match: convert O(n) to O(log n) in exactmatcher.visitchildrenset
When using narrow, during rebase this is called (at least) once per directory in
the set of files in the commit being rebased. Every time it's called, we did the
set arithmetic (now extracted and cached), which was probably pretty cheap but
not necessary to repeat each time, looped over every item in the matcher and
kept things that started with the directory we were querying.
With very large narrowspecs, and a commit that touched a file in a large number
of directories, this was slow. In a pathological repo, the rebase of a single
commit (that touched over 17k files, I believe in approximately as many
directories) with a narrowspec that had >32k entries took 8,246s of profiled
time, with 5,007s of that spent in visitchildrenset (transitively). With this
change, the time spent in visitchildrenset is less than 34s (which is where my
profile cut off). Most of the remaining time was network access due to our
custom remotefilelog-based setup not properly prefetching.
Differential Revision: https://phab.mercurial-scm.org/D10294
#testcases filelog compatibility changeset sidedata
$ cat >> $HGRCPATH << EOF
> [extensions]
> rebase=
> [alias]
> l = log -G -T '{rev} {desc}\n{files}\n'
> EOF
#if compatibility
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = compatibility
> EOF
#endif
#if changeset
$ cat >> $HGRCPATH << EOF
> [experimental]
> copies.read-from = changeset-only
> copies.write-to = changeset-only
> EOF
#endif
#if sidedata
$ cat >> $HGRCPATH << EOF
> [format]
> exp-use-copies-side-data-changeset = yes
> EOF
#endif
$ REPONUM=0
$ newrepo() {
> cd $TESTTMP
> REPONUM=`expr $REPONUM + 1`
> hg init repo-$REPONUM
> cd repo-$REPONUM
> }
Copy a file, then delete destination, then copy again. This does not create a new filelog entry.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg cp x y
$ hg ci -qm 'copy x to y'
$ hg rm y
$ hg ci -m 'remove y'
$ hg cp -f x y
$ hg ci -m 'copy x onto y (again)'
$ hg l
@ 4 copy x onto y (again)
| y
o 3 remove y
| y
o 2 copy x to y
| y
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugp1copies -r 4
x -> y
$ hg debugpathcopies 0 4
x -> y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
merging y and x to y
$ hg co -qC 1
$ hg graft -r 4
grafting 4:* "copy x onto y (again)" (glob)
merging x and y to y
Copy x to y, then remove y, then add back y. With copy metadata in the
changeset, this could easily end up reporting y as copied from x (if we don't
unmark it as a copy when it's removed). Despite x and y not being related, we
want grafts to propagate across the rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg rm y
$ hg ci -qm 'remove y'
$ echo x > y
$ hg ci -Aqm 'add back y'
$ hg l
@ 4 add back y
| y
o 3 remove y
| y
o 2 rename x to y
| x y
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugpathcopies 0 4
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x, remove it, then add it back, then rename x to y. Similar to the case
above, but here the break in history is before the rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x > x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
o 3 add x again
| x
o 2 remove x
| x
| o 1 modify x
|/ x
o 0 add x
x
$ hg debugpathcopies 0 4
x -> y
$ hg graft -r 1
grafting 1:* "modify x" (glob)
merging y and x to y
$ hg co -qC 1
$ hg graft -r 4
grafting 4:* "rename x to y" (glob)
merging x and y to y
Add x, modify it, remove it, then add it back, then rename x to y. Similar to
the case above, but here the re-added file's nodeid is different from before
the break.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ echo x3 > x
$ hg ci -qm 'modify x again'
$ hg co -q 1
$ hg rm x
$ hg ci -qm 'remove x'
# Same content to avoid conflicts
$ hg revert -r 1 x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -m 'rename x to y'
$ hg l
@ 5 rename x to y
| x y
o 4 add x again
| x
o 3 remove x
| x
| o 2 modify x again
|/ x
o 1 modify x
| x
o 0 add x
x
$ hg debugpathcopies 0 5
x -> y (no-filelog !)
#if no-filelog
$ hg graft -r 2
grafting 2:* "modify x again" (glob)
merging y and x to y
#else
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 2
grafting 2:* "modify x again" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
#endif
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 5
grafting 5:* "rename x to y"* (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x, remove it, then add it back, rename x to y from the first commit.
Similar to the case above, but here the break in history is parallel to the
rename.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x > x
$ hg ci -Aqm 'add x again'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
| o 3 modify x
| | x
| o 2 add x again
| | x
| o 1 remove x
|/ x
o 0 add x
x
$ hg debugpathcopies 2 4
x -> y
$ hg graft -r 3
grafting 3:* "modify x" (glob)
merging y and x to y
$ hg co -qC 3
$ hg graft -r 4
grafting 4:* "rename x to y" (glob)
merging x and y to y
Add x, remove it, then add it back, rename x to y from the first commit.
Similar to the case above, but here the re-added file's nodeid is different
from the base.
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg rm x
$ hg ci -qm 'remove x'
$ echo x2 > x
$ hg ci -Aqm 'add x again with different content'
$ hg co -q 0
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 3 rename x to y
| x y
| o 2 add x again with different content
| | x
| o 1 remove x
|/ x
o 0 add x
x
$ hg debugpathcopies 2 3
x -> y
BROKEN: This should merge the changes from x into y
$ hg graft -r 2
grafting 2:* "add x again with different content" (glob)
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 3
grafting 3:* "rename x to y" (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Add x on two branches, then rename x to y on one side. Similar to the case
above, but here the break in history is via the base commit.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'base'
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ echo x > x
$ hg ci -Aqm 'add x again'
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 4 rename x to y
| x y
o 3 add x again
| x
| o 2 modify x
| | x
| o 1 add x
|/ x
o 0 base
a
$ hg debugpathcopies 1 4
x -> y
$ hg graft -r 2
grafting 2:* "modify x" (glob)
merging y and x to y
$ hg co -qC 2
$ hg graft -r 4
grafting 4:* "rename x to y"* (glob)
merging x and y to y
Add x on two branches, with same content but different history, then rename x
to y on one side. Similar to the case above, here the file's nodeid is
different between the branches.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'base'
$ echo x > x
$ hg ci -Aqm 'add x'
$ echo x2 > x
$ hg ci -m 'modify x'
$ hg co -q 0
$ touch x
$ hg ci -Aqm 'add empty x'
# Same content to avoid conflicts
$ hg revert -r 1 x
$ hg ci -m 'modify x to match commit 1'
$ hg mv x y
$ hg ci -qm 'rename x to y'
$ hg l
@ 5 rename x to y
| x y
o 4 modify x to match commit 1
| x
o 3 add empty x
| x
| o 2 modify x
| | x
| o 1 add x
|/ x
o 0 base
a
$ hg debugpathcopies 1 5
x -> y (no-filelog !)
#if no-filelog
$ hg graft -r 2
grafting 2:* "modify x" (glob)
merging y and x to y
#else
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 2
grafting 2:* "modify x" (glob)
file 'x' was deleted in local [local] but was modified in other [graft].
You can use (c)hanged version, leave (d)eleted, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
#endif
$ hg co -qC 2
BROKEN: This should succeed and merge the changes from x into y
$ hg graft -r 5
grafting 5:* "rename x to y"* (glob)
file 'x' was deleted in other [graft] but was modified in local [local].
You can use (c)hanged version, (d)elete, or leave (u)nresolved.
What do you want to do? u
abort: unresolved conflicts, can't continue
(use 'hg resolve' and 'hg graft --continue')
[1]
Copies via null revision (there shouldn't be any)
$ newrepo
$ echo x > x
$ hg ci -Aqm 'add x'
$ hg cp x y
$ hg ci -m 'copy x to y'
$ hg co -q null
$ echo x > x
$ hg ci -Aqm 'add x (again)'
$ hg l
@ 2 add x (again)
x
o 1 copy x to y
| y
o 0 add x
x
$ hg debugpathcopies 1 2
$ hg debugpathcopies 2 1
$ hg graft -r 1
grafting 1:* "copy x to y" (glob)
Copies involving a merge of multiple roots.
$ newrepo
$ echo a > a
$ hg ci -Aqm 'add a'
$ echo a >> a
$ hg ci -Aqm 'update a'
$ echo a >> a
$ hg ci -Aqm 'update a'
$ hg up null
0 files updated, 0 files merged, 1 files removed, 0 files unresolved
$ echo b > a
$ hg ci -Aqm 'add a'
$ hg mv a b
$ hg ci -Aqm 'move a to b'
$ echo b >> b
$ hg ci -Aqm 'update b'
$ hg merge 0
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)
$ hg ci -m "merge with other branch"
$ echo a >> a
$ echo a >> a
$ echo b >> b
$ hg ci -Aqm 'update a and b'
$ hg l
@ 7 update a and b
| a b
o 6 merge with other branch
|\
| o 5 update b
| | b
| o 4 move a to b
| | a b
| o 3 add a
| a
| o 2 update a
| | a
| o 1 update a
|/ a
o 0 add a
a
$ hg cat a -r 7
a
a
a
$ hg cat a -r 2
a
a
a
$ hg cat a -r 0
a
$ hg debugpathcopies 7 2
$ hg debugpathcopies 2 7
$ hg merge 2
1 files updated, 0 files merged, 0 files removed, 0 files unresolved
(branch merge, don't forget to commit)