view tests/test-exchange-obsmarkers-case-A4.t @ 33032:8e3021fd1a44

strip: include phases in bundle (BC)

Before this patch, unbundling a stripped changeset would make it a
draft (unless the parent was secret). This meant that one would lose
phase information when stripping and unbundling secret changesets. The
same thing was true for public changesets. While stripping public
changesets is generally rare, it's done frequently by e.g. the
narrowhg extension.

We also include the phases in the temporary bundle, just in case
stripping were to fail after that point, so the user can still restore
the repo including phase information. Before this patch, the phases
were left untouched during the bundling and unbundling of the
temporary bundle. Only at the end of the transaction would
phasecache.filterunknown() be called to remove phase roots that were
no longer valid. We now need to call that also after the first
stripping, i.e. before applying the temporary bundle. Otherwise
unbundling the temporary bundle will cause a read of the phase cache
which has stripped changesets in the cache and that fails.

Like with obsmarkers, we unconditionally include the phases in the
bundle when stripping (when using bundle2, such as when generaldelta
is enabled). The reason for doing that for strip but not for bundle is
that strip bundles are not meant to be shared outside the repo, so we
don't care as much about compatibility.

============================================
Testing obsolescence markers push: Cases A.4
============================================

Mercurial pushes obsolescences markers relevant to the "pushed-set", the set of
all changesets that requested to be "in sync" after the push (even if they are
already on both side).

This test belongs to a series of tests checking such set is properly computed
and applied. this does not tests "obsmarkers" discovery capabilities.

Category A: simple cases
Testcase 4: Push in the middle of the obsolescence chain

A.4 Push in the middle of the obsolescence chain
================================================

.. (Where we show that we should not push the marker without the successors)
..
.. {{{
..   B ◔
..     |
..   A⇠ø⇠○ A'
..     |/
..     ● O
.. }}}
..
.. Markers exist from:
..
..  * `A ø⇠○ A'`
..  * chain from A
..
.. Command runs:
..
..  * hg push -r B
..
.. Expected exchange:
..
..  * Chain from A
..
.. Expected Exclude:
..
..  * `Ai ø⇠○ A'`

Setup
-----

  $ . $TESTDIR/testlib/exchange-obsmarker-util.sh

initial

  $ setuprepos A.4
  creating test repo for test case A.4
  - pulldest
  - main
  - pushdest
  cd into `main` and proceed with env setup
  $ cd main
  $ mkcommit A0
  $ mkcommit B
  $ hg update 0
  0 files updated, 0 files merged, 2 files removed, 0 files unresolved
  $ mkcommit A1
  created new head
  $ hg debugobsolete aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa `getid 'desc(A0)'`
  $ hg debugobsolete `getid 'desc(A0)'` `getid 'desc(A1)'`
  $ hg log -G --hidden
  @  e5ea8f9c7314 (draft): A1
  |
  | o  06055a7959d4 (draft): B
  | |
  | x  28b51eb45704 (draft): A0
  |/
  o  a9bdc8b26820 (public): O
  
  $ inspect_obsmarkers
  obsstore content
  ================
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  $ cd ..
  $ cd ..

Actual Test for first version
-----------------------------

  $ dotest A.4 B -f
  ## Running testcase A.4
  # testing echange of "B" (06055a7959d4)
  ## initial state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  # obstore: pulldest
  ## pushing "B" from main to pushdest
  pushing to pushdest
  searching for changes
  remote: adding changesets
  remote: adding manifests
  remote: adding file changes
  remote: added 2 changesets with 2 changes to 2 files
  remote: 1 new obsolescence markers
  ## post push state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  ## pulling "06055a7959d4" from main into pulldest
  pulling from main
  searching for changes
  adding changesets
  adding manifests
  adding file changes
  added 2 changesets with 2 changes to 2 files
  1 new obsolescence markers
  (run 'hg update' to get a working copy)
  ## post pull state
  # obstore: main
  28b51eb45704506b5c603decd6bf7ac5e0f6a52f e5ea8f9c73143125d36658e90ef70c6d2027a5b7 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pushdest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}
  # obstore: pulldest
  aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa 28b51eb45704506b5c603decd6bf7ac5e0f6a52f 0 (Thu Jan 01 00:00:00 1970 +0000) {'user': 'test'}