rcutil: don't check if defaultrc/ is a directory -- we know it is
`mercurial/defaultrc/` is a directory both in the Mercurial repo and
once installed on a target platform. The directory was created in
c4ce077588d0 (config: introduce "built-in" default configuration
settings in default.d, 2014-09-04). That commit has some more
information, but it still doesn't seem to say that `defaultrc/` (then
called `default.d/`) could be a file. Perhaps the check was there to
allow you to run the same code on an older install/repo?
Differential Revision: https://phab.mercurial-scm.org/D7624
initialize
$ make_changes() {
> d=`pwd`
> [ ! -z $1 ] && cd $1
> echo "test `basename \`pwd\``" >> test
> hg commit -Am"${2:-test}"
> r=$?
> cd $d
> return $r
> }
$ ls -1a
.
..
$ hg init a
$ cd a
$ echo 'test' > test; hg commit -Am'test'
adding test
clone to b
$ mkdir ../b
$ cd ../b
$ hg clone ../a .
updating to branch default
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo "[extensions]" >> .hg/hgrc
$ echo "bookflow=" >> .hg/hgrc
$ hg branch X
abort: creating named branches is disabled and you should use bookmarks
(see 'hg help bookflow')
[255]
$ hg bookmark X
$ hg bookmarks
* X 0:* (glob)
$ hg bookmark X
abort: bookmark X already exists, to move use the --rev option
[255]
$ make_changes
$ hg push ../a -q
$ hg bookmarks
\* X 1:* (glob)
change a
$ cd ../a
$ hg up
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ echo 'test' >> test; hg commit -Am'test'
pull in b
$ cd ../b
$ hg pull -u
pulling from $TESTTMP/a
searching for changes
adding changesets
adding manifests
adding file changes
added 1 changesets with 1 changes to 1 files
new changesets * (glob)
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(leaving bookmark X)
$ hg status
$ hg bookmarks
X 1:* (glob)
check protection of @ bookmark
$ hg bookmark @
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit, bookmark @ is protected
[255]
$ hg status
M test
$ hg bookmarks
\* @ 2:* (glob)
X 1:* (glob)
$ hg --config bookflow.protect= commit -Am"Updated test"
$ hg bookmarks
\* @ 3:* (glob)
X 1:* (glob)
check requirement for an active bookmark
$ hg bookmark -i
$ hg bookmarks
@ 3:* (glob)
X 1:* (glob)
$ make_changes
abort: cannot commit without an active bookmark
[255]
$ hg revert test
$ rm test.orig
$ hg status
make the bookmark move by updating it on a, and then pulling
# add a commit to a
$ cd ../a
$ hg bookmark X
$ hg bookmarks
\* X 2:* (glob)
$ make_changes
$ hg bookmarks
* X 3:81af7977fdb9
# go back to b, and check out X
$ cd ../b
$ hg up X
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(activating bookmark X)
$ hg bookmarks
@ 3:* (glob)
\* X 1:* (glob)
# pull, this should move the bookmark forward, because it was changed remotely
$ hg pull -u | grep "updating to active bookmark X"
updating to active bookmark X
$ hg bookmarks
@ 3:* (glob)
* X 4:81af7977fdb9
the bookmark should not move if it diverged from remote
$ hg -R ../a status
$ hg -R ../b status
$ make_changes ../a
$ make_changes ../b
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a bookmarks
* X 4:238292f60a57
$ hg -R ../b bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
$ cd ../b
$ # make sure we cannot push after bookmarks diverged
$ hg push -B X | grep abort
abort: push creates new remote head * with bookmark 'X'! (glob)
(pull and merge or see 'hg help push' for details about pushing new heads)
[1]
$ hg pull -u | grep divergent
divergent bookmark X stored as X@default
1 other divergent bookmarks for "X"
$ hg bookmarks
@ 3:* (glob)
* X 5:096f7e86892d
X@default 6:238292f60a57
$ hg id -in
096f7e86892d 5
$ make_changes
$ hg status
$ hg bookmarks
@ 3:* (glob)
* X 7:227f941aeb07
X@default 6:238292f60a57
now merge with the remote bookmark
$ hg merge X@default --tool :local -q
$ hg status
M test
$ hg commit -m"Merged with X@default"
$ hg bookmarks
@ 3:* (glob)
* X 8:26fed9bb3219
$ hg push -B X | grep bookmark
pushing to $TESTTMP/a (?)
updating bookmark X
$ cd ../a
$ hg up -q
$ hg bookmarks
* X 7:26fed9bb3219
test hg pull when there is more than one descendant
$ cd ../a
$ hg bookmark Z
$ hg bookmark Y
$ make_changes . YY
$ hg up Z -q
$ make_changes . ZZ
created new head
$ hg bookmarks
X 7:26fed9bb3219
Y 8:131e663dbd2a
* Z 9:b74a4149df25
$ hg log -r 'p1(Y)' -r 'p1(Z)' -T '{rev}\n' # prove that Y and Z share the same parent
7
$ hg log -r 'Y%Z' -T '{rev}\n' # revs in Y but not in Z
8
$ hg log -r 'Z%Y' -T '{rev}\n' # revs in Z but not in Y
9
$ cd ../b
$ hg pull -uq
$ hg id
b74a4149df25 tip Z
$ hg bookmarks | grep \* # no active bookmark
[1]
test shelving
$ cd ../a
$ echo anotherfile > anotherfile # this change should not conflict
$ hg add anotherfile
$ hg commit -m"Change in a"
$ cd ../b
$ hg up Z | grep Z
(activating bookmark Z)
$ hg book | grep \* # make sure active bookmark
\* Z 10:* (glob)
$ echo "test b" >> test
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
$ hg shelve
shelved as Z
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
$ hg pull -uq
$ hg unshelve
unshelving change 'Z'
rebasing shelved changes
$ hg diff --stat
test | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
make the bookmark move by updating it on a, and then pulling with a local change
# add a commit to a
$ cd ../a
$ hg up -C X |fgrep "activating bookmark X"
(activating bookmark X)
# go back to b, and check out X
$ cd ../b
$ hg up -C X |fgrep "activating bookmark X"
(activating bookmark X)
# update and push from a
$ make_changes ../a
created new head
$ echo "more" >> test
$ hg pull -u 2>&1 | fgrep -v TESTTMP| fgrep -v "searching for changes" | fgrep -v adding
pulling from $TESTTMP/a
updating bookmark X
added 1 changesets with 0 changes to 0 files (+1 heads)
new changesets * (glob)
updating to active bookmark X
merging test
warning: conflicts while merging test! (edit, then use 'hg resolve --mark')
0 files updated, 0 files merged, 0 files removed, 1 files unresolved
use 'hg resolve' to retry unresolved file merges
$ hg update -Cq
$ rm test.orig
make sure that commits aren't possible if working directory is not pointing to active bookmark
$ hg -R ../a status
$ hg -R ../b status
$ hg -R ../a id -i
36a6e592ec06
$ hg -R ../a book | grep X
\* X \d+:36a6e592ec06 (re)
$ hg -R ../b id -i
36a6e592ec06
$ hg -R ../b book | grep X
\* X \d+:36a6e592ec06 (re)
$ make_changes ../a
$ hg -R ../a book | grep X
\* X \d+:f73a71c992b8 (re)
$ cd ../b
$ hg pull 2>&1 | grep -v add | grep -v pulling | grep -v searching | grep -v changeset
updating bookmark X
(run 'hg update' to get a working copy)
working directory out of sync with active bookmark, run 'hg up X'
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg book | grep X # while the bookmark moved
\* X \d+:f73a71c992b8 (re)
$ make_changes
abort: cannot commit, working directory out of sync with active bookmark
(run 'hg up X')
[255]
$ hg up -Cq -r . # cleanup local changes
$ hg status
$ hg id -i # we're still on the old commit
36a6e592ec06
$ hg up X -q
$ hg id -i # now we're on X
f73a71c992b8
$ hg book | grep X
\* X \d+:f73a71c992b8 (re)