hgext/fetch.py

tests: escape bytes setting MSB in input of grep for portability

GNU grep (2.21-2 or later) assumes that input is encoded in LC_CTYPE,
and input is binary if it contains byte sequence not valid for that
encoding.

For example, if locale is configured as C, a byte setting most
significant bit (MSB) makes such GNU grep show "Binary file <FILENAME>
matches" message instead of matched lines unintentionally.

This behavior is recognized as a bug, and fixed in GNU grep 2.25-1 or
later. But some distributions are shipped with such buggy version
(e.g. Ubuntu xenial, which is used by launchpad buildbot).

    http://debbugs.gnu.org/cgi/bugreport.cgi?bug=19230
    https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=800670
    http://packages.ubuntu.com/xenial/grep

This causes failure of test-commit-interactive.t, which applies grep
on CP932 byte sequence since 1111e84de635.

But, explicit setting LC_CTYPE for CP932 might cause another problem,
because it can't be assumed that all environment running Mercurial
tests allows arbitrary locale setting.

To resolve this issue, this patch escapes bytes setting MSB in input
of grep.

For this purpose:

  - str.encode('string-escape') isn't useful, because it escapes also
    control code (less than 0x20), and makes EOL handling complicated

  - "f --hexdump" isn't useful, because it isn't line-oriented

  - "sed -n" seems reasonable, but "sed" itself sometimes causes
    portability issue, too (e.g. 900767dfa80d or afb86ee925bf)

This patch is posted with "stable" flag, because 1111e84de635 is on
stable branch.

# fetch.py - pull and merge remote changes
#
# Copyright 2006 Vadim Gelfer <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

'''pull, update and merge in one command (DEPRECATED)'''

from mercurial.i18n import _
from mercurial.node import short
from mercurial import commands, cmdutil, hg, util, error
from mercurial.lock import release
from mercurial import exchange

cmdtable = {}
command = cmdutil.command(cmdtable)
# Note for extension authors: ONLY specify testedwith = 'internal' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'internal'

@command('fetch',
    [('r', 'rev', [],
     _('a specific revision you would like to pull'), _('REV')),
    ('e', 'edit', None, _('invoke editor on commit messages')),
    ('', 'force-editor', None, _('edit commit message (DEPRECATED)')),
    ('', 'switch-parent', None, _('switch parents when merging')),
    ] + commands.commitopts + commands.commitopts2 + commands.remoteopts,
    _('hg fetch [SOURCE]'))
def fetch(ui, repo, source='default', **opts):
    '''pull changes from a remote repository, merge new changes if needed.

    This finds all changes from the repository at the specified path
    or URL and adds them to the local repository.

    If the pulled changes add a new branch head, the head is
    automatically merged, and the result of the merge is committed.
    Otherwise, the working directory is updated to include the new
    changes.

    When a merge is needed, the working directory is first updated to
    the newly pulled changes. Local changes are then merged into the
    pulled changes. To switch the merge order, use --switch-parent.

    See :hg:`help dates` for a list of formats valid for -d/--date.

    Returns 0 on success.
    '''

    date = opts.get('date')
    if date:
        opts['date'] = util.parsedate(date)

    parent, _p2 = repo.dirstate.parents()
    branch = repo.dirstate.branch()
    try:
        branchnode = repo.branchtip(branch)
    except error.RepoLookupError:
        branchnode = None
    if parent != branchnode:
        raise error.Abort(_('working directory not at branch tip'),
                         hint=_("use 'hg update' to check out branch tip"))

    wlock = lock = None
    try:
        wlock = repo.wlock()
        lock = repo.lock()

        cmdutil.bailifchanged(repo)

        bheads = repo.branchheads(branch)
        bheads = [head for head in bheads if len(repo[head].children()) == 0]
        if len(bheads) > 1:
            raise error.Abort(_('multiple heads in this branch '
                               '(use "hg heads ." and "hg merge" to merge)'))

        other = hg.peer(repo, opts, ui.expandpath(source))
        ui.status(_('pulling from %s\n') %
                  util.hidepassword(ui.expandpath(source)))
        revs = None
        if opts['rev']:
            try:
                revs = [other.lookup(rev) for rev in opts['rev']]
            except error.CapabilityError:
                err = _("other repository doesn't support revision lookup, "
                        "so a rev cannot be specified.")
                raise error.Abort(err)

        # Are there any changes at all?
        modheads = exchange.pull(repo, other, heads=revs).cgresult
        if modheads == 0:
            return 0

        # Is this a simple fast-forward along the current branch?
        newheads = repo.branchheads(branch)
        newchildren = repo.changelog.nodesbetween([parent], newheads)[2]
        if len(newheads) == 1 and len(newchildren):
            if newchildren[0] != parent:
                return hg.update(repo, newchildren[0])
            else:
                return 0

        # Are there more than one additional branch heads?
        newchildren = [n for n in newchildren if n != parent]
        newparent = parent
        if newchildren:
            newparent = newchildren[0]
            hg.clean(repo, newparent)
        newheads = [n for n in newheads if n != newparent]
        if len(newheads) > 1:
            ui.status(_('not merging with %d other new branch heads '
                        '(use "hg heads ." and "hg merge" to merge them)\n') %
                      (len(newheads) - 1))
            return 1

        if not newheads:
            return 0

        # Otherwise, let's merge.
        err = False
        if newheads:
            # By default, we consider the repository we're pulling
            # *from* as authoritative, so we merge our changes into
            # theirs.
            if opts['switch_parent']:
                firstparent, secondparent = newparent, newheads[0]
            else:
                firstparent, secondparent = newheads[0], newparent
                ui.status(_('updating to %d:%s\n') %
                          (repo.changelog.rev(firstparent),
                           short(firstparent)))
            hg.clean(repo, firstparent)
            ui.status(_('merging with %d:%s\n') %
                      (repo.changelog.rev(secondparent), short(secondparent)))
            err = hg.merge(repo, secondparent, remind=False)

        if not err:
            # we don't translate commit messages
            message = (cmdutil.logmessage(ui, opts) or
                       ('Automated merge with %s' %
                        util.removeauth(other.url())))
            editopt = opts.get('edit') or opts.get('force_editor')
            editor = cmdutil.getcommiteditor(edit=editopt, editform='fetch')
            n = repo.commit(message, opts['user'], opts['date'], editor=editor)
            ui.status(_('new changeset %d:%s merges remote changes '
                        'with local\n') % (repo.changelog.rev(n),
                                           short(n)))

        return err

    finally:
        release(lock, wlock)