Mercurial > hg
view mercurial/progress.py @ 38737:913ca175c4ae
aggressivemergedelta: document rename and move to `revlog` section
The config does not follow our naming guideline and "Aggressive" is probably a
word to keep away from users.
The option does not truly fit in the `format` section. It can be turned on and
off for existing repository without much consequence regarding compatibility.
A new `revlog` option is created to control behavior related to revlog writing
and reading. We can see multiple other config options that could be migrated
there.
* format.maxchainlen
* experimental.mmapindexthreshold
* experimental.sparse-read.density-threshold (in an updated form)
* experimental.sparse-read.min-gap-size (in an updated form)
In addition, we can foresee at least a couple of sparse-revlog related option
coming too (to reduce delta chain length and increase snapshot reuse)
These two extra options might fit there too. Unless we want to create a
section dedicated to caches and performance.
* format.chunkcachesize
* format.manifestcachesize
For now, we only migrate `optimize-delta-parent-choice` since it is getting
out of experimental. It is too close to the release to move the other one. In
addition, we still lack proper the prioritization of alias that would help
renaming them without bad consequence for users.
(Not fully happy about the `revlog` name but could not find better).
author | Boris Feld <boris.feld@octobus.net> |
---|---|
date | Thu, 19 Jul 2018 10:35:29 +0200 |
parents | b34d0a6ef936 |
children | 6603de284b0a |
line wrap: on
line source
# progress.py progress bars related code # # Copyright (C) 2010 Augie Fackler <durin42@gmail.com> # # This software may be used and distributed according to the terms of the # GNU General Public License version 2 or any later version. from __future__ import absolute_import import errno import threading import time from .i18n import _ from . import encoding def spacejoin(*args): return ' '.join(s for s in args if s) def shouldprint(ui): return not (ui.quiet or ui.plain('progress')) and ( ui._isatty(ui.ferr) or ui.configbool('progress', 'assume-tty')) def fmtremaining(seconds): """format a number of remaining seconds in human readable way This will properly display seconds, minutes, hours, days if needed""" if seconds < 60: # i18n: format XX seconds as "XXs" return _("%02ds") % (seconds) minutes = seconds // 60 if minutes < 60: seconds -= minutes * 60 # i18n: format X minutes and YY seconds as "XmYYs" return _("%dm%02ds") % (minutes, seconds) # we're going to ignore seconds in this case minutes += 1 hours = minutes // 60 minutes -= hours * 60 if hours < 30: # i18n: format X hours and YY minutes as "XhYYm" return _("%dh%02dm") % (hours, minutes) # we're going to ignore minutes in this case hours += 1 days = hours // 24 hours -= days * 24 if days < 15: # i18n: format X days and YY hours as "XdYYh" return _("%dd%02dh") % (days, hours) # we're going to ignore hours in this case days += 1 weeks = days // 7 days -= weeks * 7 if weeks < 55: # i18n: format X weeks and YY days as "XwYYd" return _("%dw%02dd") % (weeks, days) # we're going to ignore days and treat a year as 52 weeks weeks += 1 years = weeks // 52 weeks -= years * 52 # i18n: format X years and YY weeks as "XyYYw" return _("%dy%02dw") % (years, weeks) # file_write() and file_flush() of Python 2 do not restart on EINTR if # the file is attached to a "slow" device (e.g. a terminal) and raise # IOError. We cannot know how many bytes would be written by file_write(), # but a progress text is known to be short enough to be written by a # single write() syscall, so we can just retry file_write() with the whole # text. (issue5532) # # This should be a short-term workaround. We'll need to fix every occurrence # of write() to a terminal or pipe. def _eintrretry(func, *args): while True: try: return func(*args) except IOError as err: if err.errno == errno.EINTR: continue raise class progbar(object): def __init__(self, ui): self.ui = ui self._refreshlock = threading.Lock() self.resetstate() def resetstate(self): self.topics = [] self.topicstates = {} self.starttimes = {} self.startvals = {} self.printed = False self.lastprint = time.time() + float(self.ui.config( 'progress', 'delay')) self.curtopic = None self.lasttopic = None self.indetcount = 0 self.refresh = float(self.ui.config( 'progress', 'refresh')) self.changedelay = max(3 * self.refresh, float(self.ui.config( 'progress', 'changedelay'))) self.order = self.ui.configlist('progress', 'format') self.estimateinterval = self.ui.configwith( float, 'progress', 'estimateinterval') def show(self, now, topic, pos, item, unit, total): if not shouldprint(self.ui): return termwidth = self.width() self.printed = True head = '' needprogress = False tail = '' for indicator in self.order: add = '' if indicator == 'topic': add = topic elif indicator == 'number': if total: add = b'%*d/%d' % (len(str(total)), pos, total) else: add = b'%d' % pos elif indicator.startswith('item') and item: slice = 'end' if '-' in indicator: wid = int(indicator.split('-')[1]) elif '+' in indicator: slice = 'beginning' wid = int(indicator.split('+')[1]) else: wid = 20 if slice == 'end': add = encoding.trim(item, wid, leftside=True) else: add = encoding.trim(item, wid) add += (wid - encoding.colwidth(add)) * ' ' elif indicator == 'bar': add = '' needprogress = True elif indicator == 'unit' and unit: add = unit elif indicator == 'estimate': add = self.estimate(topic, pos, total, now) elif indicator == 'speed': add = self.speed(topic, pos, unit, now) if not needprogress: head = spacejoin(head, add) else: tail = spacejoin(tail, add) if needprogress: used = 0 if head: used += encoding.colwidth(head) + 1 if tail: used += encoding.colwidth(tail) + 1 progwidth = termwidth - used - 3 if total and pos <= total: amt = pos * progwidth // total bar = '=' * (amt - 1) if amt > 0: bar += '>' bar += ' ' * (progwidth - amt) else: progwidth -= 3 self.indetcount += 1 # mod the count by twice the width so we can make the # cursor bounce between the right and left sides amt = self.indetcount % (2 * progwidth) amt -= progwidth bar = (' ' * int(progwidth - abs(amt)) + '<=>' + ' ' * int(abs(amt))) prog = ''.join(('[', bar, ']')) out = spacejoin(head, prog, tail) else: out = spacejoin(head, tail) self._writeerr('\r' + encoding.trim(out, termwidth)) self.lasttopic = topic self._flusherr() def clear(self): if not self.printed or not self.lastprint or not shouldprint(self.ui): return self._writeerr('\r%s\r' % (' ' * self.width())) if self.printed: # force immediate re-paint of progress bar self.lastprint = 0 def complete(self): if not shouldprint(self.ui): return if self.ui.configbool('progress', 'clear-complete'): self.clear() else: self._writeerr('\n') self._flusherr() def _flusherr(self): _eintrretry(self.ui.ferr.flush) def _writeerr(self, msg): _eintrretry(self.ui.ferr.write, msg) def width(self): tw = self.ui.termwidth() return min(int(self.ui.config('progress', 'width', default=tw)), tw) def estimate(self, topic, pos, total, now): if total is None: return '' initialpos = self.startvals[topic] target = total - initialpos delta = pos - initialpos if delta > 0: elapsed = now - self.starttimes[topic] seconds = (elapsed * (target - delta)) // delta + 1 return fmtremaining(seconds) return '' def speed(self, topic, pos, unit, now): initialpos = self.startvals[topic] delta = pos - initialpos elapsed = now - self.starttimes[topic] if elapsed > 0: return _('%d %s/sec') % (delta / elapsed, unit) return '' def _oktoprint(self, now): '''Check if conditions are met to print - e.g. changedelay elapsed''' if (self.lasttopic is None # first time we printed # not a topic change or self.curtopic == self.lasttopic # it's been long enough we should print anyway or now - self.lastprint >= self.changedelay): return True else: return False def _calibrateestimate(self, topic, now, pos): '''Adjust starttimes and startvals for topic so ETA works better If progress is non-linear (ex. get much slower in the last minute), it's more friendly to only use a recent time span for ETA and speed calculation. [======================================> ] ^^^^^^^ estimateinterval, only use this for estimation ''' interval = self.estimateinterval if interval <= 0: return elapsed = now - self.starttimes[topic] if elapsed > interval: delta = pos - self.startvals[topic] newdelta = delta * interval / elapsed # If a stall happens temporarily, ETA could change dramatically # frequently. This is to avoid such dramatical change and make ETA # smoother. if newdelta < 0.1: return self.startvals[topic] = pos - newdelta self.starttimes[topic] = now - interval def progress(self, topic, pos, item='', unit='', total=None): if pos is None: self.closetopic(topic) return now = time.time() with self._refreshlock: if topic not in self.topics: self.starttimes[topic] = now self.startvals[topic] = pos self.topics.append(topic) self.topicstates[topic] = pos, item, unit, total self.curtopic = topic self._calibrateestimate(topic, now, pos) if now - self.lastprint >= self.refresh and self.topics: if self._oktoprint(now): self.lastprint = now self.show(now, topic, *self.topicstates[topic]) def closetopic(self, topic): with self._refreshlock: self.starttimes.pop(topic, None) self.startvals.pop(topic, None) self.topicstates.pop(topic, None) # reset the progress bar if this is the outermost topic if self.topics and self.topics[0] == topic and self.printed: self.complete() self.resetstate() # truncate the list of topics assuming all topics within # this one are also closed if topic in self.topics: self.topics = self.topics[:self.topics.index(topic)] # reset the last topic to the one we just unwound to, # so that higher-level topics will be stickier than # lower-level topics if self.topics: self.lasttopic = self.topics[-1] else: self.lasttopic = None