view hgext/show.py @ 42743:8c9a6adec67a

rust-discovery: using the children cache in add_missing

The DAG range computation often needs to get back to very old
revisions, and turns out to be disproportionately long, given
that the end goal is to remove the descendents of the given
missing revisons from the undecided set.

The fast iteration capabilities available in the Rust case make
it possible to avoid the DAG range entirely, at the cost of
precomputing the children cache, and to simply iterate on
children of the given missing revisions.

This is a case where staying on the same side of the interface
between the two languages has clear benefits.

On discoveries with initial undecided sets
small enough to bypass sampling entirely, the total cost of
computing the children cache and the subsequent iteration
becomes better than the Python + C counterpart, which relies on
reachableroots2.

For example, on a repo with more than one million revisions with
an initial undecided set of 11 elements, we get these figures:

Rust version with simple iteration
  addcommons: 57.287us
  first undecided computation: 184.278334ms
  first children cache computation: 131.056us
  addmissings iteration: 42.766us
  first addinfo total: 185.24 ms

Python + C version
  first addcommons: 0.29 ms
  addcommons 0.21 ms
  first undecided computation 191.35 ms
  addmissings 45.75 ms
  first addinfo total: 237.77 ms

On discoveries with large undecided sets, the initial price paid
makes the first addinfo slower than the Python + C version,
but that's more than compensated by the gain in sampling and
subsequent iterations.
Here's an extreme example with an undecided set of a million revisions:

Rust version:
  first undecided computation: 293.842629ms
  first children cache computation: 407.911297ms
  addmissings iteration: 34.312869ms
  first addinfo total: 776.02 ms
  taking initial sample
  query 2: sampling time: 1318.38 ms
  query 2; still undecided: 1005013, sample size is: 200
  addmissings: 143.062us

Python + C version:
  first undecided computation 298.13 ms
  addmissings 80.13 ms
  first addinfo total: 399.62 ms
  taking initial sample
  query 2: sampling time: 3957.23 ms
  query 2; still undecided: 1005013, sample size is: 200
  addmissings 52.88 ms

Differential Revision: https://phab.mercurial-scm.org/D6428

# show.py - Extension implementing `hg show`
#
# Copyright 2017 Gregory Szorc <[e-mail]>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.

"""unified command to show various repository information (EXPERIMENTAL)

This extension provides the :hg:`show` command, which provides a central
command for displaying commonly-accessed repository data and views of that
data.

The following config options can influence operation.

``commands``
------------

``show.aliasprefix``
   List of strings that will register aliases for views. e.g. ``s`` will
   effectively set config options ``alias.s<view> = show <view>`` for all
   views. i.e. `hg swork` would execute `hg show work`.

   Aliases that would conflict with existing registrations will not be
   performed.
"""

from __future__ import absolute_import

from mercurial.i18n import _
from mercurial.node import (
    nullrev,
)
from mercurial import (
    cmdutil,
    commands,
    destutil,
    error,
    formatter,
    graphmod,
    logcmdutil,
    phases,
    pycompat,
    registrar,
    revset,
    revsetlang,
    scmutil,
)

# Note for extension authors: ONLY specify testedwith = 'ships-with-hg-core' for
# extensions which SHIP WITH MERCURIAL. Non-mainline extensions should
# be specifying the version(s) of Mercurial they are tested with, or
# leave the attribute unspecified.
testedwith = 'ships-with-hg-core'

cmdtable = {}
command = registrar.command(cmdtable)

revsetpredicate = registrar.revsetpredicate()

class showcmdfunc(registrar._funcregistrarbase):
    """Register a function to be invoked for an `hg show <thing>`."""

    # Used by _formatdoc().
    _docformat = '%s -- %s'

    def _extrasetup(self, name, func, fmtopic=None, csettopic=None):
        """Called with decorator arguments to register a show view.

        ``name`` is the sub-command name.

        ``func`` is the function being decorated.

        ``fmtopic`` is the topic in the style that will be rendered for
        this view.

        ``csettopic`` is the topic in the style to be used for a changeset
        printer.

        If ``fmtopic`` is specified, the view function will receive a
        formatter instance. If ``csettopic`` is specified, the view
        function will receive a changeset printer.
        """
        func._fmtopic = fmtopic
        func._csettopic = csettopic

showview = showcmdfunc()

@command('show', [
    # TODO: Switch this template flag to use cmdutil.formatteropts if
    # 'hg show' becomes stable before --template/-T is stable. For now,
    # we are putting it here without the '(EXPERIMENTAL)' flag because it
    # is an important part of the 'hg show' user experience and the entire
    # 'hg show' experience is experimental.
    ('T', 'template', '', ('display with template'), _('TEMPLATE')),
    ], _('VIEW'),
    helpcategory=command.CATEGORY_CHANGE_NAVIGATION)
def show(ui, repo, view=None, template=None):
    """show various repository information

    A requested view of repository data is displayed.

    If no view is requested, the list of available views is shown and the
    command aborts.

    .. note::

       There are no backwards compatibility guarantees for the output of this
       command. Output may change in any future Mercurial release.

       Consumers wanting stable command output should specify a template via
       ``-T/--template``.

    List of available views:
    """
    if ui.plain() and not template:
        hint = _('invoke with -T/--template to control output format')
        raise error.Abort(_('must specify a template in plain mode'), hint=hint)

    views = showview._table

    if not view:
        ui.pager('show')
        # TODO consider using formatter here so available views can be
        # rendered to custom format.
        ui.write(_('available views:\n'))
        ui.write('\n')

        for name, func in sorted(views.items()):
            ui.write(('%s\n') % pycompat.sysbytes(func.__doc__))

        ui.write('\n')
        raise error.Abort(_('no view requested'),
                          hint=_('use "hg show VIEW" to choose a view'))

    # TODO use same logic as dispatch to perform prefix matching.
    if view not in views:
        raise error.Abort(_('unknown view: %s') % view,
                          hint=_('run "hg show" to see available views'))

    template = template or 'show'

    fn = views[view]
    ui.pager('show')

    if fn._fmtopic:
        fmtopic = 'show%s' % fn._fmtopic
        with ui.formatter(fmtopic, {'template': template}) as fm:
            return fn(ui, repo, fm)
    elif fn._csettopic:
        ref = 'show%s' % fn._csettopic
        spec = formatter.lookuptemplate(ui, ref, template)
        displayer = logcmdutil.changesettemplater(ui, repo, spec, buffered=True)
        return fn(ui, repo, displayer)
    else:
        return fn(ui, repo)

@showview('bookmarks', fmtopic='bookmarks')
def showbookmarks(ui, repo, fm):
    """bookmarks and their associated changeset"""
    marks = repo._bookmarks
    if not len(marks):
        # This is a bit hacky. Ideally, templates would have a way to
        # specify an empty output, but we shouldn't corrupt JSON while
        # waiting for this functionality.
        if not isinstance(fm, formatter.jsonformatter):
            ui.write(_('(no bookmarks set)\n'))
        return

    revs = [repo[node].rev() for node in marks.values()]
    active = repo._activebookmark
    longestname = max(len(b) for b in marks)
    nodelen = longestshortest(repo, revs)

    for bm, node in sorted(marks.items()):
        fm.startitem()
        fm.context(ctx=repo[node])
        fm.write('bookmark', '%s', bm)
        fm.write('node', fm.hexfunc(node), fm.hexfunc(node))
        fm.data(active=bm == active,
                longestbookmarklen=longestname,
                nodelen=nodelen)

@showview('stack', csettopic='stack')
def showstack(ui, repo, displayer):
    """current line of work"""
    wdirctx = repo['.']
    if wdirctx.rev() == nullrev:
        raise error.Abort(_('stack view only available when there is a '
                            'working directory'))

    if wdirctx.phase() == phases.public:
        ui.write(_('(empty stack; working directory parent is a published '
                   'changeset)\n'))
        return

    # TODO extract "find stack" into a function to facilitate
    # customization and reuse.

    baserev = destutil.stackbase(ui, repo)
    basectx = None

    if baserev is None:
        baserev = wdirctx.rev()
        stackrevs = {wdirctx.rev()}
    else:
        stackrevs = set(repo.revs('%d::.', baserev))

    ctx = repo[baserev]
    if ctx.p1().rev() != nullrev:
        basectx = ctx.p1()

    # And relevant descendants.
    branchpointattip = False
    cl = repo.changelog

    for rev in cl.descendants([wdirctx.rev()]):
        ctx = repo[rev]

        # Will only happen if . is public.
        if ctx.phase() == phases.public:
            break

        stackrevs.add(ctx.rev())

        # ctx.children() within a function iterating on descandants
        # potentially has severe performance concerns because revlog.children()
        # iterates over all revisions after ctx's node. However, the number of
        # draft changesets should be a reasonably small number. So even if
        # this is quadratic, the perf impact should be minimal.
        if len(ctx.children()) > 1:
            branchpointattip = True
            break

    stackrevs = list(sorted(stackrevs, reverse=True))

    # Find likely target heads for the current stack. These are likely
    # merge or rebase targets.
    if basectx:
        # TODO make this customizable?
        newheads = set(repo.revs('heads(%d::) - %ld - not public()',
                                 basectx.rev(), stackrevs))
    else:
        newheads = set()

    allrevs = set(stackrevs) | newheads | {baserev}
    nodelen = longestshortest(repo, allrevs)

    try:
        cmdutil.findcmd('rebase', commands.table)
        haverebase = True
    except (error.AmbiguousCommand, error.UnknownCommand):
        haverebase = False

    # TODO use templating.
    # TODO consider using graphmod. But it may not be necessary given
    # our simplicity and the customizations required.
    # TODO use proper graph symbols from graphmod

    tres = formatter.templateresources(ui, repo)
    shortesttmpl = formatter.maketemplater(ui, '{shortest(node, %d)}' % nodelen,
                                           resources=tres)
    def shortest(ctx):
        return shortesttmpl.renderdefault({'ctx': ctx, 'node': ctx.hex()})

    # We write out new heads to aid in DAG awareness and to help with decision
    # making on how the stack should be reconciled with commits made since the
    # branch point.
    if newheads:
        # Calculate distance from base so we can render the count and so we can
        # sort display order by commit distance.
        revdistance = {}
        for head in newheads:
            # There is some redundancy in DAG traversal here and therefore
            # room to optimize.
            ancestors = cl.ancestors([head], stoprev=basectx.rev())
            revdistance[head] = len(list(ancestors))

        sourcectx = repo[stackrevs[-1]]

        sortedheads = sorted(newheads, key=lambda x: revdistance[x],
                             reverse=True)

        for i, rev in enumerate(sortedheads):
            ctx = repo[rev]

            if i:
                ui.write(': ')
            else:
                ui.write('  ')

            ui.write(('o  '))
            displayer.show(ctx, nodelen=nodelen)
            displayer.flush(ctx)
            ui.write('\n')

            if i:
                ui.write(':/')
            else:
                ui.write(' /')

            ui.write('    (')
            ui.write(_('%d commits ahead') % revdistance[rev],
                     label='stack.commitdistance')

            if haverebase:
                # TODO may be able to omit --source in some scenarios
                ui.write('; ')
                ui.write(('hg rebase --source %s --dest %s' % (
                         shortest(sourcectx), shortest(ctx))),
                         label='stack.rebasehint')

            ui.write(')\n')

        ui.write(':\n:    ')
        ui.write(_('(stack head)\n'), label='stack.label')

    if branchpointattip:
        ui.write(' \\ /  ')
        ui.write(_('(multiple children)\n'), label='stack.label')
        ui.write('  |\n')

    for rev in stackrevs:
        ctx = repo[rev]
        symbol = '@' if rev == wdirctx.rev() else 'o'

        if newheads:
            ui.write(': ')
        else:
            ui.write('  ')

        ui.write(symbol, '  ')
        displayer.show(ctx, nodelen=nodelen)
        displayer.flush(ctx)
        ui.write('\n')

    # TODO display histedit hint?

    if basectx:
        # Vertically and horizontally separate stack base from parent
        # to reinforce stack boundary.
        if newheads:
            ui.write(':/   ')
        else:
            ui.write(' /   ')

        ui.write(_('(stack base)'), '\n', label='stack.label')
        ui.write(('o  '))

        displayer.show(basectx, nodelen=nodelen)
        displayer.flush(basectx)
        ui.write('\n')

@revsetpredicate('_underway([commitage[, headage]])')
def underwayrevset(repo, subset, x):
    args = revset.getargsdict(x, 'underway', 'commitage headage')
    if 'commitage' not in args:
        args['commitage'] = None
    if 'headage' not in args:
        args['headage'] = None

    # We assume callers of this revset add a topographical sort on the
    # result. This means there is no benefit to making the revset lazy
    # since the topographical sort needs to consume all revs.
    #
    # With this in mind, we build up the set manually instead of constructing
    # a complex revset. This enables faster execution.

    # Mutable changesets (non-public) are the most important changesets
    # to return. ``not public()`` will also pull in obsolete changesets if
    # there is a non-obsolete changeset with obsolete ancestors. This is
    # why we exclude obsolete changesets from this query.
    rs = 'not public() and not obsolete()'
    rsargs = []
    if args['commitage']:
        rs += ' and date(%s)'
        rsargs.append(revsetlang.getstring(args['commitage'],
                                           _('commitage requires a string')))

    mutable = repo.revs(rs, *rsargs)
    relevant = revset.baseset(mutable)

    # Add parents of mutable changesets to provide context.
    relevant += repo.revs('parents(%ld)', mutable)

    # We also pull in (public) heads if they a) aren't closing a branch
    # b) are recent.
    rs = 'head() and not closed()'
    rsargs = []
    if args['headage']:
        rs += ' and date(%s)'
        rsargs.append(revsetlang.getstring(args['headage'],
                                           _('headage requires a string')))

    relevant += repo.revs(rs, *rsargs)

    # Add working directory parent.
    wdirrev = repo['.'].rev()
    if wdirrev != nullrev:
        relevant += revset.baseset({wdirrev})

    return subset & relevant

@showview('work', csettopic='work')
def showwork(ui, repo, displayer):
    """changesets that aren't finished"""
    # TODO support date-based limiting when calling revset.
    revs = repo.revs('sort(_underway(), topo)')
    nodelen = longestshortest(repo, revs)

    revdag = graphmod.dagwalker(repo, revs)

    ui.setconfig('experimental', 'graphshorten', True)
    logcmdutil.displaygraph(ui, repo, revdag, displayer, graphmod.asciiedges,
                            props={'nodelen': nodelen})

def extsetup(ui):
    # Alias `hg <prefix><view>` to `hg show <view>`.
    for prefix in ui.configlist('commands', 'show.aliasprefix'):
        for view in showview._table:
            name = '%s%s' % (prefix, view)

            choice, allcommands = cmdutil.findpossible(name, commands.table,
                                                       strict=True)

            # This alias is already a command name. Don't set it.
            if name in choice:
                continue

            # Same for aliases.
            if ui.config('alias', name, None):
                continue

            ui.setconfig('alias', name, 'show %s' % view, source='show')

def longestshortest(repo, revs, minlen=4):
    """Return the length of the longest shortest node to identify revisions.

    The result of this function can be used with the ``shortest()`` template
    function to ensure that a value is unique and unambiguous for a given
    set of nodes.

    The number of revisions in the repo is taken into account to prevent
    a numeric node prefix from conflicting with an integer revision number.
    If we fail to do this, a value of e.g. ``10023`` could mean either
    revision 10023 or node ``10023abc...``.
    """
    if not revs:
        return minlen
    cl = repo.changelog
    return max(len(scmutil.shortesthexnodeidprefix(repo, cl.node(r), minlen))
               for r in revs)

# Adjust the docstring of the show command so it shows all registered views.
# This is a bit hacky because it runs at the end of module load. When moved
# into core or when another extension wants to provide a view, we'll need
# to do this more robustly.
# TODO make this more robust.
def _updatedocstring():
    longest = max(map(len, showview._table.keys()))
    entries = []
    for key in sorted(showview._table.keys()):
        entries.append(r'    %s   %s' % (
            pycompat.sysstr(key.ljust(longest)), showview._table[key]._origdoc))

    cmdtable['show'][0].__doc__ = pycompat.sysstr('%s\n\n%s\n    ') % (
        cmdtable['show'][0].__doc__.rstrip(),
        pycompat.sysstr('\n\n').join(entries))

_updatedocstring()