destroyed: drop complex branchcache rebuilt logic
The strip code used a trick to lower the cost of branchcache update after a
strip. However is less necessary since we have branchcache collaboration.
Invalid branchcache are likely to be cheaply rebuilt again a near subset of the
repo.
Moreover, this trick would need update to be relevant in the now filtered
repository world. It currently update the unfiltered branchcache that few people
cares about. Make it smarter on that aspect would need complexes update of the
calling logic
So this mechanism is:
- Arguably needed,
- Currently irrelevant,
- Hard to update
and I'm dropping it.
We now update the branchcache in all case by courtesy of the read only reader.
This changeset have a few expected impact on the testsuite are different cache
are updated.
# sshpeer.py - ssh repository proxy class for mercurial
#
# Copyright 2005, 2006 Matt Mackall <mpm@selenic.com>
#
# This software may be used and distributed according to the terms of the
# GNU General Public License version 2 or any later version.
import re
from i18n import _
import util, error, wireproto
class remotelock(object):
def __init__(self, repo):
self.repo = repo
def release(self):
self.repo.unlock()
self.repo = None
def __del__(self):
if self.repo:
self.release()
def _serverquote(s):
'''quote a string for the remote shell ... which we assume is sh'''
if re.match('[a-zA-Z0-9@%_+=:,./-]*$', s):
return s
return "'%s'" % s.replace("'", "'\\''")
class sshpeer(wireproto.wirepeer):
def __init__(self, ui, path, create=False):
self._url = path
self.ui = ui
self.pipeo = self.pipei = self.pipee = None
u = util.url(path, parsequery=False, parsefragment=False)
if u.scheme != 'ssh' or not u.host or u.path is None:
self._abort(error.RepoError(_("couldn't parse location %s") % path))
self.user = u.user
if u.passwd is not None:
self._abort(error.RepoError(_("password in URL not supported")))
self.host = u.host
self.port = u.port
self.path = u.path or "."
sshcmd = self.ui.config("ui", "ssh", "ssh")
remotecmd = self.ui.config("ui", "remotecmd", "hg")
args = util.sshargs(sshcmd, self.host, self.user, self.port)
if create:
cmd = '%s %s %s' % (sshcmd, args,
util.shellquote("%s init %s" %
(_serverquote(remotecmd), _serverquote(self.path))))
ui.note(_('running %s\n') % cmd)
res = util.system(cmd)
if res != 0:
self._abort(error.RepoError(_("could not create remote repo")))
self.validate_repo(ui, sshcmd, args, remotecmd)
def url(self):
return self._url
def validate_repo(self, ui, sshcmd, args, remotecmd):
# cleanup up previous run
self.cleanup()
cmd = '%s %s %s' % (sshcmd, args,
util.shellquote("%s -R %s serve --stdio" %
(_serverquote(remotecmd), _serverquote(self.path))))
ui.note(_('running %s\n') % cmd)
cmd = util.quotecommand(cmd)
self.pipeo, self.pipei, self.pipee = util.popen3(cmd)
# skip any noise generated by remote shell
self._callstream("hello")
r = self._callstream("between", pairs=("%s-%s" % ("0"*40, "0"*40)))
lines = ["", "dummy"]
max_noise = 500
while lines[-1] and max_noise:
l = r.readline()
self.readerr()
if lines[-1] == "1\n" and l == "\n":
break
if l:
ui.debug("remote: ", l)
lines.append(l)
max_noise -= 1
else:
self._abort(error.RepoError(_('no suitable response from '
'remote hg')))
self._caps = set()
for l in reversed(lines):
if l.startswith("capabilities:"):
self._caps.update(l[:-1].split(":")[1].split())
break
def _capabilities(self):
return self._caps
def readerr(self):
while True:
size = util.fstat(self.pipee).st_size
if size == 0:
break
s = self.pipee.read(size)
if not s:
break
for l in s.splitlines():
self.ui.status(_("remote: "), l, '\n')
def _abort(self, exception):
self.cleanup()
raise exception
def cleanup(self):
if self.pipeo is None:
return
self.pipeo.close()
self.pipei.close()
try:
# read the error descriptor until EOF
for l in self.pipee:
self.ui.status(_("remote: "), l)
except (IOError, ValueError):
pass
self.pipee.close()
__del__ = cleanup
def _callstream(self, cmd, **args):
self.ui.debug("sending %s command\n" % cmd)
self.pipeo.write("%s\n" % cmd)
_func, names = wireproto.commands[cmd]
keys = names.split()
wireargs = {}
for k in keys:
if k == '*':
wireargs['*'] = args
break
else:
wireargs[k] = args[k]
del args[k]
for k, v in sorted(wireargs.iteritems()):
self.pipeo.write("%s %d\n" % (k, len(v)))
if isinstance(v, dict):
for dk, dv in v.iteritems():
self.pipeo.write("%s %d\n" % (dk, len(dv)))
self.pipeo.write(dv)
else:
self.pipeo.write(v)
self.pipeo.flush()
return self.pipei
def _call(self, cmd, **args):
self._callstream(cmd, **args)
return self._recv()
def _callpush(self, cmd, fp, **args):
r = self._call(cmd, **args)
if r:
return '', r
while True:
d = fp.read(4096)
if not d:
break
self._send(d)
self._send("", flush=True)
r = self._recv()
if r:
return '', r
return self._recv(), ''
def _decompress(self, stream):
return stream
def _recv(self):
l = self.pipei.readline()
if l == '\n':
err = []
while True:
line = self.pipee.readline()
if line == '-\n':
break
err.extend([line])
if len(err) > 0:
# strip the trailing newline added to the last line server-side
err[-1] = err[-1][:-1]
self._abort(error.OutOfBandError(*err))
self.readerr()
try:
l = int(l)
except ValueError:
self._abort(error.ResponseError(_("unexpected response:"), l))
return self.pipei.read(l)
def _send(self, data, flush=False):
self.pipeo.write("%d\n" % len(data))
if data:
self.pipeo.write(data)
if flush:
self.pipeo.flush()
self.readerr()
def lock(self):
self._call("lock")
return remotelock(self)
def unlock(self):
self._call("unlock")
def addchangegroup(self, cg, source, url, lock=None):
'''Send a changegroup to the remote server. Return an integer
similar to unbundle(). DEPRECATED, since it requires locking the
remote.'''
d = self._call("addchangegroup")
if d:
self._abort(error.RepoError(_("push refused: %s") % d))
while True:
d = cg.read(4096)
if not d:
break
self.pipeo.write(d)
self.readerr()
self.pipeo.flush()
self.readerr()
r = self._recv()
if not r:
return 1
try:
return int(r)
except ValueError:
self._abort(error.ResponseError(_("unexpected response:"), r))
instance = sshpeer