rcutil: don't check if defaultrc/ is a directory -- we know it is
`mercurial/defaultrc/` is a directory both in the Mercurial repo and
once installed on a target platform. The directory was created in
c4ce077588d0 (config: introduce "built-in" default configuration
settings in default.d, 2014-09-04). That commit has some more
information, but it still doesn't seem to say that `defaultrc/` (then
called `default.d/`) could be a file. Perhaps the check was there to
allow you to run the same code on an older install/repo?
Differential Revision: https://phab.mercurial-scm.org/D7624
============================================
Testing obsolescence markers push: Cases B.5
============================================
Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).
This test belongs to a series of tests checking such set is properly computed
and applied. This does not tests "obsmarkers" discovery capabilities.
Category B: pruning case
TestCase 5: Push of a children of changeset which successors is pruned
B.5 Push of a children of changeset which successors is pruned
==============================================================
.. This case Mirror A.4, with pruned changeset successors.
..
.. {{{
.. C ◔
.. |
.. B⇠ø⇠⊗ B'
.. | |
.. A ø⇠○ A'
.. |/
.. ●
.. }}}
..
.. Marker exist from:
..
.. * `A ø⇠○ A'`
.. * `B ø⇠○ B'`
.. * chain from B
.. * `B' is pruned`
..
.. Command run:
..
.. * hg push -r C
..
.. Expected exchange:
..
.. * chain from B
..
.. Expected exclude:
..
.. * `A ø⇠○ A'`
.. * `B ø⇠○ B'`
.. * `B' prune`
Setup
-----
$ . $TESTDIR/testlib/exchange-obsmarker-util.sh
initial
$ setuprepos B.5
creating test repo for test case B.5
- pulldest
- main
- pushdest
cd into `main` and proceed with env setup
$ cd main
$ mkcommit A0
$ mkcommit B0
$ mkcommit C
$ hg up --quiet 0
$ mkcommit A1
created new head
$ mkcommit B1
$ hg debugobsolete --hidden `getid 'desc(A0)'` `getid 'desc(A1)'`
1 new obsolescence markers
obsoleted 1 changesets
2 new orphan changesets
$ hg debugobsolete --hidden aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(B0)'`
1 new obsolescence markers
$ hg debugobsolete --hidden `getid 'desc(B0)'` `getid 'desc(B1)'`
1 new obsolescence markers
obsoleted 1 changesets
$ hg prune -qd '0 0' 'desc(B1)'
$ hg log -G --hidden
x 069b05c3876d (draft): B1
|
@ e5ea8f9c7314 (draft): A1
|
| * 1d0f3cd25300 (draft): C
| |
| x 6e72f0a95b5e (draft): B0
| |
| x 28b51eb45704 (draft): A0
|/
o a9bdc8b26820 (public): O
$ inspect_obsmarkers
obsstore content
================
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
069b05c3876d56f62895e853a501ea58ea85f68d 0 {e5ea8f9c73143125d36658e90ef70c6d2027a5b7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
$ cd ..
$ cd ..
Actual Test (explicit push version)
-----------------------------------
$ dotest B.5 C -f
## Running testcase B.5
# testing echange of "C" (1d0f3cd25300)
## initial state
# obstore: main
069b05c3876d56f62895e853a501ea58ea85f68d 0 {e5ea8f9c73143125d36658e90ef70c6d2027a5b7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
# obstore: pulldest
## pushing "C" from main to pushdest
pushing to pushdest
searching for changes
remote: adding changesets
remote: adding manifests
remote: adding file changes
remote: added 3 changesets with 3 changes to 3 files
remote: 1 new obsolescence markers
## post push state
# obstore: main
069b05c3876d56f62895e853a501ea58ea85f68d 0 {e5ea8f9c73143125d36658e90ef70c6d2027a5b7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
## pulling "1d0f3cd25300" from main into pulldest
pulling from main
searching for changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 3 files
1 new obsolescence markers
new changesets 28b51eb45704:1d0f3cd25300 (3 drafts)
(run 'hg update' to get a working copy)
## post pull state
# obstore: main
069b05c3876d56f62895e853a501ea58ea85f68d 0 {e5ea8f9c73143125d36658e90ef70c6d2027a5b7} (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 069b05c3876d56f62895e853a501ea58ea85f68d 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pushdest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
# obstore: pulldest
aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 6e72f0a95b5e01a7504743aa941f69cb1fbef8b0 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}