destroyed: drop complex branchcache rebuilt logic
The strip code used a trick to lower the cost of branchcache update after a
strip. However is less necessary since we have branchcache collaboration.
Invalid branchcache are likely to be cheaply rebuilt again a near subset of the
repo.
Moreover, this trick would need update to be relevant in the now filtered
repository world. It currently update the unfiltered branchcache that few people
cares about. Make it smarter on that aspect would need complexes update of the
calling logic
So this mechanism is:
- Arguably needed,
- Currently irrelevant,
- Hard to update
and I'm dropping it.
We now update the branchcache in all case by courtesy of the read only reader.
This changeset have a few expected impact on the testsuite are different cache
are updated.
Set vars:
$ CONTRIBDIR="$TESTDIR/../contrib"
Prepare repo-a:
$ hg init repo-a
$ cd repo-a
$ echo this is file a > a
$ hg add a
$ hg commit -m first
$ echo adding to file a >> a
$ hg commit -m second
$ echo adding more to file a >> a
$ hg commit -m third
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
Dumping revlog of file a to stdout:
$ python "$CONTRIBDIR/dumprevlog" .hg/store/data/a.i
file: .hg/store/data/a.i
node: 183d2312b35066fb6b3b449b84efc370d50993d0
linkrev: 0
parents: 0000000000000000000000000000000000000000 0000000000000000000000000000000000000000
length: 15
-start-
this is file a
-end-
node: b1047953b6e6b633c0d8197eaa5116fbdfd3095b
linkrev: 1
parents: 183d2312b35066fb6b3b449b84efc370d50993d0 0000000000000000000000000000000000000000
length: 32
-start-
this is file a
adding to file a
-end-
node: 8c4fd1f7129b8cdec6c7f58bf48fb5237a4030c1
linkrev: 2
parents: b1047953b6e6b633c0d8197eaa5116fbdfd3095b 0000000000000000000000000000000000000000
length: 54
-start-
this is file a
adding to file a
adding more to file a
-end-
Dump all revlogs to file repo.dump:
$ find .hg/store -name "*.i" | sort | xargs python "$CONTRIBDIR/dumprevlog" > ../repo.dump
$ cd ..
Undumping into repo-b:
$ hg init repo-b
$ cd repo-b
$ python "$CONTRIBDIR/undumprevlog" < ../repo.dump
.hg/store/00changelog.i
.hg/store/00manifest.i
.hg/store/data/a.i
$ cd ..
Rebuild fncache with clone --pull:
$ hg clone --pull -U repo-b repo-c
requesting all changes
adding changesets
adding manifests
adding file changes
added 3 changesets with 3 changes to 1 files
Verify:
$ hg -R repo-c verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
Compare repos:
$ hg -R repo-c incoming repo-a
comparing with repo-a
searching for changes
no changes found
[1]
$ hg -R repo-a incoming repo-c
comparing with repo-c
searching for changes
no changes found
[1]
#if hardlink
Test shrink-revlog:
$ cd repo-a
$ hg --config extensions.shrink="$CONTRIBDIR/shrink-revlog.py" shrink
shrinking $TESTTMP/repo-a/.hg/store/00manifest.i (glob)
reading revs
sorting revs
writing revs
old file size: 324 bytes ( 0.0 MiB)
new file size: 324 bytes ( 0.0 MiB)
shrinkage: 0.0% (1.0x)
note: old revlog saved in:
$TESTTMP/repo-a/.hg/store/00manifest.i.old (glob)
$TESTTMP/repo-a/.hg/store/00manifest.d.old (glob)
(You can delete those files when you are satisfied that your
repository is still sane. Running 'hg verify' is strongly recommended.)
$ hg verify
checking changesets
checking manifests
crosschecking files in changesets and manifests
checking files
1 files, 3 changesets, 3 total revisions
$ cd ..
#endif
Test simplemerge command:
$ cp "$CONTRIBDIR/simplemerge" .
$ echo base > base
$ echo local > local
$ cat base >> local
$ cp local orig
$ cat base > other
$ echo other >> other
changing local directly
$ python simplemerge local base other && echo "merge succeeded"
merge succeeded
$ cat local
local
base
other
$ cp orig local
printing to stdout
$ python simplemerge -p local base other
local
base
other
local:
$ cat local
local
base
conflicts
$ cp base conflict-local
$ cp other conflict-other
$ echo not other >> conflict-local
$ echo end >> conflict-local
$ echo end >> conflict-other
$ python simplemerge -p conflict-local base conflict-other
base
<<<<<<< conflict-local
not other
=======
other
>>>>>>> conflict-other
end
warning: conflicts during merge.
[1]
--no-minimal
$ python simplemerge -p --no-minimal conflict-local base conflict-other
base
<<<<<<< conflict-local
not other
end
=======
other
end
>>>>>>> conflict-other
warning: conflicts during merge.
[1]
1 label
$ python simplemerge -p -L foo conflict-local base conflict-other
base
<<<<<<< foo
not other
=======
other
>>>>>>> conflict-other
end
warning: conflicts during merge.
[1]
2 labels
$ python simplemerge -p -L foo -L bar conflict-local base conflict-other
base
<<<<<<< foo
not other
=======
other
>>>>>>> bar
end
warning: conflicts during merge.
[1]
too many labels
$ python simplemerge -p -L foo -L bar -L baz conflict-local base conflict-other
abort: can only specify two labels.
[255]
binary file
$ python -c "f = file('binary-local', 'w'); f.write('\x00'); f.close()"
$ cat orig >> binary-local
$ python simplemerge -p binary-local base other
warning: binary-local looks like a binary file.
[1]
binary file --text
$ python simplemerge -a -p binary-local base other 2>&1
warning: binary-local looks like a binary file.
\x00local (esc)
base
other
help
$ python simplemerge --help
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal do not try to minimize conflict regions
-h --help display help and exit
-q --quiet suppress output
wrong number of arguments
$ python simplemerge
simplemerge: wrong number of arguments
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal do not try to minimize conflict regions
-h --help display help and exit
-q --quiet suppress output
[1]
bad option
$ python simplemerge --foo -p local base other
simplemerge: option --foo not recognized
simplemerge [OPTS] LOCAL BASE OTHER
Simple three-way file merge utility with a minimal feature set.
Apply to LOCAL the changes necessary to go from BASE to OTHER.
By default, LOCAL is overwritten with the results of this operation.
options:
-L --label labels to use on conflict markers
-a --text treat all files as text
-p --print print results instead of overwriting LOCAL
--no-minimal do not try to minimize conflict regions
-h --help display help and exit
-q --quiet suppress output
[1]