changectx: increase perf of walk function
When running 'hg cat -r . <file>' it was doing an expensive ctx.walk(m) which
applied the regex to every file in the manifest.
This changes changectx.walk to iterate over just the files in the regex, if no
other patterns are specified. This cuts hg cat time by 50% in our repo and
probably benefits a few other commands as well.
$ "$TESTDIR/hghave" svn svn-bindings || exit 80
$ cat >> $HGRCPATH <<EOF
> [extensions]
> convert =
> [convert]
> svn.trunk = mytrunk
> EOF
$ svnadmin create svn-repo
$ SVNREPOPATH=`pwd`/svn-repo
#if windows
$ SVNREPOURL=file:///`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#else
$ SVNREPOURL=file://`python -c "import urllib, sys; sys.stdout.write(urllib.quote(sys.argv[1]))" "$SVNREPOPATH"`
#endif
$ INVALIDREVISIONID=svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1
$ VALIDREVISIONID=svn:a2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk/mytrunk@1
Now test that it works with trunk/tags layout, but no branches yet.
Initial svn import
$ mkdir projB
$ cd projB
$ mkdir mytrunk
$ mkdir tags
$ cd ..
$ svn import -m "init projB" projB "$SVNREPOURL/proj%20B" | sort
Adding projB/mytrunk (glob)
Adding projB/tags (glob)
Committed revision 1.
Update svn repository
$ svn co "$SVNREPOURL/proj%20B/mytrunk" B
Checked out revision 1.
$ cd B
$ echo hello > 'letter .txt'
$ svn add 'letter .txt'
A letter .txt
$ svn ci -m hello
Adding letter .txt
Transmitting file data .
Committed revision 2.
$ "$TESTDIR/svn-safe-append.py" world 'letter .txt'
$ svn ci -m world
Sending letter .txt
Transmitting file data .
Committed revision 3.
$ svn copy -m "tag v0.1" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.1"
Committed revision 4.
$ "$TESTDIR/svn-safe-append.py" 'nice day today!' 'letter .txt'
$ svn ci -m "nice day"
Sending letter .txt
Transmitting file data .
Committed revision 5.
$ cd ..
Convert to hg once and also test localtimezone option
NOTE: This doesn't check all time zones -- it merely determines that
the configuration option is taking effect.
An arbitrary (U.S.) time zone is used here. TZ=US/Hawaii is selected
since it does not use DST (unlike other U.S. time zones) and is always
a fixed difference from UTC.
$ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
initializing destination B-hg repository
scanning source...
sorting...
converting...
3 init projB
2 hello
1 world
0 nice day
updating tags
Update svn repository again
$ cd B
$ "$TESTDIR/svn-safe-append.py" "see second letter" 'letter .txt'
$ echo "nice to meet you" > letter2.txt
$ svn add letter2.txt
A letter2.txt
$ svn ci -m "second letter"
Sending letter .txt
Adding letter2.txt
Transmitting file data ..
Committed revision 6.
$ svn copy -m "tag v0.2" "$SVNREPOURL/proj%20B/mytrunk" "$SVNREPOURL/proj%20B/tags/v0.2"
Committed revision 7.
$ "$TESTDIR/svn-safe-append.py" "blah-blah-blah" letter2.txt
$ svn ci -m "work in progress"
Sending letter2.txt
Transmitting file data .
Committed revision 8.
$ cd ..
$ hg convert -s svn "$SVNREPOURL/proj%20B/non-existent-path" dest
initializing destination dest repository
abort: no revision found in module /proj B/non-existent-path
[255]
########################################
Test incremental conversion
$ TZ=US/Hawaii hg convert --config convert.localtimezone=True "$SVNREPOURL/proj%20B" B-hg
scanning source...
sorting...
converting...
1 second letter
0 work in progress
updating tags
$ cd B-hg
$ hg log -G --template '{rev} {desc|firstline} date: {date|date} files: {files}\n'
o 7 update tags date: * +0000 files: .hgtags (glob)
|
o 6 work in progress date: * -1000 files: letter2.txt (glob)
|
o 5 second letter date: * -1000 files: letter .txt letter2.txt (glob)
|
o 4 update tags date: * +0000 files: .hgtags (glob)
|
o 3 nice day date: * -1000 files: letter .txt (glob)
|
o 2 world date: * -1000 files: letter .txt (glob)
|
o 1 hello date: * -1000 files: letter .txt (glob)
|
o 0 init projB date: * -1000 files: (glob)
$ hg tags -q
tip
v0.2
v0.1
$ cd ..
Test filemap
$ echo 'include letter2.txt' > filemap
$ hg convert --filemap filemap "$SVNREPOURL/proj%20B/mytrunk" fmap
initializing destination fmap repository
scanning source...
sorting...
converting...
5 init projB
4 hello
3 world
2 nice day
1 second letter
0 work in progress
$ hg -R fmap branch -q
default
$ hg log -G -R fmap --template '{rev} {desc|firstline} files: {files}\n'
o 1 work in progress files: letter2.txt
|
o 0 second letter files: letter2.txt
test invalid splicemap1
$ cat > splicemap <<EOF
> $INVALIDREVISIONID $VALIDREVISIONID
> EOF
$ hg convert --splicemap splicemap "$SVNREPOURL/proj%20B/mytrunk" smap
initializing destination smap repository
abort: splicemap entry svn:x2147622-4a9f-4db4-a8d3-13562ff547b2/proj%20B/mytrunk@1 is not a valid revision identifier
[255]
Test stop revision
$ hg convert --rev 1 "$SVNREPOURL/proj%20B/mytrunk" stoprev
initializing destination stoprev repository
scanning source...
sorting...
converting...
0 init projB
$ hg -R stoprev branch -q
default
Check convert_revision extra-records.
This is also the only place testing more than one extra field in a revision.
$ cd stoprev
$ hg tip --debug | grep extra
extra: branch=default
extra: convert_revision=svn:........-....-....-....-............/proj B/mytrunk@1 (re)
$ cd ..
Test converting empty heads (issue3347)
$ svnadmin create svn-empty
$ svnadmin load -q svn-empty < "$TESTDIR/svn/empty.svndump"
$ hg --config convert.svn.trunk= convert svn-empty
assuming destination svn-empty-hg
initializing destination svn-empty-hg repository
scanning source...
sorting...
converting...
1 init projA
0 adddir
$ hg --config convert.svn.trunk= convert "$SVNREPOURL/../svn-empty/trunk"
assuming destination trunk-hg
initializing destination trunk-hg repository
scanning source...
sorting...
converting...
1 init projA
0 adddir