    Takes paths in [cwd]/.hg/hgrc into account."
    """
    if wd is None:
        try:
            wd = encoding.getcwd()
        except OSError as e:
            raise error.Abort(
                _(b"error getting current working directory: %s")
                % encoding.strtolocal(e.strerror)
            )

    path = cmdutil.findrepo(wd) or b""
    if not path:
        lui = ui
    else:
        lui = ui.copy()
        if rcutil.use_repo_hgrc():
            _readsharedsourceconfig(lui, path)
            lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path)
            lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path)

    if rpath:
        path = lui.expandpath(rpath)
        lui = ui.copy()
        if rcutil.use_repo_hgrc():
            _readsharedsourceconfig(lui, path)
            lui.readconfig(os.path.join(path, b".hg", b"hgrc"), path)
            lui.readconfig(os.path.join(path, b".hg", b"hgrc-not-shared"), path)

    return path, lui


def _checkshellalias(lui, ui, args):
    """Return the function to run the shell alias, if it is required"""
    options = {}

    try:
        args = fancyopts.fancyopts(args, commands.globalopts, options)
    except getopt.GetoptError:
        return

    if not args:
        return

    cmdtable = commands.table

    cmd = args[0]
    try:
        strict = ui.configbool(b"ui", b"strict")
        aliases, entry = cmdutil.findcmd(cmd, cmdtable, strict)
    except (error.AmbiguousCommand, error.UnknownCommand):
        return

    cmd = aliases[0]
    fn = entry[0]

    if cmd and util.safehasattr(fn, b'shell'):
        # shell alias shouldn't receive early options which are consumed by hg
        _earlyopts, args = _earlysplitopts(args)
        d = lambda: fn(ui, *args[1:])
        return lambda: runcommand(
            lui, None, cmd, args[:1], ui, options, d, [], {}
        )


def _dispatch(req):
    args = req.args
    ui = req.ui

    # check for cwd
    cwd = req.earlyoptions[b'cwd']
    if cwd:
        os.chdir(cwd)

    rpath = req.earlyoptions[b'repository']
    path, lui = _getlocal(ui, rpath)

    uis = {ui, lui}

    if req.repo:
        uis.add(req.repo.ui)

    if (
        req.earlyoptions[b'verbose']
        or req.earlyoptions[b'debug']
        or req.earlyoptions[b'quiet']
    ):
        for opt in (b'verbose', b'debug', b'quiet'):
            val = pycompat.bytestr(bool(req.earlyoptions[opt]))
            for ui_ in uis:
                ui_.setconfig(b'ui', opt, val, b'--' + opt)

    if req.earlyoptions[b'profile']:
        for ui_ in uis:
            ui_.setconfig(b'profiling', b'enabled', b'true', b'--profile')

    profile = lui.configbool(b'profiling', b'enabled')
    with profiling.profile(lui, enabled=profile) as profiler:
        # Configure extensions in phases: uisetup, extsetup, cmdtable, and
        # reposetup
        extensions.loadall(lui)
        # Propagate any changes to lui.__class__ by extensions
        ui.__class__ = lui.__class__

        # (uisetup and extsetup are handled in extensions.loadall)

        # (reposetup is handled in hg.repository)

        addaliases(lui, commands.table)

        # All aliases and commands are completely defined, now.
        # Check abbreviation/ambiguity of shell alias.
        shellaliasfn = _checkshellalias(lui, ui, args)
        if shellaliasfn:
            # no additional configs will be set, set up the ui instances
            for ui_ in uis:
                extensions.populateui(ui_)
            return shellaliasfn()

        # check for fallback encoding
        fallback = lui.config(b'ui', b'fallbackencoding')
        if fallback:
            encoding.fallbackencoding = fallback

        fullargs = args
        cmd, func, args, options, cmdoptions = _parse(lui, args)

        # store the canonical command name in request object for later access
        req.canonical_command = cmd

        if options[b"config"] != req.earlyoptions[b"config"]:
            raise error.InputError(_(b"option --config may not be abbreviated"))
        if options[b"cwd"] != req.earlyoptions[b"cwd"]:
            raise error.InputError(_(b"option --cwd may not be abbreviated"))
        if options[b"repository"] != req.earlyoptions[b"repository"]:
            raise error.InputError(
                _(
                    b"option -R has to be separated from other options (e.g. not "
                    b"-qR) and --repository may only be abbreviated as --repo"
                )
            )
        if options[b"debugger"] != req.earlyoptions[b"debugger"]:
            raise error.InputError(
                _(b"option --debugger may not be abbreviated")
            )
        # don't validate --profile/--traceback, which can be enabled from now

        if options[b"encoding"]:
            encoding.encoding = options[b"encoding"]
        if options[b"encodingmode"]:
            encoding.encodingmode = options[b"encodingmode"]
        if options[b"time"]:

            def get_times():
                t = os.times()
                if t[4] == 0.0:
                    # Windows leaves this as zero, so use time.perf_counter()
                    t = (t[0], t[1], t[2], t[3], util.timer())
                return t

            s = get_times()

            def print_time():
                t = get_times()
                ui.warn(
                    _(b"time: real %.3f secs (user %.3f+%.3f sys %.3f+%.3f)\n")
                    % (
                        t[4] - s[4],
                        t[0] - s[0],
                        t[2] - s[2],
                        t[1] - s[1],
                        t[3] - s[3],
                    )
                )

            ui.atexit(print_time)
        if options[b"profile"]:
            profiler.start()

        # if abbreviated version of this were used, take them in account, now
        if options[b'verbose'] or options[b'debug'] or options[b'quiet']:
            for opt in (b'verbose', b'debug', b'quiet'):
                if options[opt] == req.earlyoptions[opt]:
                    continue
                val = pycompat.bytestr(bool(options[opt]))
                for ui_ in uis:
                    ui_.setconfig(b'ui', opt, val, b'--' + opt)

        if options[b'traceback']:
            for ui_ in uis:
                ui_.setconfig(b'ui', b'traceback', b'on', b'--traceback')

        if options[b'noninteractive']:
            for ui_ in uis:
                ui_.setconfig(b'ui', b'interactive', b'off', b'-y')

        if cmdoptions.get(b'insecure', False):
            for ui_ in uis:
                ui_.insecureconnections = True

        # setup color handling before pager, because setting up pager
        # might cause incorrect console information
        coloropt = options[b'color']
        for ui_ in uis:
            if coloropt:
                ui_.setconfig(b'ui', b'color', coloropt, b'--color')
            color.setup(ui_)

        if stringutil.parsebool(options[b'pager']):
            # ui.pager() expects 'internal-always-' prefix in this case
            ui.pager(b'internal-always-' + cmd)
        elif options[b'pager'] != b'auto':
            for ui_ in uis:
                ui_.disablepager()

        # configs are fully loaded, set up the ui instances
        for ui_ in uis:
            extensions.populateui(ui_)

        if options[b'version']:
            return commands.version_(ui)
        if options[b'help']:
            return commands.help_(ui, cmd, command=cmd is not None)
        elif not cmd:
            return commands.help_(ui, b'shortlist')

        repo = None
        cmdpats = args[:]
        assert func is not None  # help out pytype
        if not func.norepo:
            # use the repo from the request only if we don't have -R
            if not rpath and not cwd:
                repo = req.repo

            if repo:
                # set the descriptors of the repo ui to those of ui
                repo.ui.fin = ui.fin
                repo.ui.fout = ui.fout
                repo.ui.ferr = ui.ferr
                repo.ui.fmsg = ui.fmsg
            else:
                try:
                    repo = hg.repository(
                        ui,
                        path=path,
                        presetupfuncs=req.prereposetups,
                        intents=func.intents,
                    )
                    if not repo.local():
                        raise error.InputError(
                            _(b"repository '%s' is not local") % path
                        )
                    repo.ui.setconfig(
                        b"bundle", b"mainreporoot", repo.root, b'repo'
                    )
                except error.RequirementError:
                    raise
                except error.RepoError:
                    if rpath:  # invalid -R path
                        raise
                    if not func.optionalrepo:
                        if func.inferrepo and args and not path:
                            # try to infer -R from command args
                            repos = pycompat.maplist(cmdutil.findrepo, args)
                            guess = repos[0]
                            if guess and repos.count(guess) == len(repos):
                                req.args = [b'--repository', guess] + fullargs
                                req.earlyoptions[b'repository'] = guess
                                return _dispatch(req)
                        if not path:
                            raise error.InputError(
                                _(
                                    b"no repository found in"
                                    b" '%s' (.hg not found)"
                                )
                                % encoding.getcwd()
                            )
                        raise
            if repo:
                ui = repo.ui
                if options[b'hidden']:
                    repo = repo.unfiltered()
            args.insert(0, repo)
        elif rpath:
            ui.warn(_(b"warning: --repository ignored\n"))

        msg = _formatargs(fullargs)
        ui.log(b"command", b'%s\n', msg)
        strcmdopt = pycompat.strkwargs(cmdoptions)
        d = lambda: util.checksignature(func)(ui, *args, **strcmdopt)
        try:
            return runcommand(
                lui, repo, cmd, fullargs, ui, options, d, cmdpats, cmdoptions
            )
        finally:
            if repo and repo != req.repo:
                repo.close()


def _runcommand(ui, options, cmd, cmdfunc):
    """Run a command function, possibly with profiling enabled."""
    try:
        with tracing.log("Running %s command" % cmd):
            return cmdfunc()
    except error.SignatureError:
        raise error.CommandError(cmd, _(b'invalid arguments'))


def _exceptionwarning(ui):
    """Produce a warning message for the current active exception"""

    # For compatibility checking, we discard the portion of the hg
    # version after the + on the assumption that if a "normal
    # user" is running a build with a + in it the packager
    # probably built from fairly close to a tag and anyone with a
    # 'make local' copy of hg (where the version number can be out
    # of date) will be clueful enough to notice the implausible
    # version number and try updating.
    ct = util.versiontuple(n=2)
    worst = None, ct, b'', b''
    if ui.config(b'ui', b'supportcontact') is None:
        for name, mod in extensions.extensions():
            # 'testedwith' should be bytes, but not all extensions are ported
            # to py3 and we don't want UnicodeException because of that.
            testedwith = stringutil.forcebytestr(
                getattr(mod, 'testedwith', b'')
            )
            version = extensions.moduleversion(mod)
            report = getattr(mod, 'buglink', _(b'the extension author.'))
            if not testedwith.strip():
                # We found an untested extension. It's likely the culprit.
                worst = name, b'unknown', report, version
                break

            # Never blame on extensions bundled with Mercurial.
            if extensions.ismoduleinternal(mod):
                continue

            tested = [util.versiontuple(t, 2) for t in testedwith.split()]
            if ct in tested:
                continue

            lower = [t for t in tested if t < ct]
            nearest = max(lower or tested)
            if worst[0] is None or nearest < worst[1]:
                worst = name, nearest, report, version
    if worst[0] is not None:
        name, testedwith, report, version = worst
        if not isinstance(testedwith, (bytes, str)):
            testedwith = b'.'.join(
                [stringutil.forcebytestr(c) for c in testedwith]
            )
        extver = version or _(b"(version N/A)")
        warning = _(
            b'** Unknown exception encountered with '
            b'possibly-broken third-party extension "%s" %s\n'
            b'** which supports versions %s of Mercurial.\n'
            b'** Please disable "%s" and try your action again.\n'
            b'** If that fixes the bug please report it to %s\n'
        ) % (name, extver, testedwith, name, stringutil.forcebytestr(report))
    else:
        bugtracker = ui.config(b'ui', b'supportcontact')
        if bugtracker is None:
            bugtracker = _(b"https://mercurial-scm.org/wiki/BugTracker")
        warning = (
            _(
                b"** unknown exception encountered, "
                b"please report by visiting\n** "
            )
            + bugtracker
            + b'\n'
        )
    sysversion = pycompat.sysbytes(sys.version).replace(b'\n', b'')

    def ext_with_ver(x):
        ext = x[0]
        ver = extensions.moduleversion(x[1])
        if ver:
            ext += b' ' + ver
        return ext

    warning += (
        (_(b"** Python %s\n") % sysversion)
        + (_(b"** Mercurial Distributed SCM (version %s)\n") % util.version())
        + (
            _(b"** Extensions loaded: %s\n")
            % b", ".join(
                [ext_with_ver(x) for x in sorted(extensions.extensions())]
            )
        )
    )
    return warning


def handlecommandexception(ui):
    """Produce a warning message for broken commands

    Called when handling an exception; the exception is reraised if
    this function returns False, ignored otherwise.
    """
    warning = _exceptionwarning(ui)
    ui.log(
        b"commandexception",
        b"%s\n%s\n",
        warning,
        pycompat.sysbytes(traceback.format_exc()),
    )
    ui.warn(warning)
    return False  # re-raise the exception